|
Post by FIRSTER68 on Jan 18, 2012 19:45:43 GMT -5
this one used offsetting upper trailing arms with a gm 10..held up ok
|
|
|
Post by FIRSTER68 on Jan 18, 2012 19:49:55 GMT -5
and here is my favorite way to get a good rearend under caddy''lol leafspring help everything and hold up great
|
|
|
Post by FIRSTER68 on Jan 18, 2012 19:56:07 GMT -5
|
|
|
Post by FIRSTER68 on Jan 18, 2012 20:09:02 GMT -5
and here is another way to get rid of caddy rearend ;D
|
|
|
Post by orangecaddy76 on Jan 18, 2012 21:34:51 GMT -5
is that a 73 or a74 fleetwood clip? what body ? i done one that was a 73 clip 72 olds wagon back with a 76 caddy body
|
|
|
Post by FIRSTER68 on Jan 18, 2012 22:10:20 GMT -5
74 caddy front frame..71 chevy wagon rear frame..76 olds wagon body
|
|
|
Post by FIRSTER68 on Jan 18, 2012 22:42:28 GMT -5
is that a 73 or a74 fleetwood clip? what body ? i done one that was a 73 clip 72 olds wagon back with a 76 caddy body dangerous dane put this one together for me
|
|
Rehse17x
Heat Winner
"Here 4 U 2 Hate"
Posts: 518
|
Post by Rehse17x on Jan 18, 2012 22:47:12 GMT -5
how did the olds clip fit? i've heard that they aint to bad?
|
|
|
Post by FIRSTER68 on Jan 18, 2012 23:00:21 GMT -5
all bolt holes for where they bolt to firewall fit and are there..coresuport mounts can be done with factory caddy taps or cut hole intop of frame and use olds factory holes..i prefer to use olds factory holes with 1 inch althread..and then just trim wheel opening alittle
|
|
|
Post by FIRSTER68 on Jan 18, 2012 23:15:23 GMT -5
this is the best picture i got on how olds coresupport fits
|
|
|
Post by jugulator on Jan 19, 2012 10:48:35 GMT -5
and here is another way to get rid of caddy rearend ;D frankin frame,,,,,,, nice,,,,, we can't do that around here any more,,, people got out of hand with them,, ;D
|
|
undertaker11
Heat Winner
get in, buckle up, and hold the hell on!!!!
Posts: 413
|
Post by undertaker11 on Jan 19, 2012 14:46:02 GMT -5
and here is another way to get rid of caddy rearend ;D where exactly did you form the 2 sections of frame together? did you do it just in front of the brace that runs from side to side that's in front of where the leafs go in the frame.?
|
|
|
Post by FIRSTER68 on Jan 19, 2012 15:07:02 GMT -5
and here is another way to get rid of caddy rearend ;D where exactly did you form the 2 sections of frame together? did you do it just in front of the brace that runs from side to side that's in front of where the leafs go in the frame.? it could have been as simple as putting them together at body mount bolt hole by driver seat area but both front and rear frame sections where pre run so there was some other pieces of frame replaced in damaged spots ..
|
|
|
Post by edwards7x on Jan 20, 2012 20:17:54 GMT -5
|
|
|
Post by 0cents on Feb 9, 2012 10:34:37 GMT -5
is this the car with gm a arms on it?
|
|