|
Post by fbwckoz on Mar 25, 2017 10:43:51 GMT -5
I love these trucks they hold up very well in limited weld trucks. I've ran this one 3 times so far and she's still pretty straight. They do start to belly out depending how your allowed to do your roll bar. My front end has not bent yet and im running a 5x5 3/8 inch price of square tubing. Would you happen to have any pics on how to mount a sbc in one of these? Started on my 99 half ton today and was kinda stumped as to how I'm going to mount one in there. Its a stock show so it has to stay simple. I cant go to overboard on any thing. Any tips or help would be amazing. This is my first try at putting a chevy engine in anything other than a chevy. i used 4x4 square tubing welded to the side of the frame on each side angle cut the square tubing at a 45, worked perfect just make sure you bolt the mounts good to the square tubing.
|
|
|
Post by tony22 on Jul 8, 2017 10:31:43 GMT -5
I love these trucks they hold up very well in limited weld trucks. I've ran this one 3 times so far and she's still pretty straight. They do start to belly out depending how your allowed to do your roll bar. My front end has not bent yet and im running a 5x5 3/8 inch price of square tubing. do you have pics on how you put the bumper on I had my dodge bend right in front of the gear box
|
|
|
Post by clueless on Jul 19, 2017 9:06:42 GMT -5
I love these trucks they hold up very well in limited weld trucks. I've ran this one 3 times so far and she's still pretty straight. They do start to belly out depending how your allowed to do your roll bar. My front end has not bent yet and im running a 5x5 3/8 inch price of square tubing. do you have pics on how you put the bumper on I had my dodge bend right in front of the gear box Mine did the same thing. Bent right at the first bent in the frame.
|
|