|
Post by moto18 on Apr 15, 2022 16:13:33 GMT -5
The class im building for this year is allowing full floater rear ends.. its a semi stock type of build so nothing to crazy.. My question is i dont have a floater to use and really dont want to buy one so heres my options.. Which would you use.. 1- stock 8.8 2- 10 bolt bia 3- 9 inch thats what i have to use.. thanks for any info
|
|
owen11x
Feature Winner
Ford makes it, Chevy shakes it, Mopar breaks it!
Posts: 2,585
|
Post by owen11x on Apr 15, 2022 16:47:31 GMT -5
10 bolt then 9 inch then 8.8
|
|
Landshark007
Feature Winner
I'm not here to win I'm here to make sure you don't win
Posts: 4,228
|
Post by Landshark007 on Apr 16, 2022 16:22:42 GMT -5
Not enough info. 9” is it out of a truck. If so it will be 60” wide is that gonna fit or stick out. And gotta be 31 spline. And what’s the 10 bolt out of is it a good one. What gears do they have. The 8.8 I’ve never hard anything good about so I’d scrap it
|
|
Landshark007
Feature Winner
I'm not here to win I'm here to make sure you don't win
Posts: 4,228
|
Post by Landshark007 on Apr 16, 2022 16:27:08 GMT -5
Where are you from I have a floater I’ll sell you cheap never derbyed 100** $
|
|