|
Post by DerbyKing88s on Oct 21, 2018 22:09:58 GMT -5
Congrats man! Pull that front end down weld it back together and plate it, rest of the car looks good, go get another
|
|
|
Post by dean88 on Oct 22, 2018 10:47:32 GMT -5
A Suicide Door driver complimented how hard the caddy hit. The only plate the car had was a 4x5 piece in front of each S curve over the 3 bolt holes for the steering Gbox.
|
|
|
Post by dean88 on Nov 18, 2018 17:53:01 GMT -5
|
|
|
Post by cowdoc on Nov 19, 2018 23:00:08 GMT -5
Id probably run it again
|
|
|
Post by Luke Wells on Nov 20, 2018 4:28:17 GMT -5
I thought the same exact thing. Little massaging and welding and she'll be fine.
|
|
|
Post by dean88 on Nov 20, 2018 7:30:16 GMT -5
The pics are deceiving. The rear is completely trashed. Humps are fine but if I pull it down all the sheet metal will disintegrate because the car started life as a bone stock and has zero welding or all thread in the trunk.
The front is in worse shape than it looks. One of the hits went under my bumper and hit the radius rod crossmember and fubared it bad. The passenger side frame has 3 bends and is pushed backwards about and inch or two. It's also swayed the frame to the right a little bit.
|
|
|
Post by cowdoc on Nov 22, 2018 7:58:57 GMT -5
|
|
|
Post by DerbyKing88s on Mar 12, 2019 8:51:22 GMT -5
|
|
|
Post by redneckracing12 on Mar 13, 2019 0:05:57 GMT -5
Got camber?
|
|
|
Post by DerbyKing88s on Mar 13, 2019 6:58:07 GMT -5
Ya it’s how the spindles are made, top of spindle is tight to the frame
|
|
lincoln
Feature Winner
Posts: 3,176
|
Post by lincoln on Mar 13, 2019 18:19:57 GMT -5
Looks like your rear wheels are hanging way out there
|
|
|
Post by DerbyKing88s on Mar 13, 2019 18:45:28 GMT -5
Still inside the body, foamed any way plus they are 14 bolts with axle savers
|
|
|
Post by smashford on Mar 13, 2019 23:13:07 GMT -5
Why would the spindle be made that way?
|
|
|
Post by DerbyKing88s on Mar 14, 2019 7:20:24 GMT -5
Not sure, top of spindle is tight to the frame so it’s as good as it’s going to get
|
|
|
Post by dean88 on Mar 14, 2019 8:04:20 GMT -5
What spindle is that, old Fomoco?
|
|