|
Post by hutton727 on Dec 26, 2011 21:25:49 GMT -5
|
|
jm628
Future Icon
Posts: 11
|
Post by jm628 on Dec 26, 2011 22:47:20 GMT -5
^^ Funny the crumple zones are filled in.
|
|
|
Post by codyanno09 on Dec 27, 2011 4:11:09 GMT -5
Anyone know the number of inches Of weld required for this swap?
|
|
|
Post by cutwhat on Dec 27, 2011 10:13:36 GMT -5
It would take more than 12" to do it right. Atleast for me to be safe running one.
|
|
|
Post by 166ffbrad on Dec 27, 2011 14:09:51 GMT -5
I agree 12 in is not enough you can not everything enough so its all strong
|
|
|
Post by 166ffbrad on Dec 27, 2011 14:10:55 GMT -5
weld everything sorry
|
|
|
Post by codyanno09 on Dec 27, 2011 14:36:28 GMT -5
12" or 18" or 24" what's the minimum
|
|
|
Post by 02robert on Dec 27, 2011 18:26:40 GMT -5
Unlike the picture above most guys around here weld the upper a-arm on 03's solid to the frame. To me that seems like it would put to much stress on the other steering components? Any input on this? Thank you much!
|
|
|
Post by 02robert on Dec 27, 2011 18:28:57 GMT -5
Also, what is the hype about a natural gas frame compared to a regular 03?
|
|
|
Post by poorwhitetrash on Dec 28, 2011 15:19:32 GMT -5
^^^^^ is that a bolt in cradle
|
|
5150x
Future Icon
Posts: 142
|
Post by 5150x on Dec 28, 2011 15:29:57 GMT -5
yes it is
|
|
|
Post by poorwhitetrash on Dec 28, 2011 16:26:51 GMT -5
have u ran it yet? how did it hold up.
|
|
dpi
Heat Winner
Posts: 175
|
Post by dpi on Dec 28, 2011 16:35:39 GMT -5
It's my brothers. Ran it at Blizzard Bash, blew a rear end in the first heat, timed out on the berm in the second. Didn't have much of a chance to punish it.
|
|
|
Post by poorwhitetrash on Dec 28, 2011 18:21:41 GMT -5
hmmm ok. thats a trick imma have to keep in mind
|
|
|
Post by moparfan on Dec 29, 2011 18:09:45 GMT -5
got an 03 vic i have to run the aluminum cradle but im allowed to change steering upper and lower A-arms. has anybody done this and is it worth doing it?
|
|