|
Post by cheezwhiz31 on Jul 6, 2021 13:45:27 GMT -5
Have a pre-ran 1990 wagon rear end is 90 up and humps are good. starting to dump in front of passenger hump a little has an very nice 4 point cage with roll bar placed well. 2 down bars on it to fix it plate 4x4. Bent behind the flap on both sides was not tilted and a little bubble at back of spring pocket. Has a not stuffed but couple small plates on 74 impala front bumper. has 80s ford front on rear(straight) 80's arms welded down. Front end it nosed up 6-8 inches but easily pulled back down. If guy puts a GTP in the back rear will do good with some sheet metal trimming. spindles suspension steering all there. Either i will strip my stuff out of it neatly or i'm going to cut front rails off and just start taking stuff out of it and scrap it onced stripped doesn't matter to me. Has a 10 bolt 28 spline bolt in with 3 spare axles and rear tires go with Buick rallies with skids on them. 1000$ for car,bumpers,cage,rear end, 2 tires,suspension parts... Going to be stripped by this weekend and cut up by next weekend and scrapped...
|
|
|
Post by cheezwhiz31 on Jul 6, 2021 19:50:48 GMT -5
Sold
|
|