|
Post by haloneon on Aug 19, 2015 15:53:27 GMT -5
Any pics of a prebent Stratus? I have a 2000 with the 2.0 in it.
|
|
|
Post by hoosierwebb on Apr 5, 2016 12:34:03 GMT -5
I've got a 2004 Sebring with the 2.4L I was going to try and build it for mini mod and see how it does because I can get an identical car cheap. Now we have new rules for my local show this year and it's going to be full of RWD cars I think I'm going to try stock build. Just sucks cause I think this car is right on the verge of needing some building and it would be fairly stout.
|
|
|
Post by debydriver8s on Apr 6, 2016 11:51:54 GMT -5
I have an 01 for stock wirer show they look pretty tuff I'll b running the stock front bumper can't prebend or knotch or tuck the trunk
|
|
|
Post by debydriver8s on Apr 6, 2016 11:53:16 GMT -5
Do you have to run the air cleaner box on these cars. I took mine off along with some other parts and now it will no take the gas. My 01 runs just fine with no air box its the 4 banger idk if that makes a difference or not I keep the hose and air filter and just bent it and wired it straight up
|
|
|
Post by tunnelvisionracing on Apr 6, 2016 17:28:43 GMT -5
gonna want to run a rear window bar,they whale tail left stock
|
|
|
Post by debydriver8s on Apr 6, 2016 18:32:18 GMT -5
gonna want to run a rear window bar,they whale tail left stock Not allowed a rear window bar
|
|
|
Post by debydriver8s on Apr 14, 2016 23:42:08 GMT -5
Would it be better to run switches or just run off the key? Since its a pretty stock build I don't wanna mess with anymore wiring than I half to
|
|
|
Post by derbyfreak6187 on Apr 27, 2016 21:00:25 GMT -5
Will a dodge shadow 4 cylinder stack work on a dodge stratus 2.4 liter
|
|
|
Post by debydriver8s on Apr 29, 2016 11:11:02 GMT -5
Where is everyone moving the computer to
|
|
|
Post by hoosierwebb on May 10, 2016 7:01:22 GMT -5
I was able to move my computer and fuse box in cab on top of tunnel. If there is enough slack I'm going to fasten it to my dash bar.
|
|
|
Post by 24quad6s on May 11, 2016 2:43:32 GMT -5
make sure if 2000 or newer to not only relocate computer but also wires (2nd derby car i ran left it all stock) but main alternator/every other wire runs right threw driver side fender took one good hit and it chopped about 6 of the 15 wires in half
|
|
|
Post by hoosierwebb on May 11, 2016 9:40:07 GMT -5
I had to pull brake booster to get wires out from between fender and booster on my 2002 sebring but really not to bad once you cut out wiring you don't need.
|
|
|
Post by hoosierwebb on May 18, 2016 6:57:50 GMT -5
I built a set of headers on my 2.4L ran it about 5 min. I shut it off and started it about 3 times and it was fine tried to start it the next day and all it wants to so is crank over. Could the headers have anything to do with it?
|
|
|
Post by C4 on May 18, 2016 8:41:20 GMT -5
I built a set of headers on my 2.4L ran it about 5 min. I shut it off and started it about 3 times and it was fine tried to start it the next day and all it wants to so is crank over. Could the headers have anything to do with it? Did you put an o2 sensor back into your exhaust?
|
|
|
Post by derbyfreak6187 on May 19, 2016 19:08:38 GMT -5
Any advice on where I can put the computer so it not getting crushed when I get hit or something I can put over it so it don't break
|
|