|
Post by derbyman103 on Feb 20, 2015 17:00:15 GMT -5
The 80s Pontiac Phoenix bumpers arent too bad. I still have one that has 9 hard runs on it thats barely dented but its also loaded tho. Still a good bumper in stock form.
|
|
|
Post by C4 on Feb 20, 2015 17:41:05 GMT -5
For $200, you didn't get hurt a bit. On a side note, Guys that get stuck with a fwd uni body bumper rule need to spend the time to track down an early Citation bumper. is an 81 citation bumper any good, my dad has an x-11 with a blown 2.8. Yes. Not sure what year they switched to a junk bumper, but I know 81 is still the good one. Similar cars of the same vintage have similar bumpers...Phoenix, Skylark and Omega.
|
|
|
Post by taterjuice on Feb 20, 2015 18:07:56 GMT -5
Dam it. had a half dozen citations. Wished would've pulled the bumpers before the old man junked them.
|
|
|
Post by C4 on Feb 20, 2015 19:14:58 GMT -5
Happens. Should have kept the cars....better than an H body.
|
|
|
Post by taterjuice on Feb 20, 2015 22:29:12 GMT -5
Happens. Should have kept the cars....better than an H body. was before I started to demo. Still have the x-11 tho.
|
|
|
Post by derbydad45 on Apr 21, 2015 13:18:15 GMT -5
Do you have to run the air cleaner box on these cars. I took mine off along with some other parts and now it will no take the gas.
|
|
|
Post by tunnelvisionracing on Apr 22, 2015 2:35:49 GMT -5
|
|
|
Post by tunnelvisionracing on Apr 22, 2015 2:40:04 GMT -5
|
|
|
Post by C4 on Apr 22, 2015 7:55:16 GMT -5
Ok. Took the time to look it up in Hollander. Both of those sellers are wrong. 80-82 is a box. 83-85 is just a skin. Look close. Both of those are just skin.
|
|
|
Post by tunnelvisionracing on Apr 22, 2015 14:26:22 GMT -5
Ok. Took the time to look it up in Hollander. Both of those sellers are wrong. 80-82 is a box. 83-85 is just a skin. Look close. Both of those are just skin. yea,i thought they looked thin...i didnt wanna say you were wrong though.sorry i made you dig for info.
|
|
|
Post by C4 on Apr 22, 2015 15:01:01 GMT -5
No biggie. I have the book to cover American models from 75-85. Also have an 81 and an 85 out in the pasture. The 81 has the good one. The 85 just has a tin skin.
|
|
|
Post by brickm on May 17, 2015 22:00:28 GMT -5
Anyone know if you can weld a 98 posi?
|
|
|
Post by sparks11x on May 31, 2015 20:48:11 GMT -5
Anyone know if you can weld a 98 posi? I don't believe so but crawl underneath and look at the back of the trans if theirs is a cover that looks like a dif cover then you should be able to remove the cover and weld it, I had a caravan I did this too and boy could I push some stuff
|
|
|
Post by tunnelvisionracing on Jul 22, 2015 1:28:57 GMT -5
got a 98 stratus 2.4l dohc for a stock show....anybody have anything??the batter is in front of the drivers side tire and the oil filter is behind the passenger side tire.so avoid tire shots on pass. side is a must
|
|
|
Post by C4 on Jul 22, 2015 10:24:44 GMT -5
I would bet that oil filter could be relocated.
|
|