|
|
Post by DerbyKing88s on Feb 1, 2019 1:08:52 GMT -5
Yes they tear the rectangular piece out of the bottom side the solid mounts correct? |
|
|
|
Post by cheezwhiz31 on Feb 1, 2019 11:04:19 GMT -5
|
|
9r
Future Icon
Posts: 48 
|
Post by 9r on Feb 1, 2019 11:18:13 GMT -5
That’s what I did with the mount I linked. |
|
|
|
Post by DerbyKing88s on Feb 1, 2019 11:21:24 GMT -5
Thanks guys
|
|
|
|
Post by crusher71 on Feb 1, 2019 18:10:02 GMT -5
THE POLY ONES WILL RIP, BEEN THERE. THE SOLID ONES WILL HELP BREAK OTHER STUFF..... TRANSMISSIONS WERE NOT DESIGNED TO BE A STRUCTURAL MEMBER OF THE FRAME...NOT TELLING WHAT I USE NOW, BUT I DONT HAVE ANY MORE ISSUES...
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Feb 1, 2019 18:33:30 GMT -5
I always run the $30 red neoprene chinamaneese transmission mounts from the local parts store. On everything I run. They work well and have some give. I think energy suspension of someone like that makes them. They are hanging on the wall right next to the Chinese chrome air cleaners. U talking bout them 45hp gain filters? |
|
|
|
Post by redneckracing12 on Feb 1, 2019 19:19:30 GMT -5
You can do something similar to this, only instead of the allthread as the attachment point, sandwich the mount on the front side of the crossmember and pressurize the nuts out of it.   |
|
|
|
Post by STROMI 121 on Feb 1, 2019 23:59:18 GMT -5
Depending on your rules, you are only limited by your imagination.
|
|
|
|
Post by DerbyKing88s on Feb 2, 2019 0:35:48 GMT -5
You can do something similar to this, only instead of the allthread as the attachment point, sandwich the mount on the front side of the crossmember and pressurize the nuts out of it. I like that idea. Going to use a bowed 2x2 thickwall crossmember but couldn’t figure out how to mount the trans mount in a way that it is least likely to rip/bend. Using HRT steel bell and trans protector   |
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Feb 5, 2019 8:17:05 GMT -5
🤦♂️...that’s not a trans...that is,...that is craziness,lol
|
|
|
|
Post by DerbyKing88s on Feb 5, 2019 9:27:40 GMT -5
🤣 you’ll love our other transmissions we’re building lol
|
|
