|
Post by C4 on Jul 4, 2015 13:22:13 GMT -5
Yep, all coil.
|
|
|
Post by taterjuice on Jul 6, 2015 12:20:42 GMT -5
I'm guessing you mean fairmonts? If so, no. Any of the cars covered on this thread are on the fox platform; so... no leafs. Dam autocorrect. Sorry bout that, appreciate it
|
|
brama
Future Icon
Posts: 4
|
Post by brama on Jul 6, 2015 21:04:03 GMT -5
Any one willing to share how many inches are taken off of the fronts on these monts
|
|
|
Post by C4 on Jul 6, 2015 22:34:11 GMT -5
4-5
|
|
brama
Future Icon
Posts: 4
|
Post by brama on Jul 7, 2015 21:06:03 GMT -5
|
|
brama
Future Icon
Posts: 4
|
Post by brama on Jul 7, 2015 21:07:07 GMT -5
First time building a mont so I may have a few more questions
|
|
brama
Future Icon
Posts: 4
|
Post by brama on Jul 18, 2015 13:21:53 GMT -5
Can any one point me in a direction as where to get and engine cradle for a 2.3??
|
|
|
Post by smashem23 on Aug 12, 2015 22:32:33 GMT -5
Yes I ran it once rear end still went down with pre bending and notchinf. Strapped it down on a frame straightener bent it back up alot so hopefully it will go up this time around running it one more time this year I'll put pictures up after that run most likely.
|
|
|
Post by taterjuice on Aug 18, 2015 9:50:39 GMT -5
Is there a reason everyone seems to be leaving the timing cover off the 2.3 ?
|
|
|
Post by taterjuice on Aug 19, 2015 10:18:28 GMT -5
Are rear sway bars common on fairmont's ?
|
|
|
Post by teammass22 on Sept 2, 2015 22:17:51 GMT -5
What happens to these front ends if you don't shorten the front?
|
|
|
Post by teammass22 on Sept 2, 2015 23:00:37 GMT -5
And what is the benefit of shortening
|
|
|
Post by taterjuice on Sept 2, 2015 23:17:13 GMT -5
And what is the benefit of shortening Any piece of metal is stronger the shorter it is. And gets rid of section of frame that runs downhill terribly. It'll plow and hook right bad. Judging from the stangs I've seen that weren't shortened
|
|
|
Post by C4 on Sept 3, 2015 0:22:55 GMT -5
I've got non shortened foxes figured out, but shorter is better.
|
|
|
Post by teammass22 on Sept 3, 2015 21:46:49 GMT -5
Thanks for the input c4 and tater,,, I want to shorten it but I'm afraid im going to mess it up,, never built anything uni body,, this is all a little bit new,,
|
|