*7th annual "Obsession with Destruction" 2017 demo derby*

[hemi1]

Obsession with Destruction demolition derby

Location: Boscobel Antique Club Grounds Boscobel,WI. 53805

Date: Saturday September 30th,2017

Time: 1:30 pm power wheels for the kids,regular derby starts at 2:00 pm.

"Old School" fullsize rules are posted in the National Event section on here.

Guaranteed Payout for that class is:

$3,000 - trophy
$1,000 - trophy
$750 - trophy
$500 - trophy
$250 - trophy

Also the "Ultimate Destruction" driver will get money and a nice trophy.

FREE entry to the driver who travels farthest distance to compete in this class and is pre registered.

* All other rules and classes are posted below on this thread.

[25young]

When is rules and stuff coming out

[hemi1]

Jan 12, 2017 19:36:12 GMT -5 25young said:

When is rules and stuff coming out

patience,got to have a little patience...

[25young]

You must have something good planed for this year if no rules out yet lol

[hemi1]

____________________________________________ * Street Stock Fullsize truck class * __________________________________________________________


$60 entry: 100% payback,top 3 get trophies. With 10 entries we will pay $400 to win and 3 spots. More entries equals more money back to the drivers.

* Only ½ or 3/4 tons allowed. Suburbans and fullsize vans are allowed to compete. NO 1 ton dually suspensions or frames allowed.No ambulance frames allowed.If the inspectors suspect a 1 ton or bigger truck frame,it will be the drivers responsibility to have written proof by frame code and vin number it isnt,or you won't compete. 4wd drive trucks must remove the front driveshaft to compete.

* NO welding on the frame allowed.If vehicle is a 4wd you must remove front driveshaft to make it 2wd only.

* All windows, interior, chrome trim, plastic, lights must be removed before event.

*Engine and transmission:
- You may use aftermarket headers.NO distributor protectors allowed. You may have a basic engine cradle for mounting engine in,or 2 chains bolted or welded to factory engine cradle. No diesel engines allowed .No radi barrels allowed.No tranny braces allowed.You may use a homemade floor shifter. You may use a tranny cooler. you may use a slider driveshaft.

* Doors:
- Drivers and passenger door may be welded solid, other doors only 2 chains max per seam.


* Tires and Rims:
33” max tire height limit.Must be a DOT tire. Rims must be factory stock rim. NO split rims allowed. NO home made 1 piece rims allowed. All wheel weights must be removed.
- NO Skid steer, fork lift and tractor tread tires are allowed. You may use tubes in your tires.

* Suspension:
- Must be stock, no aftermarket lift kits allowed. Leaf springs must
be stock. NO homemade leaf springs or brackets allowed. 20” minimum or 26” max height measured from ground to bottom of the bumper.

* Truck boxes:
- Must be OEM, NO homemade boxes or flatbeds allowed.
- NO wedged boxes or sedagons.Tailgate may be welded or chained in factory upright location.1- 3"x12" long plate or 2 chains per verticle seam only.
- You may add 4 - ¾” additional bolts with 6"x6" plates in the box to the frame for safety. The 4
Additional bolts in bed must be bolted or welded vertically to the frame. You
also may secure front of box to the cab by using 1 chain on each side or 1 – 3” by 8” plate per side. This rule is for driver’s safety since a steel boat tank or fuel cell will be mounted in the front middle of the factory truck box. Fuel line must be ran safely thru piece of round or square steel tubing where it goes between front of box and rear of cab for drivers safety.


* Body bolts:
- Can be changed to 3/4",you can use up to 6"x6" washers for each .Core support bolts can be changed to 3/4".


* Hood:
- Can have 6 tie downs total.(6 chains, OR 6- ¾” max bolts, ONLY 2 of
the points can be attached to the frame in core support area. 6” plates for
bolts or all thread max.)...If not using headers thru hood you must have a 12" hole cut in hood incase of fire.

*Front Bumpers:
- Must be a stock factory truck or automobile front bumper. No chrysler V or home made tube steel bumpers allowed.

* Rear bumpers:
- must be factory OEM equipment,
NO car bumpers, C-channel or round or square pipe rear bumpers allowed on rear of
trucks.

* SAFETY:
- Gas Tank must be mounted securely in the front center part of box.
- Battery must be securely mounted in passenger area of cab.
- You may install a basic 4
point cage (dash, seat and door bars).No down bars allowed. You may use 2 chains or pieces of 3’’ strap steel in windshield area for drivers protection.




___________________________ * Stock Compact/midsize class rules * ________________________________________________________

$60 entry: $600 guaranteed for 1st place, top 3 will get paid plus trophies. We get 20 entries top 5 will get paid. With 25 entries 1st place will be $800 guaranteed.

* Frames:
- NO welding on frames. Must remain completely stock.

* Wheelbase:
111'' max. or less, front wheel drives only.


* Engines:
- Must be 4 or 6 cylinders only. Can use header thru hood.

*All windows, interior, lights, plastic must removed before competition.

* Battery and gas tank: must be relocated inside car and securely fastened to
Floorboard. Only steel boat tanks or fuel cells allowed in competition.


* Front bumper:
- Front bumper must remain the stock compact/midsize front bumper.You may weld the factory stock front bumper directly to the front frame rails,do not put square tubing or bumper shocks inside frame rails. NO fullsize or tube steel front bumpers in this class . Rear bumper must remain stock or be taken off.

* 4 point cage may be used:
- We highly recomend atleast a seat bar from door post to door post. Must be welded or bolted in.
A seat bar, dash bar, and door bars. You may have a
Rollover bar mounted off seat bar also. You may have a gas tank protector around gas tank or fuel cell. Gas tank protector can be attached to seat bar only.24” wide max and have at least 1” between protector and sheet metal.
You must have 2 chains,wires, or 2 pieces of metal strap steel in windshield area verticaly for drivers safety.
* Doors:
- Drivers door may be welded solid. All other doors can have 3 chains per door,1 chain per seam.


* Hoods:
- Must have a 12” hole cut in them incase of fire. You may use 4 chains or wires to secure hood.

* Trunks:
- Trunks can be secured in 4 spots. 4 chains or 4 wires.


* Suspension: must be completely stock.

* Tires:
30” max height, 8 ply or less dot tire allowed, but NO tractor
tread, forklift or skid steer tires allowed. You may use tubes in your tires. No tire flaps allowed(NO extra rubber or extra sidewalls between rim and sidewall of factory tire). Be sure to remove all wheel weights before inspection.
- Rims must be stock automotive type.NO one piece solid home made rims allowed.

* This class intended for people to have fun without spending lots of time or money.



__________________________ * Compact truck/mini SUV/Mini van heat * _____________________________________________

$60 entry: 100% payback, top 3 get trophies. With 10 entries we will pay $400 to win and top 3 spots. More entries equals more money back to the drivers.

* Engine:
- Must be 4 or 6cyl. No V8's allowed, and engine must be left stock. Can use headers up thru hood.

*4wd’s must remove front driveshaft.

*Body Bolts: Must remain factory.Do not change them.

* Doors:
- Drivers door can be welded solid. All Other doors can have 1 chain or wire per door seam.

*Suspension: must remain factory stock.Leaf Springs must remain stock and in stock location.



* Safety:
- You can have a basic 4 point cage (seat bar, dash bar, and door bars) for drivers safety. A seat bar is mandatory. tubing can be up to 3” by 3” in diameter. You can have a gas tank protector,no wider than 24'' wide and must be attached to seat bar only.You may add a halo bar incase of a roll over.Must be attached to seat bar only,not frame.


* Tailgate and hatches:
- Tailgate must remain vertical and in factory position or taken off. 2 chains or 2 wires

* Truck box:
- Sides of factory truck box must remain vertical, NO wedged boxes
allowed for safety reasons. Front of box may be chained to back of cab for safety.

* Tires and rims:
- Must be DOT tires.NO skid steer, forklift or tractor tread tires are allowed. 31” max
height. You may use tubes in your tires. Remove all wheel weights before
inspection. Rims must be stock. No one piece home made rims allowed.

* Hoods:
- Can have 4 chains or 4 threaded rods max. Only 2 threaded rods can go to frame in core support area. Threaded rod can be up to 1'' in diameter. Hood
plates for threaded rod can be 6”x6” max. you must have a 12" hole cut in hood incase of fire.

* Front Bumpers:
must be left factory stock. NO automotive or home made tube steel front bumpers allowed.

* Rear bumper:
- Must remain OEM or be taken off. No trailer hitches or brackets allowed. They must be completely removed before inspection.

* Frames:
- No welding allowed anywhere on frame.

* Battery:
- The battery must be relocated inside passenger side floorboard area of
Vehicle and securely mounted.

* Gas tank:
- The gas tank must be in the front part of the box. Mini vans and small SUV's must have gas tank behind the driver’s seat. Gas tank and fuel lines must be securely mounted.

- These rules are meant to keep this class cheap and fun to compete in for everybody.



_____________________________ * BUILT compact/midsize car class * __________________________________________________

$70 entry: payout based on 25 entries $1,000,400,200,100,70 plus top 3 get a trophy.

* All windows, interior, carpet, plastic headlights must be removed before inspection.

*Frames:
- Frame seams can be welded A-arms forward. Can put a piece of square tubing inside frame rails A-arms forward to mount front bumper on.

*Wheelbase:
111” max. or less for front wheel drives.
106” max or less for rear wheel drives.

*Engines:
- Must be 4 or 6 cyl. Only. No radi barrels allowed. Headers thru hood are ok.

*Battery and gas tank:
- Must be relocated inside car and securely fastened to floorboard. Only steel boat tanks or fuel cells allowed in competition.

*Front bumper:
- May be changed to any automotive bumper may be used. You can seam weld all bumper seams, you can hard nose front bumper to the front frame rails with no additional metal.
OR you can use a 2” by 6” piece of square tubing for front bumper.1/4” max wall thickness. Bumper ends must remain open. If you use square tubing for front bumper it cannot be 6” wider than frame rails. No added gussets allowed.NO home made pointy bumpers allowed.

Rear bumper:
- Must remain stock or be taken off.

*Safety:
- A 4 point cage is allowed; seat bar, door bars and dash bar. You may have a halo bar mounted off seat bar also. You may have a gas tank protector around fuel cell or gas tank. Gas tank protector can only be attached to seat bar. Gas tank protector can only be 24” wide max. and must have at least 1” gap between protector and rear sheet metal. You may have 1 or 2 pieces of chain vertical in windshield area for driver’s protection.

*Doors:

- Drivers door can be welded solid. All other doors can have 1 chain or 1- 3” by 6” steel plate per vertical seam. You may also have 1- chain or 1- 3” by 6” plate per vertical seam.

*Hoods:
- Must have a 12’’ hole cut in them in case of a fire. May be secured in 4 spots total. You may use 4 chains,4 bolts or 2 pieces of 1” all thread to secure hood. Only 2 places can be bolted or welded to frame.6” by 6” plates for hood max.

*Trunks:
- Trunks can be secured in 4 spots max.4 chains,4 plates,4 bolts ,or 2- 1” all thread thru trunk lid to frame, can be welded or bolted to frame.6” by 6” plate max for trunk lid plates. OR you may weld 2- 6” by 3” plates from trunk lid to ¼ panel.
Sedans may have 1 rear window bar. Sheet metal to sheet metal only...3" max size.(3" round,square tubing or strap steel)NO bigger than a 6" by 6" plate can be welded or bolted on ends of window bar.Must be welded or bolted in front of the front trunklid seam. Has to be attached to roof only, Cannot be attached to rollover bar.
*Suspension;
- You can weld shocks or struts to increase height. If your vehicle came with leaf springs for rear suspension , they must remain stock and in factory location.

*Tires:
- 30” max height. Any DOT tire, skid steer or forklift allowed. Doubled and tires with tire flaps (extra sidewall on outside of tire) allowed. You may use tubes, valve stem protectors. Remove all wheel weights before inspection.

*Rear end:
- Must remain 5-lug,no aftermarket axles,can be welded for posi.

All drivers must wear shirts,long pants,shoes,seat belts,helmet and eye protection.
If its not in the rules don't do it !!! OFFICIALS DECISSION is FINAL !!!


Any questions call; Jeremy or Vicky ph.330-307-5746


• All content and rules listed above is property of ‘’Obsession with DeStRuCtIoN’’ demolition derby specialist INC. Copy right 2017.


Pre entries can be sent to:
Jeremy Faust
310 Center ST.
Boscobel,WI.53805








“OBSESSION WITH DESTRUCTION” entry form
SEPTEMBER 30th,2017


Driver:_________________________________________________

Car Number:____________

Years driving in demolition derbys:_________

Address:________________________________________________

City/State/Zip:__________________________________________

Phone:___________________________________________________

Age:________

Year and make of vehicle:________________________________

Sponsors:________________________________________________

Old School full size car class: __________

Stock build compact/ midsize car heat: ____________

Street Stock Fullsize truck heat : ___________________

Built compact/midsize car heat : _______________

Compact truck /suv/ mini van heat : _____________


Driver Signature: __________________________________________

Send entry to:

Jeremy Faust
310 Center St.
Boscobel, WI. 53805

[hemi1]

Since a few have asked,yes you can pre register for all classes.This is not required but appreciated.Thanks for all the interest in this demolition derby again this year.Lets make 2017 the biggest turnout of entries and spectators we ever had in the last 7 years of being at the same location.

See ya all in September.

Jeremy and Vicky Faust

[cheater25x]

Is there a car limit on the old school class?

[hemi1]

Jun 30, 2017 13:02:50 GMT -5 cheater25x said:

Is there a car limit on the old school class?

Yep,all info for old school fullsize car/wagon class is on here in national big money promoter section.This class is almost full,so anybody interested in running in this class better act fast.There will be no entries accepted day of derby for this class.

[hemi1]

Getting several calls and pms about this demolition derby.Going to be another awesome event this year just like the past 6 years here.Please read our rules and make sure your built to our rules before you show up.Hoping for our biggest turnout of entries this year,with you the drivers this can happen.So start building and come down and have some fun Sept.30th,2017.

[bepper]

Compacts and midsize all run together or separate classes

[hemi1]

Aug 15, 2017 12:56:22 GMT -5 bepper said:

Compacts and midsize all run together or separate classes

They have always all ran together here for last 6 years. We do have two separate types of classes for compact/midsize tho = a stock build and a built class for them.

[bepper]

Ok

[hemi1]

From all the phone calls.pms,and pre entries we have gotten so far this should be a bigger and better show than ever before for the fans.Track is 25 feet longer than last year. We removed 6 large trees in pit area also to give more room for trucks and trailers.Remember Cold beer is only $3 a can or two for $5.No alchohaul will be allowed in pit area until show is over.

[hemi1]

Since a few have asked.YES we will have a salvage yard buyer on sight buying your unwanted car or truck if you decide not to take it home after derby.They pay cash for every vehicle and this saves you money hauling it home,then stripping it and hauling to salvage yard anyways.thanks for your cooperation.

[hemi1]

Anyone planning on attending the 7th annual Obsession with destruction demolition derby this Saturday,please get there early.Show starts at 2pm,registration closes at 12 (noon) and seating is limited...thanks