|
Post by DerbyKing88s on Jun 2, 2018 17:52:55 GMT -5
Trying to put ball joints and a arms in, when we tighten ball joint down the spindle doesn’t want to turn What can I do to fix this
|
|
|
Post by dean88 on Jun 2, 2018 17:57:33 GMT -5
I'm assuming when it tightens down the spindle is wedged against the spring pocket?
|
|
|
Post by dean88 on Jun 2, 2018 17:59:42 GMT -5
Or after second look is it because of the difference in angles from the lower and upper A arms.
|
|
Landshark007
Feature Winner
I'm not here to win I'm here to make sure you don't win
Posts: 4,229
|
Post by Landshark007 on Jun 2, 2018 18:13:09 GMT -5
Looks like hole not big enough for taper
|
|
|
Post by DerbyKing88s on Jun 2, 2018 18:17:38 GMT -5
Or after second look is it because of the difference in angles from the lower and upper A arms. That’s possibly what we thought
|
|
|
Post by DerbyKing88s on Jun 2, 2018 18:17:51 GMT -5
Looks like hole not big enough for taper upper or lower
|
|
|
Post by DerbyKing88s on Jun 2, 2018 18:24:01 GMT -5
Sliced a arm, straightened everything, turns freely, thanks for tips guys, stress level went down a lot
|
|