|
Post by settleit on Jun 11, 2021 21:46:19 GMT -5
Ive been looking for an aftermarket radiator for the stock hose setup for a 4.6 and running into some outlet trouble since all the Ford rads I'm finding are reversed. The placement for the sbc upper/lower inlets are correct, but the lower inlet is a bit too large.
Stock vic radiator hoses are both 1.5" upper and lower right? Was going to see if the 26" speedway sbc radiator would work but the outlet says 1.75" and wanted to make sure I wasn't wasting money. Any suggestions, or anyone know a rad that fits?
|
|
|
Post by smashford on Jun 12, 2021 2:12:25 GMT -5
They make sleeves for hoses or just find a hose that necks down
|
|
|
Post by settleit on Jun 12, 2021 14:15:47 GMT -5
They make sleeves for hoses or just find a hose that necks down Got it, thanks
|
|