|
Post by bigblocker17x on Feb 23, 2013 11:52:53 GMT -5
What chrome rims fit a stock crown vics? meaning stock front spindles and 8.8 rearend? thanks
|
|
|
Post by onlyone on Feb 23, 2013 13:20:47 GMT -5
Explorer and ranger
|
|
|
Post by jonesmotorsports on Feb 23, 2013 13:23:46 GMT -5
Jeep
|
|
|
Post by moto18 on Feb 23, 2013 20:11:38 GMT -5
x2 what they said ^
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Feb 23, 2013 20:15:01 GMT -5
Small bolt Dodge.
|
|
|
Post by derby111 on Feb 23, 2013 20:19:04 GMT -5
these won't work on the front though
|
|
|
Post by fordpower111 on Feb 23, 2013 20:49:53 GMT -5
The Mazda B3000 and B4000 wheels will work but, i don't think they are chrome.
|
|
|
Post by ajmayhem19 on Feb 24, 2013 17:45:37 GMT -5
We use 15" steel jeep wrangler wheels ,for the front we add 1/4" spacer and trim the lip of the upper A arm alittle . I don't know if they come in chrome tho.
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Feb 24, 2013 18:17:04 GMT -5
The Explorer rims are "chrome" I guess. The 10 spoke I have are just steel wheels with a chrome film.
|
|
ef187
Future Icon
Posts: 5
|
Post by ef187 on Feb 24, 2013 21:28:14 GMT -5
I saw some aluminum rims ran this year and looked like they held up good. Anyone else ran these before?
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Feb 24, 2013 21:34:32 GMT -5
fordpower111
Sent from my SCH-R760 using proboards
|
|
88x
Feature Winner
Posts: 1,125
|
Post by 88x on Feb 24, 2013 21:48:23 GMT -5
until the snap and not bend.
|
|
|
Post by fordpower111 on Feb 24, 2013 21:59:15 GMT -5
Everybody has their own opinion. But these have been ran since 2001 always on the front and never had a flat. Know they are on a 91 Vic. Always ran with front brakes too.
|
|
|
Post by fordpower111 on Feb 24, 2013 22:05:10 GMT -5
Also i still have my first set i ever ran. I'd run them on the back to if i was running a 8.8.
|
|
|
Post by bigblocker17x on Feb 25, 2013 21:09:48 GMT -5
I ran aluminum rims on the front but they were the late 70's early 80's wire spoke style which in the research and reading i did on here were said to be stronger than the late 80s style in the picture above but in the end they are still aluminum but i had great luck with mine until i ran figure 8 with the car and i hit the corners and mud got packed in the spokes and made the car push and handle worse in the corner in my oppinion but i ran steel wheels on the rear and i didnt break an axle through 1 hard derby and 4 figure 8s but i did however bend both axles to the point that the drums were binding and theres a half inch or more of space between the drum on one side and its pushed back a half inch on the other side but so be it, ill run an 8.8 again in a wire class i dont see the need to switch yet
|
|