IMP
Heat Winner
Posts: 324
|
Post by IMP on Aug 24, 2011 18:26:05 GMT -5
everything about mopar wheels
|
|
WILSON'S INC.
Heat Winner
I am so sick of resto guys wasting good derby parts.
Posts: 779
|
Post by WILSON'S INC. on Oct 4, 2011 2:59:17 GMT -5
got a pair of these in a Charger I just picked up, they tough enough for derby?
|
|
|
Post by lazenby23 on Oct 4, 2011 10:30:45 GMT -5
are they cast ?
|
|
WILSON'S INC.
Heat Winner
I am so sick of resto guys wasting good derby parts.
Posts: 779
|
Post by WILSON'S INC. on Oct 4, 2011 11:41:39 GMT -5
they are steel.
|
|
|
Post by derbydan on Oct 4, 2011 11:46:00 GMT -5
Try em and see. That is really the only way to tell is through trial and error
|
|
WILSON'S INC.
Heat Winner
I am so sick of resto guys wasting good derby parts.
Posts: 779
|
Post by WILSON'S INC. on Oct 4, 2011 12:25:47 GMT -5
I agree, was just hoping someone trial and errored before me since I have to pay to get all my tires mounted and dismounted, and for fear of losing a new tire.
|
|
|
Post by derby111 on Oct 11, 2011 9:15:53 GMT -5
i just got some jeep rims that look alot like a chevy ss rim. has anyone ever used these?
|
|
|
Post by derbydan on Oct 11, 2011 11:47:00 GMT -5
I agree, was just hoping someone trial and errored before me since I have to pay to get all my tires mounted and dismounted, and for fear of losing a new tire. I know exactely what you mean.
|
|
|
Post by rundle on Oct 12, 2011 18:10:34 GMT -5
FREAK SHOW Alot of the local derby guys around here are running those instead of ss rims now and i havent seen one bend yet. If i could get my hands on them i would sure run them
|
|
swervin
Feature Winner
The more I drink the smarter I get
Posts: 1,290
|
Post by swervin on Oct 12, 2011 18:48:10 GMT -5
FREAK SHOW Alot of the local derby guys around here are running those instead of ss rims now and i havent seen one bend yet. If i could get my hands on them i would sure run them They don't bend will break the ends of a stock 8 1/4 off. This cat ran them on there and it broke both wheels off in 1 shot FULL TRACK against the wall. This is the best pic I got. ;D
|
|
|
Post by derbydriver666 on Oct 12, 2011 20:45:12 GMT -5
had 1 of them JEEP wheels like SS's get junked with a 4 Ply on iton a stock 8.8 Ford rear.....maybe just bad luck but ive stayed away from them since then
|
|
WILSON'S INC.
Heat Winner
I am so sick of resto guys wasting good derby parts.
Posts: 779
|
Post by WILSON'S INC. on Oct 13, 2011 0:22:36 GMT -5
FREAK SHOW Alot of the local derby guys around here are running those instead of ss rims now and i havent seen one bend yet. If i could get my hands on them i would sure run them They don't bend will break the ends of a stock 8 1/4 off. This cat ran them on there and it broke both wheels off in 1 shot FULL TRACK against the wall. This is the best pic I got. ;D Thanks for the info and help guys, I will put them on the front of one this year and give them a whirl.
|
|
67X
Feature Winner
Vision Without Execution Is Just Hallucination
Posts: 1,000
|
Post by 67X on May 6, 2012 9:24:44 GMT -5
Hi guys. I'm needing some measurements off of a full frame Imperial.
I need the inside diameter of a stock full framer rim as well as the diameters of the front and rear hubs on the car.
Thanks for the help guys.
Nate.
|
|
|
Post by PlumCrazy44 on Oct 25, 2012 8:57:21 GMT -5
What's the easiest way to run ss wheels on the front of a shocker without going to a wheel center?
|
|
dm440c
Feature Winner
derby drivers against drama- there's no crying in demo derby!
Posts: 2,824
|
Post by dm440c on Oct 25, 2012 10:34:33 GMT -5
swap in 67-73 Imperial spindles to get the 5 on 5" bolt pattern
|
|