Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Dec 26, 2011 15:19:55 GMT -5
I tried last yr to get back into the big cars but they are to much crying whining and politics... I'll stick with the little cars and if they want some of these W bodies I run it against there promods I will just add more to my W body they all think we cheat em up anyways. ;D
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Dec 26, 2011 15:21:16 GMT -5
But when I do cheat one up it will be HTFO.
|
|
|
Post by STROMI 121 on Dec 26, 2011 20:33:32 GMT -5
i think id either trade the aleros in on some luminas or pull the subs and put a lumina sub in them. Ive looked these cars over at the local junkyard and they dont look very impressive for how big the bodies are. They are not bad, just not as good as a w body.
|
|
|
Post by ducky29 on Dec 27, 2011 10:27:18 GMT -5
finally got my pointy on mine
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Dec 27, 2011 11:42:02 GMT -5
Holy chit Ducky that thing looks like it has a school bus pointy on the front... Hope it don't overheat from no air movement... Lol
|
|
|
Post by 18tcompact on Dec 28, 2011 9:20:07 GMT -5
Holy chit Ducky that thing looks like it has a school bus pointy on the front... Hope it don't overheat from no air movement... Lol Way to much bumper tho. That car will snoot fast
|
|
|
Post by widefrickenopen on Dec 28, 2011 11:09:31 GMT -5
Can u make the 3100 carb I've seen pics of the 3.1 but not the 3100 any tips on how idv appreciate it thanks
|
|
|
Post by fatboyexpress on Dec 28, 2011 14:48:56 GMT -5
Can u make the 3100 carb I've seen pics of the 3.1 but not the 3100 any tips on how idv appreciate it thanks yes i did it i got pics pm me ur number
|
|
|
Post by runinoutofgas on Dec 28, 2011 15:57:28 GMT -5
Can u make the 3100 carb I've seen pics of the 3.1 but not the 3100 any tips on how idv appreciate it thanks I hAvent done it to 3100, but it would be the same idea, and there is a dummy shaft with a distributor gear to run oil pump just like 3.1.
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Dec 28, 2011 20:25:07 GMT -5
Holy chit Ducky that thing looks like it has a school bus pointy on the front... Hope it don't overheat from no air movement... Lol Way to much bumper tho. That car will snoot fast If done right the front will hold up to a pointy but most rules only allow certain things done but what I'm saying is with "STOCK" pieces and parts you can do it.
|
|
|
Post by ducky29 on Dec 28, 2011 21:20:27 GMT -5
with the rules i have it should hold up to alot but im planning on alot of wheel shots
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Dec 28, 2011 21:25:14 GMT -5
I know that will hold up
|
|
|
Post by Bullet84 on Dec 29, 2011 7:47:19 GMT -5
any one got a wiring diagram for push button start to bypass the key?
|
|
|
Post by Krazy12 on Dec 29, 2011 21:22:18 GMT -5
o2 sensor needed? car cuts out above 4k now, after i took exhaust off i also stripped it all too so i dont know if it was o2 or some wires
|
|
|
Post by STROMI 121 on Dec 29, 2011 21:29:43 GMT -5
I always run the O2 sensors. First one installed in the exhaust and the second one not installed in the exhaust just zip tied up somewhere. This allowes the computer to adjust the lean/rich mixture and it thinks the cat is still there. I have heard of people running without them but I had no luck when I tried it myself.
|
|