|
Post by builtnotbought on Feb 17, 2021 2:01:25 GMT -5
I put my sbc 350 motor in the shop and I’m getting .30 bored over 10:1 compression and I’m going flat top pistons what cam should I use ? What am I forgetting ? I’m also gonna u se 062 vortec heads gonna get them redone and Freshened up what am I missing forgetting ?!!
|
|
|
Post by cheezwhiz31 on Feb 17, 2021 9:50:55 GMT -5
I'd use dish pistons with the 062 heads. Small chamber heads i'd say dish. Large chamber heads flat. I think 062 are 63cc if i remember right.
I'd stay in a RV cam area maybe a step up or 2... What gears you running behind it and auto or stick??
|
|
|
Post by builtnotbought on Feb 17, 2021 12:25:03 GMT -5
I’m using a melling cam, hyperetic coated flat top pistons
|
|
owen11x
Feature Winner
Ford makes it, Chevy shakes it, Mopar breaks it!
Posts: 2,585
|
Post by owen11x on Feb 17, 2021 14:12:52 GMT -5
Stuff the comp 268 extreme energy cam in it
|
|
demoboy333
Feature Winner
Enter your message here...
Posts: 3,124
|
Post by demoboy333 on Feb 17, 2021 15:36:37 GMT -5
Stuff the comp 268 extreme energy cam in it Baldwin will tell him that cam also if he calls on building a stocker engine through them. Just everyone seems to them you need this wild ass cam that lopes hard.
|
|
owen11x
Feature Winner
Ford makes it, Chevy shakes it, Mopar breaks it!
Posts: 2,585
|
Post by owen11x on Feb 17, 2021 18:00:07 GMT -5
I'm all for a lopey cam but if you dont have the pistons or heads to move the air that cam wants to move it is doing more harm than good for sure it all has to work together to be effective
|
|
|
Post by builtnotbought on Feb 18, 2021 21:10:32 GMT -5
God any vids of the cam running would love to hear how this cam sounds
|
|
|
Post by CHUNKY MONKEY 13 on Mar 26, 2021 2:33:15 GMT -5
I went with summit heads, 72cc Chambers 2.02/1.6 valves,comp xe274 cam, Edelbrock intake and a 670 truck avenger. All that bolted to a stock 100k mile shortblock🤘🤘🤘
|
|
|
Post by builtnotbought on Mar 27, 2021 14:56:47 GMT -5
I got some camel jump heads 202 gonna get them done up so hopefully they can run good with my block
|
|
|
Post by rennyx on Apr 4, 2023 16:54:01 GMT -5
I just picked up a 350. It is 30 over. Flat tops. It has the 186 camel hump heads with the small valves and chambers. Holly street dominator intake(300-28z). I am going to port the and bowl blend the heads my self. Suggestions on cam? Intake or use the Holly? Carb?
|
|
|
Post by bluecrew72 on Apr 24, 2023 10:44:32 GMT -5
|
|
|
Post by builtnotbought on Jun 4, 2023 4:58:28 GMT -5
I went with 602 vortec heads breathes nice
|
|