|
97 ranger
May 22, 2022 16:04:11 GMT -5
via mobile
Post by hitman99x on May 22, 2022 16:04:11 GMT -5
I've got a question about a 97 ranger 2.3 manual.
It turns over but not start. I've replaced coils amd no spark. I checked the terminals that go into them and they are getting power in the middle.
I've checked for power to the computer relay but there is no power. Can confirm as I looked into it and the computer will turn on the pump for 2 seconds after turning ignition on, I don't hear the pump turn on.
Any ideas would be greatly appreciated!
|
|
improse
Feature Winner
Posts: 1,203
|
Post by improse on May 25, 2022 0:25:43 GMT -5
Hot wire the pump to a toggle switch. can also tap into the pump wires and hook straight to battery just to test if good still.
|
|