|
Post by moparpowered60 on Mar 25, 2014 11:22:26 GMT -5
Its not a rear im guna run. It just came under a car I bought. I just put a set of gears and spool in my 10 bolt c-clip. Will be ran in mostly stock type shows.
|
|
|
Post by studdog on Mar 26, 2014 13:05:31 GMT -5
Anybody know if I can bolt c clip 12 bolt 76 Chevy wagon brakes on a 73-76 caddy housing ends? Thanks
|
|
|
Post by steele911 on Mar 26, 2014 21:11:54 GMT -5
yes they will work
|
|
|
Post by amelung45x on Mar 31, 2014 20:17:35 GMT -5
I'm curious if anyone has installed any axles savers on their 10 bolt rear end. Are they a pain in the but to install? Reason why I ask is because I'm thinking about buying a set. Trying to get some pros and cons about them before iI buy
|
|
|
Post by hitman on Apr 1, 2014 11:42:33 GMT -5
I have a 1976 oldsmobile delta 88 royale I counted the bolts on the rearend there is ten it has bolt in axles are these good to run?
|
|
|
Post by studdog on Apr 1, 2014 12:18:50 GMT -5
I have a 1976 oldsmobile delta 88 royale I counted the bolts on the rearend there is ten it has bolt in axles are these good to run? The bolts to count are the carrier bolts or splines on the axle. But ya 10 bia(bolt in axle) are decent.
|
|
|
Post by cheezwhiz31 on Apr 7, 2014 10:26:43 GMT -5
Can i put the pinion from an old style gm (bolt on style) into a mid 70's skinny bolt in axle 10 bolt out of a monte(u joint style)? thanks
|
|
TRAVI 157
Heat Winner
because overkill is underrated
Posts: 623
|
Post by TRAVI 157 on Apr 8, 2014 10:39:36 GMT -5
I'm curious if anyone has installed any axles savers on their 10 bolt rear end. Are they a pain in the but to install? Reason why I ask is because I'm thinking about buying a set. Trying to get some pros and cons about them before iI buy for your first time they might take an hour. not very hard to do
|
|
|
Post by amelung45x on Apr 8, 2014 11:31:46 GMT -5
I'm curious if anyone has installed any axles savers on their 10 bolt rear end. Are they a pain in the but to install? Reason why I ask is because I'm thinking about buying a set. Trying to get some pros and cons about them before iI buy for your first time they might take an hour. not very hard to do thanks for the info
|
|
TRAVI 157
Heat Winner
because overkill is underrated
Posts: 623
|
Post by TRAVI 157 on Apr 8, 2014 17:48:02 GMT -5
no problem just let me know if you want to order a set
|
|
|
Post by Derbyu02 on Apr 9, 2014 12:17:07 GMT -5
I got a set of FTM axle savers. Not bad @ all to install. Take your time & do it right, as with everything.
Sent from my ADR6410LVW using proboards
|
|
|
Post by amelung45x on Apr 9, 2014 23:09:05 GMT -5
axle savers are on my list of things to buy this year lol. ive been getting a lot of good deals so far this year and my funds are getting low pretty quick lol.
|
|
ko30
Future Icon
Posts: 10
|
Post by ko30 on Apr 16, 2014 8:45:42 GMT -5
I have a 75 buick sedan and the crappy 10 bolt c clips, i was wondering what the best route to go for a stock derby they say we can swap chevy for chevy car rear ends.
|
|
|
Post by STROMI 121 on Apr 16, 2014 9:10:36 GMT -5
I would find a BIA 12 bolt out of a 71-76 GM to put under it. JMO
|
|
undertaker11
Heat Winner
get in, buckle up, and hold the hell on!!!!
Posts: 413
|
Post by undertaker11 on Apr 16, 2014 18:57:53 GMT -5
Can i put the pinion from an old style gm (bolt on style) into a mid 70's skinny bolt in axle 10 bolt out of a monte(u joint style)? thanks are you asking about the pinion in the rearend for the gears or the pinion flange that the driveshaft bolts to, if your asking about the pinion that goes inside with the gears yes it will change as i have taken gears out of a nova rearend and put into a impala rear and for the flange that the driveshaft interchanges also from small gm rear(monte) to big gm rear(impala).
|
|