|
Post by DerbyKing88s on Apr 12, 2018 9:35:01 GMT -5
IMO the gm hybrids are better than the 9 inches
|
|
|
Post by rhull1977 on Apr 12, 2018 10:53:40 GMT -5
Looking to swap a 9" rearend into a metric, is a specific legth to look for or any passenger car 9" will work? Seventies full size fits reasonably.
|
|
|
Post by trackshot42 on Apr 12, 2018 16:21:53 GMT -5
Looking to swap a 9" rearend into a metric, is a specific legth to look for or any passenger car 9" will work? Seventies full size fits reasonably. That's what I has hoping to hear found one out of a Torino that I'm looking to use
|
|
jtw11
Future Icon
Posts: 63
|
Post by jtw11 on May 15, 2018 23:37:09 GMT -5
Hey guys going to run a 80s grand prix in a stock show? Any quick tips... thanks
|
|
demoboy333
Feature Winner
Enter your message here...
Posts: 3,124
|
Post by demoboy333 on May 16, 2018 6:25:10 GMT -5
|
|
|
Post by jbsmashtyme on Jun 5, 2018 11:34:39 GMT -5
I have a 94 Caprice with the 4.3 V8. Do regular Chevy headers fit these motors?
|
|
|
Post by cheezwhiz31 on Jun 5, 2018 13:38:35 GMT -5
i'm going to say yes. I looked up headers for that liter engine and looks like it crosses with the other more common style.
|
|
|
Post by jbsmashtyme on Jun 6, 2018 6:31:40 GMT -5
OK. Thanks.
|
|
|
Post by fallinskiestwice on Jun 8, 2018 16:32:20 GMT -5
86 caprice bone stock with a 305 tbi. Anybody know what fuel pressure they run at? Figuring out what pump i should use. Haven't messed with it yet just getting an idea. Thanks in advanced.
|
|
|
Post by Ed Becker on Jun 8, 2018 17:06:29 GMT -5
86 caprice bone stock with a 305 tbi. Anybody know what fuel pressure they run at? Figuring out what pump i should use. Haven't messed with it yet just getting an idea. Thanks in advanced. Google says 9-13 PSI.
|
|
|
Post by fallinskiestwice on Jun 8, 2018 21:01:28 GMT -5
86 caprice bone stock with a 305 tbi. Anybody know what fuel pressure they run at? Figuring out what pump i should use. Haven't messed with it yet just getting an idea. Thanks in advanced. Google says 9-13 PSI. Thanks, couldn't find it.
|
|
|
Post by rhull1977 on Jul 2, 2018 19:49:03 GMT -5
I browsed through but didn't see anything. Has anyone ever used the rear stub off a Vic or anything else on one of these? I have one the rear rails are rotted and wanted to make to rear a little more predictable.
|
|
demoboy333
Feature Winner
Enter your message here...
Posts: 3,124
|
Post by demoboy333 on Jul 2, 2018 20:23:10 GMT -5
If your rules allow it I would. I saw a bubble vic with a 72 impala stub under it. Rear rolled good.
|
|
|
Post by rhull1977 on Jul 2, 2018 21:00:35 GMT -5
Most places I run wouldn't know.
|
|
|
Post by DerbyKing88s on Jul 2, 2018 21:05:26 GMT -5
Well Vic rears are way better than metric gm’s so I mean u be making the car better
|
|