|
Post by ferris821 on Aug 5, 2020 11:28:16 GMT -5
I have the ski inc mounts with the bushings in them the drivers side fits nicely no gaps no nothing. The passenger side is a different story there’s a lil hump where the mount lays and it’s giving me a heck of a gap. Just curious what the best ways to deal with this is or if anyone’s ran into it before. Thanks.
|
|
|
Post by smashford on Aug 5, 2020 14:38:24 GMT -5
What car
|
|
|
Post by ferris821 on Aug 5, 2020 14:58:52 GMT -5
96 grand marquis for a limited weld show sorry should’ve threw that in there
|
|
|
Post by smashford on Aug 5, 2020 21:36:57 GMT -5
I assume you got the vic ones? A picture speaks a thousand words. What's interfering so you can't weld? Smash part down with a hammer?
|
|
|
Post by cheezwhiz31 on Aug 7, 2020 16:03:22 GMT -5
I don't think ski makes the contour vic mounts. i could be wrong but i order some a while ago and they didn't come with the contour for the one side. Also if you have thicker then 1/2 cradle it throws them out of wack too. Cut a slit in the hump that is giving you trouble and beat it down and re weld it shut.
|
|
|
Post by Jeffrey7x on Aug 10, 2020 11:31:05 GMT -5
Make three cuts on the hump like an H and beat flat and weld her up. Tada. Now you can use any chevy mount.
|
|