|
Post by 008fury on Apr 7, 2012 19:01:29 GMT -5
going to use my first gm tranny this summer. there is a long cable im pretty sure its for the kickdown, i know with my mopar trannys i use to tie mine 3/4 open, how should i run my kickdown in this th350?
|
|
Black333
Heat Winner
I might suck at this more than you but, you never know
Posts: 430
|
Post by Black333 on Apr 8, 2012 12:00:55 GMT -5
thats just kickdown you dont need to do anything with it. you can just loop it around somewhere and tie it up good or take it out completely and plug the hole.
|
|
|
Post by 008fury on Apr 8, 2012 20:19:21 GMT -5
good deal, thanks black
|
|
|
Post by 46belowzero on Apr 9, 2012 20:09:48 GMT -5
bomber527 I can answer that question. yes you can run one with out one.... I would not advise it. I went through about 4 transmissions before I got my cooler. I bought one of scott gropps and all of my transmission issues went away. There are many other sellers on here that will do just as good of a job. Its money well spent. Buid your own all you need is an ammo can and i got a after market tranny cooler from the parts store but u can get a used one off of anything and put it in the can drill some holes for the lines and weld some angle on the side to mount to floor i prettied mine up i sprayed the inside of can with rubber under coating put a radiator drain cock on the can haha cock anyway and did rubber grommets where the lines come through then befor each heat you pack that full of ice all together 45ish bucks some of the ones you buy are twice that or more or go the cheap way and get an igloo cooler your choice size and put a coil of 3/8 copper tubing in it then just drill a couple holes through it straight through the floor and bolt it in all for like 15 bucks if you got a old cooler at the house
|
|
k37
Future Icon
Posts: 108
|
Post by k37 on Apr 11, 2012 0:06:14 GMT -5
Im in need of an extension housing for a th400. Wheres the best place to find one?
|
|
KoryJr7
Future Icon
Paro MotorSports " we dont Kiss ass we kick it"
Posts: 147
|
Post by KoryJr7 on Apr 11, 2012 7:58:44 GMT -5
Anyone Ever Run A Powerglide?
|
|
15w
Heat Winner
King D!ck
Posts: 276
|
Post by 15w on Apr 20, 2012 21:28:25 GMT -5
Anyone Ever Run A Powerglide? no, and i wouldnt if i was you they just cant handle the higher heat levels. just trade it to a racer for a th400 or th350.
|
|
jim10
Future Icon
Posts: 7
|
Post by jim10 on Apr 21, 2012 21:40:44 GMT -5
question i have a th 350 Reverse is strong but as soon as i put it in drive the drive shaft spins slow at like any idle but as soon as i give it gas it revs up but nothing am i missing a vac on it or just just junk
thanks
|
|
|
Post by bighoss40 on Apr 23, 2012 21:44:34 GMT -5
Anybody have a pic of Punishers Pipe dipstick ? Would like to see one before ordering it.
|
|
|
Post by KyleK2 on Apr 24, 2012 14:45:57 GMT -5
when just looping the trans lines, do you need to use the expensive high pressure hose, or can you just use fuel line? fuel line blows up you can buy hose for transmission pressure it's not that expensive. Just make sure to clamp it well.
|
|
|
Post by loudpedal18 on Apr 28, 2012 15:58:53 GMT -5
I have a TH350 and we realized today the converter is junk in it. The only spare converter I have came with a 700R4. Question is will this converter work with the 350 trans? Or is it a different size or something? Thanks.
|
|
gmcman
Heat Winner
Is there a methadone for derbying?
Posts: 290
|
Post by gmcman on Apr 29, 2012 7:14:10 GMT -5
Converters are transmission specific, th400 for a th400, 700r4 for a 700r4, etc.
|
|
gmcman
Heat Winner
Is there a methadone for derbying?
Posts: 290
|
Post by gmcman on Apr 29, 2012 7:15:11 GMT -5
What are guys doing with the vacuum modulators? Are you plugging it or hooking it up?
|
|
|
Post by moto18 on Jul 4, 2012 23:59:15 GMT -5
would like to know the same thing ^^^
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Jul 5, 2012 9:15:08 GMT -5
last year on my th400,i didn't hook the modulater up,an noticed it was taking off in second instead of first...then i decided to hook it to the intake vaccum...an it started pullin hard in first...don't know if the modulater had anything to do with it...jus statin wat i went thru
121
|
|