14
Future Icon
Posts: 74
|
Plate
May 31, 2021 18:22:08 GMT -5
via mobile
Post by 14 on May 31, 2021 18:22:08 GMT -5
Hey guys, so I was going to a show that got canceled. The problem with this is that I was allowed to pre plate my car . The car is going to a different show now and pre plating is not allowed. What would be the best way of removing plates from the frame ? Never done it yet
|
|
|
Plate
May 31, 2021 19:30:00 GMT -5
via mobile
Post by smashford on May 31, 2021 19:30:00 GMT -5
Plasma gouge the welds and chisel off....grinder or torch works too
|
|
demoboy333
Feature Winner
Enter your message here...
Posts: 3,124
|
Post by demoboy333 on May 31, 2021 20:43:53 GMT -5
see if promoter will just let you put cuts in plate. If not cut just plate off an wash off some of the welds.
|
|
14
Future Icon
Posts: 74
|
Plate
May 31, 2021 22:04:48 GMT -5
via mobile
Post by 14 on May 31, 2021 22:04:48 GMT -5
Plasma gouge the welds and chisel off....grinder or torch works too what do you mean by gouging them? I have a plasma but I’m just worried about the frame behind it
|
|
|
Plate
May 31, 2021 23:47:59 GMT -5
Post by C4 on May 31, 2021 23:47:59 GMT -5
Definitely contact promoter to come up with an acceptable solution that won't screw you too badly.
|
|
|
Plate
Jun 1, 2021 13:29:33 GMT -5
via mobile
Post by smashford on Jun 1, 2021 13:29:33 GMT -5
|
|
|
Plate
Jun 3, 2021 21:13:40 GMT -5
via mobile
Post by ADDICTEDtoIMPACT on Jun 3, 2021 21:13:40 GMT -5
Air arc
|
|