Post by Byron34 on Aug 5, 2018 3:03:50 GMT -5
On Sunday August 19th at the Juneau county fair in Mauston Wi. there will be powerwheels, combines,full size van grudge match and 2 BONE STOCK heats both paying 1st 1000 2nd 500 and 300 for 3rd. Along with trophies for all 3 and best looking vehicle and driver of the day.
The first heat will be for minivans and 2wd mini trucks (astro vans run with 4wd trucks and suvs) 2nd heat is for 4wd mini trucks astro vans and mini suvs. Entry fee is free but everyone in the pits must have a pit pass which are $20.
This is a Simple build with no welding except for what's allowed in the rules!
Chain only 2 per vertical seam on driver's door others 1 per vertical seam. Hoods can have 4 chains holding them down, front 2 can go to bumper 36" max. One safety bar behind seat , may be bolted or welded in. Regular cab trucks must have something behind seat to prevent head from coming out of the rear window. Bumpers that came on vehicles must be used no swapping. Tailgate/ back hatch 2 chains per vertical seam. 2 chains or metal straps must go from the roof to the firewall in windshield area, the can be bolted or welded in.
Tires must be d.o.t. stamped, no forklift, skid loader or implement tires allowed. Stock rims no weld in centers or bead locks allowed. Tubes and valve stem protectors are ok. No tire flaps allowed.
Engine and trans must be stock for vehicles... no swapping allowed! Headers are ok. Floor shifters are ok. No sliders allowed. Rearend may be welded. Front driveshaft on 4wd vehicles must be removed.
Gas tank must be removed and a 5 gallon boat tank or fuel cell placed in back seat area or in box of truck up to the cab.
Battery must be moved into front seat area either in the seat or on the floor.
Any questions message me here or 608-350-6183 is my number.
The first heat will be for minivans and 2wd mini trucks (astro vans run with 4wd trucks and suvs) 2nd heat is for 4wd mini trucks astro vans and mini suvs. Entry fee is free but everyone in the pits must have a pit pass which are $20.
This is a Simple build with no welding except for what's allowed in the rules!
Chain only 2 per vertical seam on driver's door others 1 per vertical seam. Hoods can have 4 chains holding them down, front 2 can go to bumper 36" max. One safety bar behind seat , may be bolted or welded in. Regular cab trucks must have something behind seat to prevent head from coming out of the rear window. Bumpers that came on vehicles must be used no swapping. Tailgate/ back hatch 2 chains per vertical seam. 2 chains or metal straps must go from the roof to the firewall in windshield area, the can be bolted or welded in.
Tires must be d.o.t. stamped, no forklift, skid loader or implement tires allowed. Stock rims no weld in centers or bead locks allowed. Tubes and valve stem protectors are ok. No tire flaps allowed.
Engine and trans must be stock for vehicles... no swapping allowed! Headers are ok. Floor shifters are ok. No sliders allowed. Rearend may be welded. Front driveshaft on 4wd vehicles must be removed.
Gas tank must be removed and a 5 gallon boat tank or fuel cell placed in back seat area or in box of truck up to the cab.
Battery must be moved into front seat area either in the seat or on the floor.
Any questions message me here or 608-350-6183 is my number.
