Post by radyn1 on Jan 7, 2020 21:11:05 GMT -5
2020 EFFINGHAM COUNTY FAIR
2020 MODIFIED RULES
1ST $ 1800
2ND $ 1000
3RD $ 700
4TH $ 400
5TH $ 300
6TH $ 200
7TH—12TH $ 100
IF ANYONE WOULD LIKE TO RUN OR SEE A TRUCK CLASS AT THE FAIR CONTACT JON BECKER TO SEE IF WE CAN MAKE IT HAPPEN
PLEASE READ THESE RULES THROUGHLY AND COMPLETELY
2020 IS A NO EXCUSE AND NO EXCEPTION YEAR!!!
ALL JUDGES DECISIONS ARE FINAL
please read carefully. If car does not pass inspection or driver is unwilling to change car to pass inspection, absolutely no refunds!!! All rules will be followed or you will not run! If it does not say it in the rules – don’t just assume you can do it. CALL FIRST!!!!
WE HAVE THE RIGHT TO REFUSE ANY ENTRY AND SPECTATOR ADMITTANCE.
1. Pit gate opens at 2:00 pm DERBY starts at 6:30 pm
2. We have two men dedicated to selling pit passes at the gate plus we will have 2 ladies to help with registrations. We have forms and waivers we will need filled out. Pit gate will open at 2 pm if you think that is sufficient. Registration table is closed at 5:30. After that the driver will need to come to the fair office to enter and pay a $20 late fee. Inspections will be on the track at the north end before they enter the pit. Pit passes are $20 and car registration is an additional $20. We do not have riders. Classes will be Modified, Semi Stock 1980 & newer, Compact, and Ladies Only Compact.
NO REFUNDS WILL BE MADE DUE TO FAILURE TO MEET REGULATIONS!
Be prepared to run heats…..
GENERAL RULES:
3. Top five in feature must actively compete at end, no driving yourself on barriers or dirt berms. Failure to comply could result in complete restart with all feature qualifiers actively competing again or disqualification.
4. No reinforcements allowed other than specified in these rules. Any metal added to reinforce the car is illegal. You will only be allowed 2 trips thru the inspection line.
5. NO PAINTING, UNDERCOATING, OILING OR GREASING OF FRAMES. YOU WILL NOT BE INSPECTED. THIS INCLUDES PAINTING OF THE FRAME FLAT BLACK.
6. NO HITTING IN DRIVERS DOOR, but no using driver door as a shield. If the hit is deemed by the official to be careless or intentional, you will be disqualified. If you use your driver’s door as a defense, we will not enforce the rules. If you use the door as a defense repeatedly you will be disqualified. This will be at the judges’ discretion.
7. NO hot-rodding in the pits! Keep it at an idle.
8. Any open door or second fire will cause disqualification. If in a heat, you may fix it and come back in the consolation. In the feature, you will be disqualified.
9. You must make AGGRESSIVE contact every 60 seconds.
10. Sandbagging is not tolerated and will be strictly enforced. Locking up the brakes prior to a hit for anything other than a driver’s door will be cause for disqualification. The fans pay to see a show, put one on for them!
11. IF YOU THINK SOMEONE IS SANDBAGGING, HIT THEIR CAR WITH YOUR CAR ON THE TRACK.
12. Winning cars plus three out of the money must remain on track until released by officials, or will not be paid prize money. Cars are subject to re-inspection before any prize money is handed out. Cars found illegal will be stripped of all prize money for that event.
13. Any questions or controversies will be discussed at the drivers meeting
14. YOU MUST HAVE AT LEAST A 12” X 12” ROOF SIGN WITH YOUR CAR NUMBER ON IT.
15. All drivers must pick up trophies and earnings at the completion of the event, or forfeit. They will not be available after that date.
16. All persons MUST sign entry form, insurance waiver, release form, pay entry fees, and purchase pit pass before entering pit area.
17. THERE IS NO ALCOHOL IN THE PITS. This includes pit crews. If you or ANY of your crew is caught with alcohol, you will be disqualified.
18. No harassing of the judges will be allowed at any time by drivers, passengers, crewmembers or spectators. Failure to abide by this rule, the driver will forfeit all money and all involved will be escorted from premises.
19. Registration forms will be filled out the day of the event. All drivers must be at least 16 years of age; drivers 16 and 17 must have a parent or legal guardian sign a minor release form
20. All drivers must wear approved helmets, eye protection either safety glasses or visor on helmet, long pants, and shirt. Also all drivers and riders must wear working seat belts. This will be enforced in 2020 or you will not run!!!!
21. - Drivers must remain in the vehicle with helmet, seatbelt and eye protection on until notified by an official that it is safe to exit the vehicle.
22. A driver that receives a black flag for an intentional door hit will be disqualified from all competition for that night. A driver that receives a black flag for sandbagging or 1 fire in the interior of the car will be disqualified. 2 fires on the exterior will be disqualified, if in heat you may go to consolation. This will be at the judges’ discretion.
23. This is not a team event; team driving will not be tolerated
24. All drivers must attend drivers’ meeting prior to derby
25. All cars must be removed from derby site by 12:00 noon the following day unless otherwise stated at drivers meeting. Failure to do this will result in cars being removed by and becoming property of Fair Board.
26. DO NOT READ ANYTHING INTO THESE RULES, JUST READ THE RULES!! If it doesn't say you can, YOU CAN'T!
27. DO NOT paint anywhere on suspension or frame; if we can tell it’s been painted, we will not even inspect your car.
28. ALL SUNROOFS MUST BE COVERED WITH A THIN SHEET OF METAL, I.E. WELED OR BOLTED (WITH BOLT HEAD INSIDE THE CAR) OR RIVETED. NO # 9 wire or chain to accomplish this will be allowed.
2020 MODIFIED RULES
1. Passenger cars or station wagons only. No trucks, jeeps, hearses, or limousines. NO CHRYSLER IMPERIALS 73 & OLDER AND NO IMPERIAL SUB-FRAMES. NO 61 – 69 LINCOLNS. Cars previously run in Demolition Derby may install new front clip. Any clip may be used on any car, MUST be installed in stock manner. Officials MUST approve installation.
2. All glass, side windows, rear windows, headlights and taillights, must be removed before reaching racetrack. Rolling down windows is not permitted.
3. Rear seat of sedan must be removed, top and bottom. On station wagons all seats and decking must be removed. Station wagons must be emptied to floorboards. All cars must be swept clean, both drivers compartment and trunk. No spare tires, broken glass, or trash, etc., allowed in cars.
4. Cars must have a seatbelt and working brakes. MANDATORY!!
5. You can carry a fire extinguisher, but it must be mounted securely and free of movement
6. Battery may be moved, but must be securely fastened and covered in passenger compartment. MAXIMUM OF TWO AUTOMOBILE TYPE BATTERIES ALLOWED.
7. Any type automotive radiator may be used but must be mounted in stock position. NO RESERVE TANKS. Electric fan may be used.
8. Fenders may be bolted together with 3/8 inch bolts or smaller with 3/8 inch or smaller washers only. A maximum of 10 bolts per fender.
9. All doors may be welded (Outside of body only), chained or wired. Straps should not be larger than ¼” thick or 4 inches wide on door shell (vertical) and 2 inches wide on window frame. You may beat top of doors down and weld them. No extra metal added.
10. No doubling of body panels allowed, no added metal allowed.
11. Patching floorboards, if you have to patch rusty floorboards you must cut out all the rust, overlap no more than 1” with same thickness as body material and sheet metal screws – no more than one every 4”. No Welding to floorboards or firewall.
12. You may crease and fold body panels but do not weld. No extra metal may be added.
13. NO OTHER BODY WELDS OTHER THAN WHAT IS LISTED ABOVE.
14. All sunroofs must be covered with a thin sheet of metal, I.E. welded, bolted (with bolt head inside the car) or riveted.
HOODS, TRUNKS AND BODY BOLTS
MUST BE OPEN AT INSPECTION! So don’t come to inspection line with hood bolted down….
1. , HOODs Hoods must have two (2) holes, at least four (4) inches in diameter on each side of carburetor – Not directly on top of carburetor. IF HOOD IS REMOVED, EITHER FAN BLADE MUST BE REMOVED OR FAN BELT MUST BE CUT.
2. On all cars, hoods, trunks, and tailgates may be secured with the following method: on front of car, HOOD: two pieces of 1 inch all thread, NO SLEEVING ENTIRE ALL THREAD JUST BETWEEN CORE SUPPORT AND FRAME, YOU CAN WELD IT, with a washer no larger than six (6) inches O.D. and 3/8 inch thick, all threads MUST be mounted outboard of the radiator. In addition to all threads, six (6) 1 inch O.D. bolts with a washer no larger than six (6) inches O.D. and 3/8 inch thick, or you may use angle iron back to back with a bolt through it. Angle iron cannot be more than 3/16 thick or longer than 6 inches. Three on each side of car, a total of six. Total of 6 bolts and 2 up front all threads holding the hood down and any amount of wire or cable. All wire, or cable MUST be mounted outboard of radiator. A maximum of 50 bolts 3/8 inch or smaller are allowed to bolt together hood seams.
TRUNK, 4 pieces of 5/8 inch all thread, with a washer no larger than six (6) inches O.D. and 3/8 inch thick, all threads may be mounted through deck lid and frame anywhere in trunk, can be welded to the frame or in body mount holes. In addition to all threads, you may weld trunk 5” SKIP 5” (MEANS NO METAL) 5 off, Straps not be larger than ¼” thick or 2 inches wide or six (6) 1 inch O.D. bolts with a washer no larger than six (6) inches O.D. and 3/8 inch thick, and any amount of wire or cable. If trunk is welded must have a 12” hole in trunk lid. On station wagons two pieces of 1 inch all thread, with a washer no larger than six (6) inches O.D. and 3/8 inch thick, all threads may be used in the rear through roof and stock body mount replacing existing bolt.
TAILGATE 5 on 5 off, you may weld 5” SKIP 5” (MEANS NO METAL) 5 off, Straps not be larger than ¼” thick or 2 inches wide or six (6) 1-inches O.D. bolts with a washer no larger than six (6) inches O.D. and 3/8 inch thick, and any amount of wire or cable. YOU CAN WELD WASHERS (no bigger than 5/8 washer and must be at least 12” apart) TO THE BODY TO RUN WIRE THROUGH.
3. You may have rear window bar 2”X2”X1/4” MAX. IN SIZE, 6” max. on roof 4”X4”X1/4” FLAT PLATE TO ATTACH TO THIS BAR TOP AND BOTTOM and must be centered on front side drip rail on trunk no further back or forward (2” on each side). Weld to the strapping on your trunk. There must be 6” minimum distance (gap) from the top of this bar on the roof and halo bar…. This is the only location allowed for this bar.
\4. All other may be replaced with 1 inch O.D. bolts with a washer no larger than six (6) inches O.D. and 3/8 inch thick. YOU CAN REMOVE BODY BUSHING AND SET BODY ON THE FRAME. Body mount bolts inside passenger compartment that are close together may have one washer six (6) inches x twelve (12) inches, must have two (2) or more body mount bolts through washer. You may add two (2) additional body mount bolts per side inside passenger compartment. All all-threads MUST have nut on top and bottom or you can weld the bottom of the all thread to the frame. Vertical part of the frame only.
5. A minimum of one chain or wire running from the outside (top) of roof down to the cowl or BAR DOWN TO DASH BAR OF CAGE on the front window is MANDATORY for safety. Maximum of two. IF USING METAL STRAPS MAX. SIZE 2” WIDE X ¼” THICK, 12” ID APART. CAN GO TO FRONT DASH BAR OR COWL THEN TO TOP LIP AREA OF WINDSHIELD ONLY.
CAGE AND HALO BARS
1. All driver and passenger doors may be reinforced. You should have a six (6)-point cage, cross bars may be ran as follows, one across dash, one behind front seats, and one in rear seat area. You can run four (4) down tubes, two (2) per side. No further forward then the inner front door seam, Lower door bars are allowed between down tubes must be 6 inches or more above top of frame. NOTHING OUT OF DRIVERS’ COMPARTMENT. You can have steel plate between cage and front doors. Must be securely fastened to cage. Front bar must be mounted no more than 2” below the bottom of the front window seal and be no more than 4” in diameter. Must have 6” between front bar and center of firewall on a fresh car. Front bar cannot be attached to firewall at any time. ALL DOWN TUBES MUST BE BEHIND DASH BAR, STRAIGHT UP AND DOWN AND ON FLAT PART OF FRAME. CAN NOT GO TO BODY MOUNT BOXES. NO KICKERS TO REAR HUMPS. NOTHING OUT OF REAR DRIVERS COMPARTMENT. Without a DP you can have a bar (kicker) is allowed 2”x2”x1/4” SQUARE stock from your dash bar to 2” behind A arm (NOT UP AGAINST ARM OR WELED TO IT) MAX. SIZE 2”x2”x1/4” O.D. THIS SIZE WILL BE STRICTLY ENFORCED OR YOU WILL NOT RUN. If you have a DP on your motor you’re not allowed this bar/kicker. You cannot weld anything to front bar protruding toward the distributor protector. No grater blades, metal plates or tubing on exterior of body (driver & passenger doors).
2. 3RD bar must stay inside of interior of rear drivers compartment. Nothing can be added to the top or bottom of this bar.
3. Halo bar are allowed. Can be attached to door bar. Could be run to the frame but it would be counted as one of your down tubes. Nothing attached to halo bar.
4. This is not mandatory but we encourage everyone to put a steel plate between cage and front driver and passenger doors. Thickness of metal is up to driver. Must be securely attached to cage, must be 2” off of floor, this is for protection not reinforcement.
5. DP can’t touch dash bar during or at the end of the derby or you will be disqualified
FRAME
1. Top frame seams from front of A-arms forward may have single bead of weld added. Must be single pass no wider than 3/8” wide by 3/8” high, no extra metal may be added. DO NOT REWELD ENGINE CROSS MEMBER SEAMS OR ANYTHING THAT ATTACHES TO IT OR SUB –FRAME AND ANY OTHER BRACKETS ATTACHED TO FRAME. NO CONCRETE!!! DO NOT WELD FACTORY HOLES UP; ALL FACTORY HOLES MUST BE OPEN FOR INSPECTION OF FRAME.
A. CAN’T REWELD TORSION BARS TO CRADLE
2. FULL SIZE MOD. CARS ONLY may pitch frame in front. ON THE OUTSIDE OF FRAME ONLY YOU CAN ONLY REWELD THE WELDS THAT YOU HAVE TO CUT TO PITCH THE FRONT. MUST BE SINGLE PASS NO WIDER THAN 3/8” WIDE BY 3/8” HIGH DO NOT REWELD ALL OF THE WELDS ON THE BOXES. NO ADDED METAL. NO EXTRA BRACING OR GUSSETS. DO NOT CUT AND REWELD ON TOP OR BOTTOM.
3. FULL SIZE MOD. CARS ONLY may have hump plates. Hump plates can be no longer than 22" long: 11" each way from the center of the hump; 1/4" or less thickness and contour to frame width and hump; on the outside of the frame only, and must contour to the shape of the frame and have a 3/8” inspection hole drilled through plate and frame for inspection. If you do a leaf spring conversation from coils you’re not allowed the hump plates.
A. If your car came with factory leaf springs, NO hump plates
4. You cannot alter frame in any way other than specified in rules. Do not crease or reshape frame.
5. You cannot add or replace engine cross members. 03 and up must use factory engine cross member (cradle)
6. If you use FACTORY UPPER TRAY ORIGINAL MUST BE LEFT IN, non-watts tray must be 1” or more from frame rails. It can be bolted or welded. No welds, gussets, or bracing to frame rails. If you use factory lower brackets they must be mounted in factory position. They may be welded with welds no more than the FACTORY WELDS would be. DO NOT OVER WELD!!! If you use aftermarket or homemade upper or lower brackets they may be bolted only! NO WELDING AFTERMARKET OR HOMEMADE BRACKETS TO FRAME!!!
7. You may run one (1) wire or chain from frame rail to frame rail underneath back of car behind rear end.
8. You may put a bolt with a stamped flat washer thru frame to hold it together. Only one (1) per wheel opening must be loose during inspection. DO NOT weld washer. (Pinning of frame)
9. You may notch the frame for minimal pre-bending, but do NOT weld the cut.
10. Buick, Olds or Pontiacs YOU MAY fill the large hole in the frame behind the radiator support.
11. If changing front stub, you can overlap 2 ½”, able to weld both sides, but no adding extra metal. MUST BE FROM SAME MAKE AND MODEL.
12. If restubbing one side of the frame, you are allowed to cut and fit the new frame flush and weld one pass all the way around (butt – fit – weld).
13. All trailer hitches MUST be totally removed.
14. If running a used car prior to this derby, you are allowed 8 patch plates outside of the frame only. No plate larger than 4”x4”x1/4”, and must be painted a fluorescent color. So it is easily noticed for the inspectors. AFTER INSPECTION OR HEATS NO WELDING THESE PLATES ON. IF ADDITIONAL PLATES ARE FOUND AFTER INSPECTION – NO MONEY WILL PAID OUT
15. 4 plates on fresh cars to fix/patch rust holes outside the frame only, unless it’s a preran/used car then follow patch plate rule.
BUMPERS
NO BUMPER MOUNTING/BRACKETS PAST FACTORY LOCATION
1. Any OEM shock canister may be bolted or welded to any car. AMOUNTS OF BOLTS OR WELDS MAY NOT EXCEED TYPICAL STOCK INSTALLATION. Homemade bumper brackets are permitted, NO GUSSETS OR BRACING. NOT TO EXTEND BEHIND OEM MOUNTING BOLT LOCATION ON FRAME. May use 2½” max. Round or square tubing. No thicker than ¼ inch. No solid stock may be used. Any OEM stock automobile bumper may be bolted or welded to the shock canister or bumper brackets. You may use two (2) pieces of light chain per shock. Fenders and bumper ends may be trimmed to allow for wheel clearance.
2. Front bumper may be reinforced inside or outside and end to end. You may weld outer chrome of bumper to inner skin of bumper. Nothing else can be welded to outer chrome. You cannot alter angle of bumper. Anything coming out of bumper during race will be cause for disqualification. 11” of point and must contour from frame to frame and must be stock appearing on pointy bumpers.
3. You may have 6" long 4" wide 1/4" thick bumper support bracket, butt fit against bumper or 2" onto bumper. If you’re running a preran and choice to put your extra. 4 by 4 1/4" plate up front there must be at least a 1/8" gap between the 2 plates. Any questions please call.
SUSPENSION
1. Stiffness of suspension will be left up to the discretion of the driver.no aftermarket spindles allowed. Suspension parts must be OEM. A-arms may be bolted or lightly welded with strap no more than ¼” thick and 2” wide, MUST RUN STRAIGHT UP AND DOWN. One in front and one behind A-arm for a total of 2 per A-arm. Can be to upper or lower A-arm, but not both. Can only be welded 2” on A-arm and 2” on frame. Only a 2”X2” area on each end of strap may be welded to A-arm and frame. DO NOT WELD ENTIRE A-ARM TO THE FRAME! NO OTHER METAL ADDED!
2. Homemade or aftermarket tie rods (NO HEIMS) and homemade steering shaft are permitted.
ENGINE AND TRANSMISSION
1. ANY ENGINE OR TRANSMISSION MAY BE USED IN ANY CAR, BUT MUST BE MOUNTED IN A STOCK POSITION. ON A V-BLOCK MOTOR, FRONT SPARK PLUGS MUST BE EVEN OR IN FRONT OF UPPER BALL JOINT; ON IN-LINE MOTORS, NUMBER TWO (2) SPARK PLUG MUST BE EVEN OR IN FRONT OF UPPER BALL JOINT.
2. Chained, welded, or homemade motor mounts will be permitted, but must meet approval of officials.
3. Any type of header is allowed, but must be directed away from driver compartment.
4. Transmission oil coolers and engines oil coolers are permitted. All tranny lines must be wrapped or run through PVC. Inspection personnel must approve all mountings, lines, and fittings.
5. Skid plates are allowed. Must be separate oil/transmission plates. No full-length skid plates. No bolting or welding to frame.
6. Distributor protectors are allowed. Cannot be any wider than 12” and must not protrude more than 2” from transmission mounting surface on back of engine block. Must be attached to engine or transmission mounting bolts.
7. You may beat flat the engine side of the firewall only, do not weld or bolt firewall. Do not re-enforce the firewall/cowl. Do not beat, paint, bolt, weld on, weld to or modify the driver’s side of the firewall/cowl in any way.
8. Transmission protectors are allowed. MUST HAVE 2” BETWEEN PROTECTOR AND CROSS MEMBER ON A FRESH CAR. PROTECTOR CAN NOT BE WELDED OR BOLTED SOLID TO CROSS MEMBER. MUST FLOAT OVER CROSS MEMBER.
9. IF ORIGINAL CROSS MEMBER IS REPLACED, YOU MAY USE OEM OR 2” ANGLE IRON OR 2” CHANNEL MAX OR 2”X 2”X ¼” O.D. NOTHING thicker than ¼ inch. Thick. This will be strictly enforced or you will not run.
GAS TANKS
1. Stock gas tank MUST be removed. A METAL BOAT TANK OR HOMEMADE METAL TANK must be mounted in rear seat area and bolted down with metal straps. NO PLASTIC TANKS!!!Other types of installations will not be allowed. NO GAS CANS with hoses duct taped. A Marine (boat) tank or an official approved homemade tank is mandatory. All tanks MUST be covered with a rubber cover. All tanks MUST have secure cap. All lines and fittings MUST be leak proof and meet approval of Officials. Electric fuel pumps are permitted but MUST have shut-off within reach of driver. NO MORE THAN ten (10) GALLONS OF GAS IN TANK.
REAR END
1. Any automobile rear end can be used in any car. TRUCK OR FLOATER REAR ENDS can be used in any car. You can transform a coil spring to leaf spring or vice versa. Only on the following models: 80 and newer Ford, 79 and newer Chrysler and 77 and newer GM. On models originally equipped with leaf springs, stock leaf springs and hangers MUST be used. Leaf packs on all cars may have no more than 8 leaves per pack Must be OEM stock. Homemade spring perches or homemade trailing arm brackets may be welded to rear end. Rear end spider gears may be welded solid. You may tilt rear end by shortening or lengthening rear end control arms. Trailing arms may be reinforced. Rear end housing may be reinforced. No dually wheels allowed.
Any drive shaft or U joint may be used. Welding of drive shaft is permitted. Pinion brake ok
No extra metal added. Any bracket that shows reinforcement to the frame will not be allowed. JUDGES HAVE FINAL DECISION.
You may have five (5) spring clamps per spring. You pick if you want them in front of or behind axle, or split them between the front and back.
TIRES
1. Only sixteen (16) inch or smaller tires and wheels will be allowed. NO SPLIT RIMS ALLOWED. All wheels and rims must be strictly stock, valve stem protectors are allowed. You can have 10" STANDARD aftermarket wheel centers ONLY….. NO WHOLE CENTERS
2. Valve stem protectors, liquid in tires permitted or screws in rims to hold tires in place permitted.
3. Forklift and skid loader tires are allowed
ALL JUDGES DECISIONS ARE FINAL
Any questions contact: Randy Schwartzkopf at 618-218-0203 call or text or at swartzpromotionsllc@gmail.com or on Facebook on Swartz Promotions Page and on wecrash.com under Midwest section
MINI-CAR RULES 2020 EFFINGHAM COUNTY ONLY
ALSO FOR LADIES ONLY MINIS/COMPACTS
SATURDAY AUG. 8TH AT 6:30 PM
PAYOUT:
1 ST $ 700
2 ND $ 400
3 RD $ 300
4 TH $ 200
5 TH $ 100
LADIES PAYOUT:
1st $400
2nd $200
3rd $100
FRONT WHEEL DRIVE MINIS ONLY
ALL JUDGES DECISIONS ARE FINAL!!!
Please read carefully. If car does not pass inspection or driver is unwilling to change car to pass
inspection, absolutely no refunds!!! All rules will be followed or you will not run! If it does not
say it in the rules – don’t just assume you can do it. CALL FIRST!!!!
THE ANY COUNTY FAIR HAS THE RIGHT TO REFUSE ANY ENTRY AND SPECTATOR
ADMITTANCE.
1. Pit gate opens at 2 pm DERBY starts at 6:30 pm
2. PLEASE READ THESE THROUGHLY AND COMPLETELY. 2020 IS A NO EXCUSE AND
NO EXCEPTION YEAR!!
NO REFUNDS WILL BE MADE DUE TO FAILURE TO MEET REGULATIONS!
GENERAL RULES
3. Top five in feature must actively compete at end, no driving yourself on barriers or dirt berms.
Failure to comply could result in complete restart with all feature qualifiers actively competing
again, or disqualification.
4. No reinforcements allowed other than specified in these rules. Any metal added to reinforce
the car is illegal. You will only be allowed 2 trips thru the inspection line.
5. NO PAINTING, UNDERCOATING, OILING OR GREASING OF FRAMES. YOU WILL
NOT BE INSPECTED. THIS INCLUDES PAINTING OF THE FRAME FLAT BLACK.
6. NO HITTING IN DRIVERS DOOR, but no using driver door as a shield. If the hit is deemed
by the official to be careless or intentional, you will be disqualified. If you use your driver’s door
as a defense, we will not enforce the rules. If you use the door as a defense repeatedly you will
be disqualified. This will be at the judges’ discretion.
7. NO hot-rodding in the pits! Keep it at an idle.
8. Any open door or second fire will cause disqualification. If in a heat, you may fix it and come
back in the consolation. In the feature, you will be disqualified.
9. You must make AGGRESSIVE contact every 60 seconds.
10. Sandbagging is not tolerated and will be strictly enforced. Locking up the brakes prior to a
hit for anything other than a driver’s door will be cause for disqualification. The fans pay to see a show, put one on for them!
11. IF YOU THINK SOMEONE IS SANDBAGGING, HIT THEIR CAR WITH YOUR CAR
ON THE TRACK.
12. Winning cars plus three out of the money must remain on track until released by officials, or
will not be paid prize money. Cars are subject to re-inspection before any prize money is handed
out. Cars found illegal will be stripped of all prize money for that event.
13. Any questions or controversies will be discussed at the drivers meeting
14. YOU MUST HAVE AT LEAST A 12” X 12” ROOF SIGN WITH YOUR CAR NUMBER
ON IT.
15. All drivers must pick up trophies and earnings at the completion of the event, or forfeit. They
will not be available after that date.
16. All persons MUST sign entry form, insurance waiver, release form, pay entry fees, and
purchase pit pass before entering pit area.
17. THERE IS NO ALCOHOL IN THE PITS. This includes pit crews. If you or ANY of your
crew is caught with alcohol; you will be disqualified.
18. No harassing of the judges will be allowed at any time by drivers, passengers, crewmembers
or spectators. Failure to abide by this rule, the driver will forfeit all money and all involved will
be escorted from premises.
19. Registration forms will be filled out the day of the event. All drivers must be at least 16 years of age; drivers 16 and 17 must have a parent or legal guardian sign a minor release form
20. All drivers must wear approved helmets, eye protection either safety glasses or visor on
helmet, long pants, and shirt. Also, all drivers and riders must wear working seat belts. This will
be enforced in 2020 or you will not run!!!!
21. - Drivers must remain in the vehicle with helmet, seatbelt and eye protection on until
notified by an official that it is safe to exit the vehicle.
22. A driver that receives a black flag for an intentional door hit will be disqualified from all
competition for that night. A driver that receives a black flag for sandbagging or 1 fire in the
interior of the car will be disqualified. 2 fires on the exterior will be disqualified, if in heat you
may go to consolation. This will be at the judges’ discretion.
23. This is not a team event; team driving will not be tolerated
24. All drivers must attend drivers’ meeting prior to derby
25. All cars must be removed from derby site by 12:00 noon the following day unless otherwise
stated at drivers meeting. Failure to do this will result in cars being removed by and becoming
property of Fair Board.
26. DO NOT READ ANYTHING INTO THESE RULES, JUST READ THE RULES!! Don’t read any into it.
27. DO NOT paint anywhere on suspension or frame; if we can tell it’s been painted, we will
not even inspect your car.
28.. ALL SUNROOFS MUST BE COVERED WITH A THIN SHEET OF METAL, I.E.
WELED OR BOLTED (WITH BOLT HEAD INSIDE THE CAR) OR RIVETED. NO # 9
wire or chain to accomplish this will be allowed. wire or chain to accomplish this will be
allowed.
2019 MINI-CAR RULES
EFFINGHAM COUNTY ONLY
FRONT WHEEL DRIVE MINIS ONLY
1. Must be powered by four- or six-cylinder engine
2. Wheelbase must be 108 inches or less. NO EXCEPTIONS!
A. NO moving/bending a stock or aftermarket component to shorten wheel base.
3. No four-wheel drive vehicles.
4. MANDATORY! All four/six-cylinder cars must have a cage. Four point minimum.
5. Stock gas tank MUST be removed. A METAL BOAT TANK OR HOMEMADE METAL
TANK must be mounted in rear seat area and bolted down with metal straps. NO PLASTIC
TANKS!!!
A. Battery and gas tank must be tight when coming through inspection line or you wont
be inspected.
6. All lines under car must be steel lines or if running rubber lines, they must be inside of the car.
7. If OEM bumper had no bolts bumper homemade bumper brackets may go six (6) inches from
back side of bumper.
8. No pipe over struts.
9. No kickers
10. No aftermarket or homemade extreme cradle/pullet protector
ALL JUDGES DECISIONS ARE FINAL
1. Cars previously run in Demolition Derby may install new front clip. Any clip may be used on
any car, MUST be installed in stock manner. Officials MUST approve installation.
2. All glass, side windows, rear windows, headlights and taillights, must be removed before
reaching racetrack. Rolling down windows is not permitted. Remove all glass mirrors and
plastic. Remove all decking in wagons. Vehicles must be swept clean of all debris
3. Rear seat of sedan must be removed, top and bottom. On station wagons all seats and decking must be removed. Station wagons must be emptied to floorboards. All cars must be swept clean, both drivers compartment and trunk. No spare tires, broken glass, or trash, etc., allowed in cars.
4. Cars must have a seatbelt and working brakes. MANDATORY!!
5. You can carry a fire extinguisher, but it must be mounted securely and free of movement.
6. Battery may be moved, but must be securely fastened and covered in passenger compartment.
MAXIMUM OF TWO AUTOMOBILE TYPE BATTERIES ALLOWED.
7. Any type automotive radiator may be used but must be mounted in stock position. NO
RESERVE TANKS. A radiator cradle is allowed made of 1/8” metal 1” wider than the radiator.
Bolted only to car and nothing in front of the radiator. AFTERMARKET OR HOME MADE
RADIATOR CRADLE.
A. Front rad. screen max. Thickest 3/8” thick, bolted or 4 1” welds.
8. Fenders may be bolted together with 3/8-inch bolts or smaller with 3/8 inch or smaller washers
only. A maximum of 10 bolts per fender.
9. All doors may be welded (Outside of body only), chained or wired. Straps cannot be larger
than ¼” thick and 4 inches wide on door shell (vertical) and 2 inches wide on window frame.
You may beat top of doors down and may tack them in three places with a maximum of 1” weld
each.
10. No doubling of body panels allowed; no added metal allowed.
11. Patching floorboards, if you have to patch rusty floorboards you must cut out all the rust,
overlap no more than 1” with same thickness as body material and sheet metal screws – no more
than one every 4”. No Welding to floorboards or firewall.
12. You may crease/enhance sheet metal body panels but do not fold and weld. No extra metal
may be added.
13. NO OTHER BODY WELDS OTHER THAN WHAT IS LISTED ABOVE. THIS
INCLUDES BODY SEAMS ANYWHERE ON THE CAR.
14. ALL SUNROOFS MUST BE COVERED WITH A THIN SHEET OF METAL, I.E.
WELED OR BOLTED (WITH BOLT HEAD INSIDE THE CAR) OR RIVETED. No #9
wire or chain to accomplish this will be allowed.
HOODS AND TRUNKS
MUST BE OPEN AT INSPECTION! So, don’t come to inspection line with hood bolted down….
1. HOODS: must have two (2) holes, at least four (4) inches in diameter on each side of
carburetor – Not directly on top of carburetor. IF HOOD IS REMOVED, EITHER FAN BLADE
MUST BE REMOVED OR FAN BELT MUST BE CUT.
2. NO SECOND ALL THREAD WELDED TO SIDE OF THE FRAME AND RAN
THROUGH THE AT MID POINT OF THE HOOD.
3. On all cars, hoods, trunks, and tailgates may be secured with the following method: on front of car, two pieces of 1 inch all thread, NO SLEEVING, can have a 4” or less spacer free floating
or welded between core support and frame, with a washer no larger than six (6) inches O.D. and 3/8-inch-thick, all threads MUST be mounted outboard of the radiator. In addition to all threads, six (6) 1-inch O.D. bolts with a washer no larger than six (6) inches O.D. and 3/8-inch-thick, or you may use angle iron back to back with a bolt through it. Angle iron cannot be more than 3/16 thick or longer than 6 inches. Three on each side of car, a total of six. Total of 6 bolts and 2 up front all threads holding the hood down and any amount of wire or cable. All wire, or cable MUST be mounted outboard of radiator. A maximum of 20 bolts 3/8 inch or smaller are allowed to bolt together hood seams.
TRUNK 4 pieces of 5/8 inch all thread, with a washer no larger than six (6) inches O.D. and 3/8
inch thick, all threads may be mounted through deck lid and frame anywhere in trunk, can be
welded to the frame or in body mount holes. In addition to all threads, you may weld trunk 5 on
5 off, Straps should not be larger than ¼” thick or 4 inches wide or six (6) 1-inch O.D. bolts with
a washer no larger than six (6) inches O.D. and 3/8-inch-thick, or 10 3/8” bolts in the drip rail,
not both one or the other and any amount of wire or cable. If trunk is welded must have a 12”
hole in trunk lid. On station wagons two pieces of 1 inch all thread, with a washer no larger than
six (6) inches O.D. and 3/8-inch-thick, all threads may be used in the rear through roof and stock
body mount replacing existing bolt.
TAILGATE weld 5 on 5 off, Straps should not be larger than ¼” thick or 4 inches wide or six
(6) 1-inches O.D. bolts with a washer no larger than six (6) inches O.D. and 3/8 inch thick, and
any amount of wire or cable. YOU CAN WELD WASHERS (no bigger than 5/8 washer and
must be at least 12” apart) TO THE BODY TO RUN WIRE THROUGH.
A. No carburetor protector outside the intake area or DP.
B. You may have rear window bar 2”X2”X1/4” MAX. IN SIZE, 6” max. on roof
4”X4”X1/4” FLAT PLATE TO ATTACH TO THIS BAR TOP AND BOTTOM and must
be centered on front side drip rail on trunk no further back or forward (2” on each side).
Weld to the strapping on your trunk. There must be 6” minimum distance (gap) from the
top of this bar on the roof and halo bar…. This is the only location allowed for this bar.
BODY MOUNTS
1. All body mount bolts may be replaced with 1/2-inch O.D. bolts with a stamped washer. Do not take them out and place body on frame. If replaced, a gap of 1” minimum is mandatory between body and frame. You may replace with a stack of washers, or one piece of anything solid, as long as it is about the same diameter as the factory bushing. Do NOT crush factory body bushings. Body mount bolts inside passenger compartment that are close together may have one washer six (6) inches x twelve (12) inches, must have two (2) or more body mount bolts through washer. You may add two (2) additional body mount bolts per side inside passenger compartment. All all-threads MUST have nut on top and bottom and NO welds.
1. A minimum of one chain or wire running from the outside (top) of roof down to the cowl or
BAR DOWN TO DASH BAR OF CAGE on the front window is MANDATORY for safety.
Maximum of two. IF YOU HAVE A PASSENGER MUST HAVE
2. IF USING METAL STRAPS MAX. SIZE 2” WIDE X ¼” THICK, 12” ID APART. CAN GO TO FRONT DASH BAR OR COWL THEN TO TOP LIP AREA OF WINDSHIELD ONLY.
CAGE AND HALO BARS
1. All driver and passenger doors may be reinforced. You should have a six (6)-point cage,
MININMUM OF A 4PT. CAGE. cross bars may be ran as follows, one across dash, one behind
front seats, and one in rear seat area, 3 rd bar must stay inside of interior of rear drivers
compartment, nothing past front of package tray. Nothing can be added to the bottom of this bar.
2. You can run four (4) down tubes, two (2) per side. 2 of these down tubes must mounted
mandatory in the following way on each side, 1 down tube must be to flat part of the frame no
further forward then the inner front door seam, with a max distance of 2’ from the same
measuring point. Lower door bars are allowed between down tubes must be 6 inches or more
above top of frame. NOTHING OUT OF DRIVERS’ COMPARTMENT. You can have steel
plate between cage and front doors. Must be securely fastened to cage. Front bar must be
mounted no more than 2” below the bottom of the front window seal and be no more than 4” in diameter. Must have 6” between front bar and center of firewall on a fresh car. Front bar cannot be attached to firewall at any time. ALL DOWN TUBES MUST BE BEHIND DASH BAR,
STRAIGHT UP AND DOWN AND ON FLAT PART OF FRAME. CAN NOT GO TO BODY
MOUNT BOXES. NO KICKERS TO REAR HUMPS. NOTHING OUT OF REAR DRIVERS
COMPARTMENT. You cannot weld anything to front bar protruding toward the distributor
protector. No grater blades, metal plates or tubing on exterior of body (driver & passenger
doors). DP can’t touch dash bar during or at the end of the derby or you will be disqualified.
3. Halo bars are allowed. Can be attached to bar behind your seat or could be run to the frame but it would be counted as one of your down tubes. There must be 6” minimum distance (gap) from halo bar and the top of your rear window bar…. Nothing can be attached to halo bar
4. This is not mandatory but we encourage everyone to put a steel plate between cage and front driver and passenger doors. Thickness of metal is up to driver. Must be securely attached to cage, must be 2” off of floor, this is for protection not reinforcement.
FRAME
1. DO NOT REWELD ENGINE CROSS MEMBER SEAMS OR ANY OTHER BRACKETS
ATTACHED TO FRAME OR SHEET METAL under hood or trunk. NO CONCRETE!!! DO
NOT WELD FACTORY HOLES UP; ALL FACTORY HOLES MUST BE OPEN FOR
INSPECTION OF FRAME.
2. You cannot alter frame in any way other than specified in rules. Do not crease or reshape
frame.
3. You may run one (1) wire or chain from frame rail to frame rail underneath back of car behind back tires/wheels.
4. You may put a bolt with a stamped flat washer thru frame to hold it together. Only one (1) per wheel opening must be loose during inspection. DO NOT weld washer. (Pinning of frame)
5. You may notch the frame for minimal pre-bending, but do NOT weld the cut.
6. If changing front stub, cut 3 inches behind second cross member bolt hole. When replacing,
can overlap 2 ½”, able to weld both sides, but no adding extra metal. Must be of the same
make and model.
7. If restubbing one side of the frame, you are allowed to cut and fit the new frame flush and
weld one pass all the way around (butt – fit – weld). Must be of the same make and model.
8. All trailer hitches MUST be totally removed.
9.2020 THIS INCLUDES MINI’S: If running a used car prior to this derby, you are allowed 4
patch plates max. Size 4”x4”x1/4”. Must be painted a bright color. So, it is easily noticed for the
inspectors. AFTER INSPECTION OR HEATS NO WELDING THESE PLATES ON. IF
ADDITIONAL PLATES ARE FOUND AFTER INSPECTION – NO MONEY WILL PAID
OUT
10. Attachment of lower front sub frame to body, can use only chain 3/8” or smaller, can weld
the links at each end for attachment points. But on a used/preran car you can use a metal strap,
but each one counts toward/as your patch plates
11. No plates on fresh cars to fix/patch rust holes, unless it’s a preran/used car then follow patch plate rule.
BUMPERS
1. Any OEM shock canister may be bolted or welded to any car. AMOUNTS OF BOLTS OR
WELDS MAY NOT EXCEED TYPICAL STOCK INSTALLATION. Homemade bumper
brackets are permitted, NO GUSSETS OR BRACING. NOT TO EXTEND BEHIND OEM
MOUNTING BOLT LOCATION ON FRAME. May use 2½” max. Round or square tubing. No
thicker than ¼ inch. No solid stock may be used. This can only extend into the frame a max.
of 8”. Will be drilled at 8 ¼” measured from the front edge of the frame on every car. Any
OEM stock automobile bumper may be bolted or welded to the shock canister or bumper
brackets. You may use two (2) pieces of light chain per shock. Fenders and bumper ends may be
trimmed to allow for wheel clearance.
2. Front bumper may be reinforced inside or behind and end to end. Must have chrome on the
outer part of the bumper from any OEM bumper shaped to fit. You may weld outer chrome of
bumper to inner skin of bumper. Nothing else can be welded to outer chrome. You cannot alter
angle of bumper. Anything coming out of bumper during race will be cause for disqualification.
11” of point and must contour from frame to frame and must be stock appearing on pointy
bumpers. (the curve of point must start at each frame)
3. You may have 6” long 4” wide x 1/4 thick bumper support bracket, butt fit against bumper or onto bumper. If you’re running a preran and choice to put your extra. 4 by 4 1/4; plate up front there must be at least a 1/8” gap between the 2 plates. Any questions please call.
SUSPENSION
1. Stiffness of suspension will be left up to the discretion of the driver. NO OTHER METAL
ADDED!
2. Homemade tie rods and homemade steering shaft are permitted.
3. No pipe over struts
4. No front bumper straps to core support or all thread
ENGINE AND TRANSMISSION
1. ANY ENGINE OR TRANSMISSION MAY BE USED IN ANY FRONT WHEEL DRIVE
CAR, BUT MUST BE MOUNTED IN A STOCK POSITION 4 or 6 CYLINDER ONLY
2. Chained, welded, or homemade motor mounts will be permitted, but must meet approval of
officials.
3. At motor mount to sub-frame your allowed 2 per side of motor mount a 2”x3”x1/4” plate on
its side welded to frame and engine cradle
4. Any type of header is allowed, but must be directed away from driver compartment.
5. Transmission oil coolers and engines oil coolers are permitted. Inspection personnel must
approve all mountings, lines, and fittings.
6. Skid plates are allowed. Must be separate oil/transmission plates. No full-length skid plates.
No bolting or welding to frame.
7. Distributor protectors are allowed. Cannot be any wider than 12” and must not protrude more than 2” from transmission mounting surface on back of engine block. Must be attached to engine or transmission mounting bolts.
8. No aftermarket or homemade extreme cradle/pullet protector
9. No carburetor protector outside the intake area or DP. *No aftermarket or homemade
attachments to rad. Core support or fire wall. Nothing outside of the normal/factory type
attachment points.
10. You may beat flat the engine side of the firewall only, do not weld or bolt firewall. Do not re-enforce the firewall/cowl. Do not beat, paint, bolt, weld on, weld to or modify the driver’s side of the firewall/cowl in any way.
11. Transmission protectors are allowed. MUST FLOAT OVER CROSSMEMBER
12. Must have stock/OEM cross member
GAS TANKS
1. Stock gas tank MUST be removed. A METAL BOAT TANK OR HOMEMADE METAL
TANK must be mounted in rear seat area and bolted down with metal straps. Other types of
installations will not be allowed. NO GAS CANS with hoses duct taped. A Marine (boat) tank or
an official approved homemade tank is mandatory. All tanks MUST be covered with a rubber
cover. All tanks MUST have secure cap. All lines and fittings MUST be leak proof and meet
approval of Officials. Electric fuel pumps are permitted but MUST have shut-off within reach of
driver. NO MORE THAN ten (10) GALLONS OF GAS IN TANK.
2. NO PLASTIC TANKS, unless in a wooden box 1” thick minimum or a metal box ¼”
minimum. All sides except top side. This also goes for if your using a metal boat tank.
3. Mounted in center of the back-side area.
FOR THE MINI-CAR DERBY CLASS, YOU WILL NO LONGER BE ABLE TO MOVE THE STOCK GAS
TANK INTO THE BACK-SEAT AREA. For mini autocross only you can leave factory tank under
the car.
REAR END
1. Factory rear end, REMEMBER FRONT WHEEL DRIVE ONLY. You may tilt rear end by
shortening or lengthening rear end control arms. Trailing arms may be reinforced.
2. Any drive shaft or U joint may be used. Welding of drive shaft is permitted.
3. No extra metal added. Any bracket that shows reinforcement to the frame will not be allowed.
JUDGES HAVE FINAL DECISION.
TIRES
1. Only sixteen (16) inch or smaller tires and wheels will be allowed. NO SPLIT RIMS
ALLOWED.
2. Valve stem protectors, liquid in tires permitted or screws in rims to hold tires in place
permitted.
ALL JUDGES DECISIONS ARE FINAL
Any questions contact: Randy Schwartzkopf at 618-218-0203 call or text or at
Swartzpromotionsllc@gmail.com
SEMI- STOCK 80 and NEWER 2020 Rules
EFFINGHAM COUNTY FAIR
PAYOUT:
1ST $ 1500
2ND $ 700
3RD $ 300
4TH $ 200
5TH $ 100
PLEASE READ THESE RULES THROUGHLY AND COMPLETELY
2020 IS A NO EXCUSE AND NO EXCEPTION YEAR!!!
ALL JUDGES DECISIONS ARE FINAL !!!
Please read carefully. If car does not pass inspection or driver is unwilling to change car to pass inspection, absolutely no refunds!!! All rules will be followed or you will not run! If it does not say it in the rules – don’t just assume you can do it. CALL FIRST!!!!
THE ANY COUNTY FAIR HAS THE RIGHT TO REFUSE ANY ENTRY AND SPECTATOR ADMITTANCE.
1. Pit gate opens at 2:00 pm DERBY starts at 6:30 pm
SEMI- STOCK 80 and NEWER 2020 Rules
1. 1980 and newer, No Imperials, no Suicide Lincolns, no hearses
2. Cars must have seatbelts and working brakes “MANDATORY”
Body
1. Remove all glass mirrors and plastic. Remove all decking in wagons
Vehicles must be swept clean of all debris
2. No sedagons, ZERO sheet metal folding or frame shaping. Creasing sheet metal enhancements is allowed, but rear quarters and taillight lance area attachment points must remain vertical/straight up and in factory position. You can change front clip must be of the same make and model.
3. Deck and Hood must be 100% in stock location and open for inspection or able to see into with a 12” cut out (you may cut up to 50% of the trunk/deck lid off or remove completely) or a single 90 degree bend. Must stay on factory hinges
4. Anything can be removed, NOTHING can be added
5. FASTEN DOWN HOODS, TRUNKS AND TAIL GATES (4 each) in 1 of the following 3 ways, NO mix and match!!! First way: 4 places with ½” bolts sheet metal to sheet metal, Second way: (4) 3” long angle iron ¼” thick max. Back to back, with 1- ½” bolt per angle iron. Third way: #9 wire double stranded max. Also you may replace front 2 body mounts with two 1" threaded rod, you may replace 2 of the 4 rear body mounts in the trunk area with two 1" threaded rod (front 2 or rear2) must be installed to replace factory mounts. 3 inch diameter washers ¼” thick max. Bottom nut and washer may be on bottom side of the frame, not to extend 1” past nut and may extend through hood and truck. ZERO welding allowed mounting any of these threaded rods.
6. Can have a 4” or less spacer free floating between core support and frame
7. Hoods must have two (2) holes, at least four (4) inches in diameter on each side of carburetor not directly on top of carburetor.
8. IF HOOD IS REMOVED, EITHER FAN BLADE MUST BE REMOVED OR FAN BELT MUST BE CUT.
9. A maximum of 20 bolts 3/8 inch or smaller are allowed to bolt together hood seams.
10. Driver doors vertical seams maybe welded solid, all other doors may be welded 6 inches ON AND 6 OFF per vertical door seam only. 4” x 1/8” strap. Do not weld hood or trunk!
BODY MOUNTS
1. Body mounts and spacers to remain stock and in place. If they are broken or rusted out, may be replaced with a 1/2” max. size bolt mounted up in frame in stock position with rubber grommet in place, with a 2”x 2”x1/8” washer top and bottom side of bolt. If body mounts are changed/replaced you must cut away the factory sheet metal for inspection.
2. A minimum of one chain or wire running from the outside (top) of roof down to the cowl or BAR DOWN TO DASH BAR OF CAGE on the front window is MANDATORY for safety. Maximum of two. IF USING METAL STRAPS MAX. SIZE 2” WIDE X ¼” THICK, 12” ID APART. CAN GO TO FRONT DASH BAR OR COWL THEN TO TOP LIP AREA OF WINDSHIELD ONLY. REAR WINDOW BARS ARE NOT ALLOWED!
3. Allowed “10”- 3/8” bolts per wheel opening, with 3/8” max. size washer
FRAMES
1. NO welding on frames allowed. (Except where stated in the rules)
2. NO cutting flap to tilt, cold bend ok
3. If running a used car prior to this derby, you are allowed 4 patch plates max (must be on the outside of the frame). Size 4”x4”x1/4”. Must be painted a bright color. So it is easily noticed for the inspectors. AFTER INSPECTION OR HEATS NO WELDING THESE PLATES ON. IF ADDITIONAL PLATES ARE FOUND AFTER INSPECTION – NO MONEY WILL PAID OUT
4. No plates on fresh cars to fix/patch rust holes, unless it’s a preran/used car then follow patch plate rule.
5. You can shorten the frame, but must have 3” of frame sticking out in front of the front body mount factory location (this mount is where your front all thread would go) cannot move front body mount i.e. ford, mercury and Lincoln. CAN NOT MOVE CORE SUPPORT. Also on the old iron GM’s you cut the piece off to square up the front frame if you choose to hard nose these cars.
SUSPENSION
1. Modifications allowed. Ride height and bounce/suspension give will be left up to the driver as long as it meets the min. and max. ride height requirements. Must remain strictly OEM stock. ZERO aftermarket parts, except where noted.
2. May reinforce factory tie rod or use aftermarket tie rods, but must have factory style tie rod ends. NO HEIMS.
3.. A-arms may be bolted or lightly welded with strap no more than ¼” thick and 2” wide, MUST RUN STRAIGHT UP AND DOWN. One in front and one behind A-arm for a total of 2 per A-arm. Can be to upper or lower A-arm, but not both. Can only be welded 2” on A-arm and 2” on frame. Only a 2”X2” area on each end of strap may be welded to A-arm and frame. DO NOT WELD ENTIRE A-ARM TO THE FRAME! NO OTHER METAL ADDED!
Strictly enforced.
4. Bumpers (front and rear) can be no higher than 26” from the ground to the top of the bumper or lower than 16” from the ground to the bottom of the bumper
5. You may use spring spacers store bought or homemade as long as it meets height requirements of the bumpers
6. You may have a double strand of #9 wire or 5/16’ chain to hold coil spring to rearend and leaf sprung cars may use 4 single strands of #9 wire as leaf clamps or factory clamps. No exceptions
7. From frame to frame behind rear end you may have up to 4 strands of #9 wire twisted together or one 3/8” chain or smaller.
DRIVE TRAIN
1. ANY drivetrain allowed with the following criteria.
2. ANY ENGINE OR TRANSMISSION MAY BE USED IN ANY CAR, BUT MUST BE MOUNTED IN A STOCK POSITION. ON A V-BLOCK MOTOR, FRONT SPARK PLUGS MUST BE EVEN OR IN FRONT OF UPPER BALL JOINT; ON IN-LINE MOTORS, NUMBER TWO (2) SPARK PLUG MUST BE EVEN OR IN FRONT OF UPPER BALL JOINT.
3. You may use factory or aftermarket motor mounts. Only the lower motor mounts may be welded to engine cradle only. You may use two 1/2" thick spacers to raise engine to clear steering components, may not exceed rubber mount area.
4. No tranny protectors/braces, stock mounting only, stock cross members only, you may use a 2”x 2”x 1/4” angel iron 4” long welded only to inside frame rail to mount your stock cross member I.E. CHEVY DRIVE LINE IN A FORD. No other welding
5. You may weld rearend gears / spools ok. Pinion brake ok
REAR END
1. REARENDS WILL STAY THE AS 2018, YOU CAN WELD STOCK OEM BRACKETS TO ANY 5 LUG REAREND, Reared swaps allowed no bracing, and no re-enforcement. Max axle size 31 spline, Ford, GM or Mopar Clarification: All must be factory axles(cast flanges) and rear ends, must be a direct bolt-in, NO fabricating or welding allowed of axles or reared(inside or outside)
2. All money winners will be subject to pull axles before payout at official’s discretion
A. Watts link or box ford package tray can be weld in, but no more than it would have come from the factory. For lower control arm must use the factory bracket welded to side of the frame in the factory location and with factory weld amount for 98-02’s
3. On models originally equipped with leaf springs, stock leaf springs and hangers MUST be used.
4. Leaf packs on all cars MUST be OEM stock.
5. Slider drive shaft is permitted.
6. You may have five (5) spring clamps per spring.
7. No reinforced trailing arms, stock only, you may tilt rear ends. You may shorten or lengthen trailing arms. You may overlap 4" and weld, no added metal. DO NOT WELD ON FRAMES.
8. You cannot transform a leaf spring car to coils or vice versa.
9. You can weld on rear-ends, such as spring perches, trailing arm brackets, and spider gears. 10. You may put one loop of small chain over the stock cross member and around rear end one each side. Cannot go inside car floor.
11. You may also put one light chain or #9 4 strands twisted together across, between rear frame rails behind rear end.
12. You may run chain from rear end to frame, nothing thru body. 5/16” max. Size chain.
13. Aftermarket shifters, headers, gas and brake pedals allowed, Clarification: none may strengthen car.
14. If you have a DP on your motor and wish not to take it off you must cut dash out 4” wider on each side of DP. THIS WILL BE STRICTLY ENFORCED, SO BE SURE TO CUT ENOUGH OUT.
9. Engine cradles allowed (front plate, DP and lower cradle)
10. DP and or DASH CAN NOT TOUCH DASH BAR AT ANY POINT DURING OR AFTER THE DERBY.
11. Pulley protectors are allowed, but sway bar may be removed or not able to touch before or after the race/derby!!!!
12. Any driveshaft and U joint is allowed, may be cut and welded to length.
13. No homemade/aftermarket radiator cradles for 2019, secure radiator with other mines.
CAGE AND HALO BAR:
1. 6 point square cage only, 1 down tube MANDTORY per side to flat part of the frame, no further forward then the inner front door seam, with a max distance of 2’ from the same measuring point. 6 inch max diameter. 3RD bar must stay inside of interior of rear driver’s compartment, IN FRONT OF PACKAGE TRAY AREA.
2. Halo bar allowed, only to the back seat bar (in line with center bar ...No further back), not to floor. Nothing can be attached to Halo Bar.
3. Also inside drivers compartment you’re allowed 2 spots/places of #9 wire to the frame, 4 strands twisted together.
4. Drivers door must be padded.
5. Gas tank and battery must be moved, secured and covered. Tank behind the seat, Battery centered in the passenger front floor.
6. NO PLASTIC TANKS, unless in a wooden box 1” thick minimum or a metal box ¼” minimum. All sides except top side. This also goes for if your using a metal boat tank.
7. Mounted in center of the back side area.
A. Battery and gas tank must be tight when coming through inspection line or you wont be inspected.
8. Nothing may be mounted in a way that strengthens the car.
9. Trans and engine coolers allowed. Must be mounted in rear seat area and meet the approval of the officials.
10. May add knuckles to factory OEM columns or run an aftermarket column
BUMPERS
1. ANY OEM STOCK AUTOMOBILE BUMPER, MUST START WITH AN OEM BUMPER, YOU MAY LOAD THE FRONT AND REAR BUMPER IF YOU CHOOSE, IT HAS TO BE STOCK APPEARING OR YOU WILL NOT RUN!!! All reinforcement must be in bumper itself or behind it. You may weld bumper bracket to frame 4 inches from the back of bumper, single pass only. In addition you may put 4 one inch welds on back side of bracket or to weld factory shock inside frame (example Crown Vics.).
2. Shocks may be collapsed and welded. All shocks and brackets in stock location only. Do not move! You can shorten the frame, but must have 3” of frame sticking out in front of the front body mount factory location (this mount is where your front all thread would go) cannot move front body mount i.e. ford, mercury and Lincoln. CAN NOT MOVE CORE SUPPORT. Also on the old iron GM’s you cut the piece off to square up the front frame if you choose to hard nose these cars. You can hard nose the bumpers. Don’t want to be picking up bumpers. Again all bumper brackets and shocks must be in stock location.
3. You may chain, one piece of chain per side BOLTED from the mount to mount to hold on the bumper and weld a piece of strap (2”x1/4”) from frame to bumper 1” overlap on each end.
4. Bumpers can be no higher than 26” from the ground to the top of the bumper or lower than 16” from the ground to the bottom of the bumper.
TIRES, Brakes MUST work.
1. Forklift and skid loader tires are allowed
2. All wheels and rims must be strictly stock, valve stem protectors are allowed, along with 7" STANDARD aftermarket wheel centers ONLY….. NO WHOLE CENTERS
3. Liquid in tires is allowed. Studs and screws in rims to hold tires in place are allowed
if you call me on these; the answer is most likely NO! Simple rules, simple build, keep it that way. Again do not get "creative" or read into these rules. If it is not clearly described above, it is not allowed
ALL JUDGES DECISIONS ARE FINAL
Any questions contact: Randy Schwartzkopf at 618-218-0203 call or text or at swartzpromotionsllc@gmail.com or Swartz Promotion Page or on wecrash.com under midwest section
EFFINGHAM COUNTY FAIR SATURDAY AUGUST 8TH 2020
TRUCK DERBY RULES ARE AS FOLLOWS:
PAYOUTS ( MINIMUM OF 7 TRUCKS TO HAVE THE EVENT )
1ST $ 700
2ND $ 400
3RD $ 300
ALL JUDGES DECISIONS ARE FINAL
Trucks will follow all safety rules and regulations posted in the General Rules section.
Below you will find a list of the options you have to build a truck if you choose to alter the stock configurations. We absolutely will not work with a driver to get a truck into the show. Do not read these rules trying to find grey areas and do not read between the lines because you are only setting yourself up to be pissed. We will enforce these rules very, very strictly and the Head Inspector’s say is final!
Absolutely no: Distributor protectors, radiator guards (other than stock A.C. condenser), tranny protectors, or tranny case modifications. Also, absolutely no rear end bracing!!!
Frame:
-No pinning, plating, filling, stuffing or painting; other than what is allowed in our rules.
-Frame may be seam welded. Single pass only.
-Pre-rans are allowed 4 plates. Plates are only allowed on a visible bend and cannot be bigger than 4”x8” max.
Bumper/Bumper Mounting:
-Homemade pointy bumpers must have a tapered point that closely resembles a Chrysler pointy bumper
-Bumpers may be plated on the inside and on the backing of the bumper. No sharp edges.
-Any front bumper bracket may be used on any truck. If you choose to, you may make your shocks out of 2”x2” tubing.
-Absolutely no bracket or shock may be welded past 6 inches behind the factory core support mount hole on the frame rail. If your trucks factory shock or bracket goes farther than 6 inches back, it must remain completely factory beyond the allotted 6 inches.
-Bumper height is a maximum of 26 inches to the bottom of the front bumper and a minimum of 18 inches to the bottom of the rear bumper.
Suspension:
-Front suspensions may be converted from coil spring design to leaf spring design. Keep the leaf springs mounts minimal. Do not use them to strengthen the frame.
-Tie rods can be welded up 1"x1"x1/4" Angle to tube of tie rod ONLY
-You may add 2 clamps in front of the axle and 3 behind the axle. Max of 2 bolts per clamp. Bolts can’t be bigger than 3/8” and clamps can only be 2” wide. No duct tape or welding on the springs.
-Aftermarket steering shafts are allowed.
-Solid front suspensions are allowed but do not use this to strengthen the frame or you will need to cut it in order to run.
Drivetrain:
-Any motor or transmission in any vehicle.
-Pulley protectors allowed
-Skid plates allowed but can’t extend more than a ½” from the pan they are protecting.
-Solid lower engine mounts are allowed.
-Slider shafts are allowed.
-No rear ends bigger than a 3500 series pickup. If running a dually rear end you may only run one wheel per side. No rear end bracing.
Cage:
-4 point cage allowed and highly recommended.
-Gas tank protectors allowed and is not to extend more than 36 inches from the front of the bed, but can be full width of the bed.
Body:
-Doors may be welded solid and cab can be welded to bed. (please do both!!!)
-All body bolts can be replaced and bolted solid with no bolts bigger than ¾”. Only exception is you may use 1” althread in the core support and run it up through the hood. 4”x4” maximum body mount washer size.
-In addition to the 2 pieces of althread in the core support, you will be allowed 4 more bolts to hold the hood down. Must be body to body only and the washers must not exceed 4”x4”. Or you may use double stranded #9 wire in 8 spots. It must be body to body only.
-You may also run double stranded #9 wire from the front bumper to the hood or core support in 4 places only.*
-No more than 10 3/8” bolts to hold your outer hood skin to your inner hood skin.
-Tailgates may be welded solid.
-You may fold bedsides over from the wheel wells back and tailgate may be folded over. If you choose to do so it may only be attached to bed floor with 8 double strands of number 9 wire.
-If you choose to “tuck” a suburban or other long roof vehicle you may only attach the roof to quarter panels with 8 spots of double stranded 9 wire. Body to body only!!
-Five 3/8” bolts per wheel well. Hardware washers only.
-The only acceptable rust repair is in the cab floor and front of bed where gas tank mounts. This is for safety purposes only. If you don’t follow this you simply will not run.
]ALL JUDGES DECISIONS ARE FINAL
Any questions contact: Randy Schwartzkopf at 618-218-0203 call or text or at swartzpromotionllc@gmail.com or Facebook on Swartz Promotion Page or on wecrash.com under midwest section
2020 MODIFIED RULES
1ST $ 1800
2ND $ 1000
3RD $ 700
4TH $ 400
5TH $ 300
6TH $ 200
7TH—12TH $ 100
IF ANYONE WOULD LIKE TO RUN OR SEE A TRUCK CLASS AT THE FAIR CONTACT JON BECKER TO SEE IF WE CAN MAKE IT HAPPEN
PLEASE READ THESE RULES THROUGHLY AND COMPLETELY
2020 IS A NO EXCUSE AND NO EXCEPTION YEAR!!!
ALL JUDGES DECISIONS ARE FINAL
please read carefully. If car does not pass inspection or driver is unwilling to change car to pass inspection, absolutely no refunds!!! All rules will be followed or you will not run! If it does not say it in the rules – don’t just assume you can do it. CALL FIRST!!!!
WE HAVE THE RIGHT TO REFUSE ANY ENTRY AND SPECTATOR ADMITTANCE.
1. Pit gate opens at 2:00 pm DERBY starts at 6:30 pm
2. We have two men dedicated to selling pit passes at the gate plus we will have 2 ladies to help with registrations. We have forms and waivers we will need filled out. Pit gate will open at 2 pm if you think that is sufficient. Registration table is closed at 5:30. After that the driver will need to come to the fair office to enter and pay a $20 late fee. Inspections will be on the track at the north end before they enter the pit. Pit passes are $20 and car registration is an additional $20. We do not have riders. Classes will be Modified, Semi Stock 1980 & newer, Compact, and Ladies Only Compact.
NO REFUNDS WILL BE MADE DUE TO FAILURE TO MEET REGULATIONS!
Be prepared to run heats…..
GENERAL RULES:
3. Top five in feature must actively compete at end, no driving yourself on barriers or dirt berms. Failure to comply could result in complete restart with all feature qualifiers actively competing again or disqualification.
4. No reinforcements allowed other than specified in these rules. Any metal added to reinforce the car is illegal. You will only be allowed 2 trips thru the inspection line.
5. NO PAINTING, UNDERCOATING, OILING OR GREASING OF FRAMES. YOU WILL NOT BE INSPECTED. THIS INCLUDES PAINTING OF THE FRAME FLAT BLACK.
6. NO HITTING IN DRIVERS DOOR, but no using driver door as a shield. If the hit is deemed by the official to be careless or intentional, you will be disqualified. If you use your driver’s door as a defense, we will not enforce the rules. If you use the door as a defense repeatedly you will be disqualified. This will be at the judges’ discretion.
7. NO hot-rodding in the pits! Keep it at an idle.
8. Any open door or second fire will cause disqualification. If in a heat, you may fix it and come back in the consolation. In the feature, you will be disqualified.
9. You must make AGGRESSIVE contact every 60 seconds.
10. Sandbagging is not tolerated and will be strictly enforced. Locking up the brakes prior to a hit for anything other than a driver’s door will be cause for disqualification. The fans pay to see a show, put one on for them!
11. IF YOU THINK SOMEONE IS SANDBAGGING, HIT THEIR CAR WITH YOUR CAR ON THE TRACK.
12. Winning cars plus three out of the money must remain on track until released by officials, or will not be paid prize money. Cars are subject to re-inspection before any prize money is handed out. Cars found illegal will be stripped of all prize money for that event.
13. Any questions or controversies will be discussed at the drivers meeting
14. YOU MUST HAVE AT LEAST A 12” X 12” ROOF SIGN WITH YOUR CAR NUMBER ON IT.
15. All drivers must pick up trophies and earnings at the completion of the event, or forfeit. They will not be available after that date.
16. All persons MUST sign entry form, insurance waiver, release form, pay entry fees, and purchase pit pass before entering pit area.
17. THERE IS NO ALCOHOL IN THE PITS. This includes pit crews. If you or ANY of your crew is caught with alcohol, you will be disqualified.
18. No harassing of the judges will be allowed at any time by drivers, passengers, crewmembers or spectators. Failure to abide by this rule, the driver will forfeit all money and all involved will be escorted from premises.
19. Registration forms will be filled out the day of the event. All drivers must be at least 16 years of age; drivers 16 and 17 must have a parent or legal guardian sign a minor release form
20. All drivers must wear approved helmets, eye protection either safety glasses or visor on helmet, long pants, and shirt. Also all drivers and riders must wear working seat belts. This will be enforced in 2020 or you will not run!!!!
21. - Drivers must remain in the vehicle with helmet, seatbelt and eye protection on until notified by an official that it is safe to exit the vehicle.
22. A driver that receives a black flag for an intentional door hit will be disqualified from all competition for that night. A driver that receives a black flag for sandbagging or 1 fire in the interior of the car will be disqualified. 2 fires on the exterior will be disqualified, if in heat you may go to consolation. This will be at the judges’ discretion.
23. This is not a team event; team driving will not be tolerated
24. All drivers must attend drivers’ meeting prior to derby
25. All cars must be removed from derby site by 12:00 noon the following day unless otherwise stated at drivers meeting. Failure to do this will result in cars being removed by and becoming property of Fair Board.
26. DO NOT READ ANYTHING INTO THESE RULES, JUST READ THE RULES!! If it doesn't say you can, YOU CAN'T!
27. DO NOT paint anywhere on suspension or frame; if we can tell it’s been painted, we will not even inspect your car.
28. ALL SUNROOFS MUST BE COVERED WITH A THIN SHEET OF METAL, I.E. WELED OR BOLTED (WITH BOLT HEAD INSIDE THE CAR) OR RIVETED. NO # 9 wire or chain to accomplish this will be allowed.
2020 MODIFIED RULES
1. Passenger cars or station wagons only. No trucks, jeeps, hearses, or limousines. NO CHRYSLER IMPERIALS 73 & OLDER AND NO IMPERIAL SUB-FRAMES. NO 61 – 69 LINCOLNS. Cars previously run in Demolition Derby may install new front clip. Any clip may be used on any car, MUST be installed in stock manner. Officials MUST approve installation.
2. All glass, side windows, rear windows, headlights and taillights, must be removed before reaching racetrack. Rolling down windows is not permitted.
3. Rear seat of sedan must be removed, top and bottom. On station wagons all seats and decking must be removed. Station wagons must be emptied to floorboards. All cars must be swept clean, both drivers compartment and trunk. No spare tires, broken glass, or trash, etc., allowed in cars.
4. Cars must have a seatbelt and working brakes. MANDATORY!!
5. You can carry a fire extinguisher, but it must be mounted securely and free of movement
6. Battery may be moved, but must be securely fastened and covered in passenger compartment. MAXIMUM OF TWO AUTOMOBILE TYPE BATTERIES ALLOWED.
7. Any type automotive radiator may be used but must be mounted in stock position. NO RESERVE TANKS. Electric fan may be used.
8. Fenders may be bolted together with 3/8 inch bolts or smaller with 3/8 inch or smaller washers only. A maximum of 10 bolts per fender.
9. All doors may be welded (Outside of body only), chained or wired. Straps should not be larger than ¼” thick or 4 inches wide on door shell (vertical) and 2 inches wide on window frame. You may beat top of doors down and weld them. No extra metal added.
10. No doubling of body panels allowed, no added metal allowed.
11. Patching floorboards, if you have to patch rusty floorboards you must cut out all the rust, overlap no more than 1” with same thickness as body material and sheet metal screws – no more than one every 4”. No Welding to floorboards or firewall.
12. You may crease and fold body panels but do not weld. No extra metal may be added.
13. NO OTHER BODY WELDS OTHER THAN WHAT IS LISTED ABOVE.
14. All sunroofs must be covered with a thin sheet of metal, I.E. welded, bolted (with bolt head inside the car) or riveted.
HOODS, TRUNKS AND BODY BOLTS
MUST BE OPEN AT INSPECTION! So don’t come to inspection line with hood bolted down….
1. , HOODs Hoods must have two (2) holes, at least four (4) inches in diameter on each side of carburetor – Not directly on top of carburetor. IF HOOD IS REMOVED, EITHER FAN BLADE MUST BE REMOVED OR FAN BELT MUST BE CUT.
2. On all cars, hoods, trunks, and tailgates may be secured with the following method: on front of car, HOOD: two pieces of 1 inch all thread, NO SLEEVING ENTIRE ALL THREAD JUST BETWEEN CORE SUPPORT AND FRAME, YOU CAN WELD IT, with a washer no larger than six (6) inches O.D. and 3/8 inch thick, all threads MUST be mounted outboard of the radiator. In addition to all threads, six (6) 1 inch O.D. bolts with a washer no larger than six (6) inches O.D. and 3/8 inch thick, or you may use angle iron back to back with a bolt through it. Angle iron cannot be more than 3/16 thick or longer than 6 inches. Three on each side of car, a total of six. Total of 6 bolts and 2 up front all threads holding the hood down and any amount of wire or cable. All wire, or cable MUST be mounted outboard of radiator. A maximum of 50 bolts 3/8 inch or smaller are allowed to bolt together hood seams.
TRUNK, 4 pieces of 5/8 inch all thread, with a washer no larger than six (6) inches O.D. and 3/8 inch thick, all threads may be mounted through deck lid and frame anywhere in trunk, can be welded to the frame or in body mount holes. In addition to all threads, you may weld trunk 5” SKIP 5” (MEANS NO METAL) 5 off, Straps not be larger than ¼” thick or 2 inches wide or six (6) 1 inch O.D. bolts with a washer no larger than six (6) inches O.D. and 3/8 inch thick, and any amount of wire or cable. If trunk is welded must have a 12” hole in trunk lid. On station wagons two pieces of 1 inch all thread, with a washer no larger than six (6) inches O.D. and 3/8 inch thick, all threads may be used in the rear through roof and stock body mount replacing existing bolt.
TAILGATE 5 on 5 off, you may weld 5” SKIP 5” (MEANS NO METAL) 5 off, Straps not be larger than ¼” thick or 2 inches wide or six (6) 1-inches O.D. bolts with a washer no larger than six (6) inches O.D. and 3/8 inch thick, and any amount of wire or cable. YOU CAN WELD WASHERS (no bigger than 5/8 washer and must be at least 12” apart) TO THE BODY TO RUN WIRE THROUGH.
3. You may have rear window bar 2”X2”X1/4” MAX. IN SIZE, 6” max. on roof 4”X4”X1/4” FLAT PLATE TO ATTACH TO THIS BAR TOP AND BOTTOM and must be centered on front side drip rail on trunk no further back or forward (2” on each side). Weld to the strapping on your trunk. There must be 6” minimum distance (gap) from the top of this bar on the roof and halo bar…. This is the only location allowed for this bar.
\4. All other may be replaced with 1 inch O.D. bolts with a washer no larger than six (6) inches O.D. and 3/8 inch thick. YOU CAN REMOVE BODY BUSHING AND SET BODY ON THE FRAME. Body mount bolts inside passenger compartment that are close together may have one washer six (6) inches x twelve (12) inches, must have two (2) or more body mount bolts through washer. You may add two (2) additional body mount bolts per side inside passenger compartment. All all-threads MUST have nut on top and bottom or you can weld the bottom of the all thread to the frame. Vertical part of the frame only.
5. A minimum of one chain or wire running from the outside (top) of roof down to the cowl or BAR DOWN TO DASH BAR OF CAGE on the front window is MANDATORY for safety. Maximum of two. IF USING METAL STRAPS MAX. SIZE 2” WIDE X ¼” THICK, 12” ID APART. CAN GO TO FRONT DASH BAR OR COWL THEN TO TOP LIP AREA OF WINDSHIELD ONLY.
CAGE AND HALO BARS
1. All driver and passenger doors may be reinforced. You should have a six (6)-point cage, cross bars may be ran as follows, one across dash, one behind front seats, and one in rear seat area. You can run four (4) down tubes, two (2) per side. No further forward then the inner front door seam, Lower door bars are allowed between down tubes must be 6 inches or more above top of frame. NOTHING OUT OF DRIVERS’ COMPARTMENT. You can have steel plate between cage and front doors. Must be securely fastened to cage. Front bar must be mounted no more than 2” below the bottom of the front window seal and be no more than 4” in diameter. Must have 6” between front bar and center of firewall on a fresh car. Front bar cannot be attached to firewall at any time. ALL DOWN TUBES MUST BE BEHIND DASH BAR, STRAIGHT UP AND DOWN AND ON FLAT PART OF FRAME. CAN NOT GO TO BODY MOUNT BOXES. NO KICKERS TO REAR HUMPS. NOTHING OUT OF REAR DRIVERS COMPARTMENT. Without a DP you can have a bar (kicker) is allowed 2”x2”x1/4” SQUARE stock from your dash bar to 2” behind A arm (NOT UP AGAINST ARM OR WELED TO IT) MAX. SIZE 2”x2”x1/4” O.D. THIS SIZE WILL BE STRICTLY ENFORCED OR YOU WILL NOT RUN. If you have a DP on your motor you’re not allowed this bar/kicker. You cannot weld anything to front bar protruding toward the distributor protector. No grater blades, metal plates or tubing on exterior of body (driver & passenger doors).
2. 3RD bar must stay inside of interior of rear drivers compartment. Nothing can be added to the top or bottom of this bar.
3. Halo bar are allowed. Can be attached to door bar. Could be run to the frame but it would be counted as one of your down tubes. Nothing attached to halo bar.
4. This is not mandatory but we encourage everyone to put a steel plate between cage and front driver and passenger doors. Thickness of metal is up to driver. Must be securely attached to cage, must be 2” off of floor, this is for protection not reinforcement.
5. DP can’t touch dash bar during or at the end of the derby or you will be disqualified
FRAME
1. Top frame seams from front of A-arms forward may have single bead of weld added. Must be single pass no wider than 3/8” wide by 3/8” high, no extra metal may be added. DO NOT REWELD ENGINE CROSS MEMBER SEAMS OR ANYTHING THAT ATTACHES TO IT OR SUB –FRAME AND ANY OTHER BRACKETS ATTACHED TO FRAME. NO CONCRETE!!! DO NOT WELD FACTORY HOLES UP; ALL FACTORY HOLES MUST BE OPEN FOR INSPECTION OF FRAME.
A. CAN’T REWELD TORSION BARS TO CRADLE
2. FULL SIZE MOD. CARS ONLY may pitch frame in front. ON THE OUTSIDE OF FRAME ONLY YOU CAN ONLY REWELD THE WELDS THAT YOU HAVE TO CUT TO PITCH THE FRONT. MUST BE SINGLE PASS NO WIDER THAN 3/8” WIDE BY 3/8” HIGH DO NOT REWELD ALL OF THE WELDS ON THE BOXES. NO ADDED METAL. NO EXTRA BRACING OR GUSSETS. DO NOT CUT AND REWELD ON TOP OR BOTTOM.
3. FULL SIZE MOD. CARS ONLY may have hump plates. Hump plates can be no longer than 22" long: 11" each way from the center of the hump; 1/4" or less thickness and contour to frame width and hump; on the outside of the frame only, and must contour to the shape of the frame and have a 3/8” inspection hole drilled through plate and frame for inspection. If you do a leaf spring conversation from coils you’re not allowed the hump plates.
A. If your car came with factory leaf springs, NO hump plates
4. You cannot alter frame in any way other than specified in rules. Do not crease or reshape frame.
5. You cannot add or replace engine cross members. 03 and up must use factory engine cross member (cradle)
6. If you use FACTORY UPPER TRAY ORIGINAL MUST BE LEFT IN, non-watts tray must be 1” or more from frame rails. It can be bolted or welded. No welds, gussets, or bracing to frame rails. If you use factory lower brackets they must be mounted in factory position. They may be welded with welds no more than the FACTORY WELDS would be. DO NOT OVER WELD!!! If you use aftermarket or homemade upper or lower brackets they may be bolted only! NO WELDING AFTERMARKET OR HOMEMADE BRACKETS TO FRAME!!!
7. You may run one (1) wire or chain from frame rail to frame rail underneath back of car behind rear end.
8. You may put a bolt with a stamped flat washer thru frame to hold it together. Only one (1) per wheel opening must be loose during inspection. DO NOT weld washer. (Pinning of frame)
9. You may notch the frame for minimal pre-bending, but do NOT weld the cut.
10. Buick, Olds or Pontiacs YOU MAY fill the large hole in the frame behind the radiator support.
11. If changing front stub, you can overlap 2 ½”, able to weld both sides, but no adding extra metal. MUST BE FROM SAME MAKE AND MODEL.
12. If restubbing one side of the frame, you are allowed to cut and fit the new frame flush and weld one pass all the way around (butt – fit – weld).
13. All trailer hitches MUST be totally removed.
14. If running a used car prior to this derby, you are allowed 8 patch plates outside of the frame only. No plate larger than 4”x4”x1/4”, and must be painted a fluorescent color. So it is easily noticed for the inspectors. AFTER INSPECTION OR HEATS NO WELDING THESE PLATES ON. IF ADDITIONAL PLATES ARE FOUND AFTER INSPECTION – NO MONEY WILL PAID OUT
15. 4 plates on fresh cars to fix/patch rust holes outside the frame only, unless it’s a preran/used car then follow patch plate rule.
BUMPERS
NO BUMPER MOUNTING/BRACKETS PAST FACTORY LOCATION
1. Any OEM shock canister may be bolted or welded to any car. AMOUNTS OF BOLTS OR WELDS MAY NOT EXCEED TYPICAL STOCK INSTALLATION. Homemade bumper brackets are permitted, NO GUSSETS OR BRACING. NOT TO EXTEND BEHIND OEM MOUNTING BOLT LOCATION ON FRAME. May use 2½” max. Round or square tubing. No thicker than ¼ inch. No solid stock may be used. Any OEM stock automobile bumper may be bolted or welded to the shock canister or bumper brackets. You may use two (2) pieces of light chain per shock. Fenders and bumper ends may be trimmed to allow for wheel clearance.
2. Front bumper may be reinforced inside or outside and end to end. You may weld outer chrome of bumper to inner skin of bumper. Nothing else can be welded to outer chrome. You cannot alter angle of bumper. Anything coming out of bumper during race will be cause for disqualification. 11” of point and must contour from frame to frame and must be stock appearing on pointy bumpers.
3. You may have 6" long 4" wide 1/4" thick bumper support bracket, butt fit against bumper or 2" onto bumper. If you’re running a preran and choice to put your extra. 4 by 4 1/4" plate up front there must be at least a 1/8" gap between the 2 plates. Any questions please call.
SUSPENSION
1. Stiffness of suspension will be left up to the discretion of the driver.no aftermarket spindles allowed. Suspension parts must be OEM. A-arms may be bolted or lightly welded with strap no more than ¼” thick and 2” wide, MUST RUN STRAIGHT UP AND DOWN. One in front and one behind A-arm for a total of 2 per A-arm. Can be to upper or lower A-arm, but not both. Can only be welded 2” on A-arm and 2” on frame. Only a 2”X2” area on each end of strap may be welded to A-arm and frame. DO NOT WELD ENTIRE A-ARM TO THE FRAME! NO OTHER METAL ADDED!
2. Homemade or aftermarket tie rods (NO HEIMS) and homemade steering shaft are permitted.
ENGINE AND TRANSMISSION
1. ANY ENGINE OR TRANSMISSION MAY BE USED IN ANY CAR, BUT MUST BE MOUNTED IN A STOCK POSITION. ON A V-BLOCK MOTOR, FRONT SPARK PLUGS MUST BE EVEN OR IN FRONT OF UPPER BALL JOINT; ON IN-LINE MOTORS, NUMBER TWO (2) SPARK PLUG MUST BE EVEN OR IN FRONT OF UPPER BALL JOINT.
2. Chained, welded, or homemade motor mounts will be permitted, but must meet approval of officials.
3. Any type of header is allowed, but must be directed away from driver compartment.
4. Transmission oil coolers and engines oil coolers are permitted. All tranny lines must be wrapped or run through PVC. Inspection personnel must approve all mountings, lines, and fittings.
5. Skid plates are allowed. Must be separate oil/transmission plates. No full-length skid plates. No bolting or welding to frame.
6. Distributor protectors are allowed. Cannot be any wider than 12” and must not protrude more than 2” from transmission mounting surface on back of engine block. Must be attached to engine or transmission mounting bolts.
7. You may beat flat the engine side of the firewall only, do not weld or bolt firewall. Do not re-enforce the firewall/cowl. Do not beat, paint, bolt, weld on, weld to or modify the driver’s side of the firewall/cowl in any way.
8. Transmission protectors are allowed. MUST HAVE 2” BETWEEN PROTECTOR AND CROSS MEMBER ON A FRESH CAR. PROTECTOR CAN NOT BE WELDED OR BOLTED SOLID TO CROSS MEMBER. MUST FLOAT OVER CROSS MEMBER.
9. IF ORIGINAL CROSS MEMBER IS REPLACED, YOU MAY USE OEM OR 2” ANGLE IRON OR 2” CHANNEL MAX OR 2”X 2”X ¼” O.D. NOTHING thicker than ¼ inch. Thick. This will be strictly enforced or you will not run.
GAS TANKS
1. Stock gas tank MUST be removed. A METAL BOAT TANK OR HOMEMADE METAL TANK must be mounted in rear seat area and bolted down with metal straps. NO PLASTIC TANKS!!!Other types of installations will not be allowed. NO GAS CANS with hoses duct taped. A Marine (boat) tank or an official approved homemade tank is mandatory. All tanks MUST be covered with a rubber cover. All tanks MUST have secure cap. All lines and fittings MUST be leak proof and meet approval of Officials. Electric fuel pumps are permitted but MUST have shut-off within reach of driver. NO MORE THAN ten (10) GALLONS OF GAS IN TANK.
REAR END
1. Any automobile rear end can be used in any car. TRUCK OR FLOATER REAR ENDS can be used in any car. You can transform a coil spring to leaf spring or vice versa. Only on the following models: 80 and newer Ford, 79 and newer Chrysler and 77 and newer GM. On models originally equipped with leaf springs, stock leaf springs and hangers MUST be used. Leaf packs on all cars may have no more than 8 leaves per pack Must be OEM stock. Homemade spring perches or homemade trailing arm brackets may be welded to rear end. Rear end spider gears may be welded solid. You may tilt rear end by shortening or lengthening rear end control arms. Trailing arms may be reinforced. Rear end housing may be reinforced. No dually wheels allowed.
Any drive shaft or U joint may be used. Welding of drive shaft is permitted. Pinion brake ok
No extra metal added. Any bracket that shows reinforcement to the frame will not be allowed. JUDGES HAVE FINAL DECISION.
You may have five (5) spring clamps per spring. You pick if you want them in front of or behind axle, or split them between the front and back.
TIRES
1. Only sixteen (16) inch or smaller tires and wheels will be allowed. NO SPLIT RIMS ALLOWED. All wheels and rims must be strictly stock, valve stem protectors are allowed. You can have 10" STANDARD aftermarket wheel centers ONLY….. NO WHOLE CENTERS
2. Valve stem protectors, liquid in tires permitted or screws in rims to hold tires in place permitted.
3. Forklift and skid loader tires are allowed
ALL JUDGES DECISIONS ARE FINAL
Any questions contact: Randy Schwartzkopf at 618-218-0203 call or text or at swartzpromotionsllc@gmail.com or on Facebook on Swartz Promotions Page and on wecrash.com under Midwest section
MINI-CAR RULES 2020 EFFINGHAM COUNTY ONLY
ALSO FOR LADIES ONLY MINIS/COMPACTS
SATURDAY AUG. 8TH AT 6:30 PM
PAYOUT:
1 ST $ 700
2 ND $ 400
3 RD $ 300
4 TH $ 200
5 TH $ 100
LADIES PAYOUT:
1st $400
2nd $200
3rd $100
FRONT WHEEL DRIVE MINIS ONLY
ALL JUDGES DECISIONS ARE FINAL!!!
Please read carefully. If car does not pass inspection or driver is unwilling to change car to pass
inspection, absolutely no refunds!!! All rules will be followed or you will not run! If it does not
say it in the rules – don’t just assume you can do it. CALL FIRST!!!!
THE ANY COUNTY FAIR HAS THE RIGHT TO REFUSE ANY ENTRY AND SPECTATOR
ADMITTANCE.
1. Pit gate opens at 2 pm DERBY starts at 6:30 pm
2. PLEASE READ THESE THROUGHLY AND COMPLETELY. 2020 IS A NO EXCUSE AND
NO EXCEPTION YEAR!!
NO REFUNDS WILL BE MADE DUE TO FAILURE TO MEET REGULATIONS!
GENERAL RULES
3. Top five in feature must actively compete at end, no driving yourself on barriers or dirt berms.
Failure to comply could result in complete restart with all feature qualifiers actively competing
again, or disqualification.
4. No reinforcements allowed other than specified in these rules. Any metal added to reinforce
the car is illegal. You will only be allowed 2 trips thru the inspection line.
5. NO PAINTING, UNDERCOATING, OILING OR GREASING OF FRAMES. YOU WILL
NOT BE INSPECTED. THIS INCLUDES PAINTING OF THE FRAME FLAT BLACK.
6. NO HITTING IN DRIVERS DOOR, but no using driver door as a shield. If the hit is deemed
by the official to be careless or intentional, you will be disqualified. If you use your driver’s door
as a defense, we will not enforce the rules. If you use the door as a defense repeatedly you will
be disqualified. This will be at the judges’ discretion.
7. NO hot-rodding in the pits! Keep it at an idle.
8. Any open door or second fire will cause disqualification. If in a heat, you may fix it and come
back in the consolation. In the feature, you will be disqualified.
9. You must make AGGRESSIVE contact every 60 seconds.
10. Sandbagging is not tolerated and will be strictly enforced. Locking up the brakes prior to a
hit for anything other than a driver’s door will be cause for disqualification. The fans pay to see a show, put one on for them!
11. IF YOU THINK SOMEONE IS SANDBAGGING, HIT THEIR CAR WITH YOUR CAR
ON THE TRACK.
12. Winning cars plus three out of the money must remain on track until released by officials, or
will not be paid prize money. Cars are subject to re-inspection before any prize money is handed
out. Cars found illegal will be stripped of all prize money for that event.
13. Any questions or controversies will be discussed at the drivers meeting
14. YOU MUST HAVE AT LEAST A 12” X 12” ROOF SIGN WITH YOUR CAR NUMBER
ON IT.
15. All drivers must pick up trophies and earnings at the completion of the event, or forfeit. They
will not be available after that date.
16. All persons MUST sign entry form, insurance waiver, release form, pay entry fees, and
purchase pit pass before entering pit area.
17. THERE IS NO ALCOHOL IN THE PITS. This includes pit crews. If you or ANY of your
crew is caught with alcohol; you will be disqualified.
18. No harassing of the judges will be allowed at any time by drivers, passengers, crewmembers
or spectators. Failure to abide by this rule, the driver will forfeit all money and all involved will
be escorted from premises.
19. Registration forms will be filled out the day of the event. All drivers must be at least 16 years of age; drivers 16 and 17 must have a parent or legal guardian sign a minor release form
20. All drivers must wear approved helmets, eye protection either safety glasses or visor on
helmet, long pants, and shirt. Also, all drivers and riders must wear working seat belts. This will
be enforced in 2020 or you will not run!!!!
21. - Drivers must remain in the vehicle with helmet, seatbelt and eye protection on until
notified by an official that it is safe to exit the vehicle.
22. A driver that receives a black flag for an intentional door hit will be disqualified from all
competition for that night. A driver that receives a black flag for sandbagging or 1 fire in the
interior of the car will be disqualified. 2 fires on the exterior will be disqualified, if in heat you
may go to consolation. This will be at the judges’ discretion.
23. This is not a team event; team driving will not be tolerated
24. All drivers must attend drivers’ meeting prior to derby
25. All cars must be removed from derby site by 12:00 noon the following day unless otherwise
stated at drivers meeting. Failure to do this will result in cars being removed by and becoming
property of Fair Board.
26. DO NOT READ ANYTHING INTO THESE RULES, JUST READ THE RULES!! Don’t read any into it.
27. DO NOT paint anywhere on suspension or frame; if we can tell it’s been painted, we will
not even inspect your car.
28.. ALL SUNROOFS MUST BE COVERED WITH A THIN SHEET OF METAL, I.E.
WELED OR BOLTED (WITH BOLT HEAD INSIDE THE CAR) OR RIVETED. NO # 9
wire or chain to accomplish this will be allowed. wire or chain to accomplish this will be
allowed.
2019 MINI-CAR RULES
EFFINGHAM COUNTY ONLY
FRONT WHEEL DRIVE MINIS ONLY
1. Must be powered by four- or six-cylinder engine
2. Wheelbase must be 108 inches or less. NO EXCEPTIONS!
A. NO moving/bending a stock or aftermarket component to shorten wheel base.
3. No four-wheel drive vehicles.
4. MANDATORY! All four/six-cylinder cars must have a cage. Four point minimum.
5. Stock gas tank MUST be removed. A METAL BOAT TANK OR HOMEMADE METAL
TANK must be mounted in rear seat area and bolted down with metal straps. NO PLASTIC
TANKS!!!
A. Battery and gas tank must be tight when coming through inspection line or you wont
be inspected.
6. All lines under car must be steel lines or if running rubber lines, they must be inside of the car.
7. If OEM bumper had no bolts bumper homemade bumper brackets may go six (6) inches from
back side of bumper.
8. No pipe over struts.
9. No kickers
10. No aftermarket or homemade extreme cradle/pullet protector
ALL JUDGES DECISIONS ARE FINAL
1. Cars previously run in Demolition Derby may install new front clip. Any clip may be used on
any car, MUST be installed in stock manner. Officials MUST approve installation.
2. All glass, side windows, rear windows, headlights and taillights, must be removed before
reaching racetrack. Rolling down windows is not permitted. Remove all glass mirrors and
plastic. Remove all decking in wagons. Vehicles must be swept clean of all debris
3. Rear seat of sedan must be removed, top and bottom. On station wagons all seats and decking must be removed. Station wagons must be emptied to floorboards. All cars must be swept clean, both drivers compartment and trunk. No spare tires, broken glass, or trash, etc., allowed in cars.
4. Cars must have a seatbelt and working brakes. MANDATORY!!
5. You can carry a fire extinguisher, but it must be mounted securely and free of movement.
6. Battery may be moved, but must be securely fastened and covered in passenger compartment.
MAXIMUM OF TWO AUTOMOBILE TYPE BATTERIES ALLOWED.
7. Any type automotive radiator may be used but must be mounted in stock position. NO
RESERVE TANKS. A radiator cradle is allowed made of 1/8” metal 1” wider than the radiator.
Bolted only to car and nothing in front of the radiator. AFTERMARKET OR HOME MADE
RADIATOR CRADLE.
A. Front rad. screen max. Thickest 3/8” thick, bolted or 4 1” welds.
8. Fenders may be bolted together with 3/8-inch bolts or smaller with 3/8 inch or smaller washers
only. A maximum of 10 bolts per fender.
9. All doors may be welded (Outside of body only), chained or wired. Straps cannot be larger
than ¼” thick and 4 inches wide on door shell (vertical) and 2 inches wide on window frame.
You may beat top of doors down and may tack them in three places with a maximum of 1” weld
each.
10. No doubling of body panels allowed; no added metal allowed.
11. Patching floorboards, if you have to patch rusty floorboards you must cut out all the rust,
overlap no more than 1” with same thickness as body material and sheet metal screws – no more
than one every 4”. No Welding to floorboards or firewall.
12. You may crease/enhance sheet metal body panels but do not fold and weld. No extra metal
may be added.
13. NO OTHER BODY WELDS OTHER THAN WHAT IS LISTED ABOVE. THIS
INCLUDES BODY SEAMS ANYWHERE ON THE CAR.
14. ALL SUNROOFS MUST BE COVERED WITH A THIN SHEET OF METAL, I.E.
WELED OR BOLTED (WITH BOLT HEAD INSIDE THE CAR) OR RIVETED. No #9
wire or chain to accomplish this will be allowed.
HOODS AND TRUNKS
MUST BE OPEN AT INSPECTION! So, don’t come to inspection line with hood bolted down….
1. HOODS: must have two (2) holes, at least four (4) inches in diameter on each side of
carburetor – Not directly on top of carburetor. IF HOOD IS REMOVED, EITHER FAN BLADE
MUST BE REMOVED OR FAN BELT MUST BE CUT.
2. NO SECOND ALL THREAD WELDED TO SIDE OF THE FRAME AND RAN
THROUGH THE AT MID POINT OF THE HOOD.
3. On all cars, hoods, trunks, and tailgates may be secured with the following method: on front of car, two pieces of 1 inch all thread, NO SLEEVING, can have a 4” or less spacer free floating
or welded between core support and frame, with a washer no larger than six (6) inches O.D. and 3/8-inch-thick, all threads MUST be mounted outboard of the radiator. In addition to all threads, six (6) 1-inch O.D. bolts with a washer no larger than six (6) inches O.D. and 3/8-inch-thick, or you may use angle iron back to back with a bolt through it. Angle iron cannot be more than 3/16 thick or longer than 6 inches. Three on each side of car, a total of six. Total of 6 bolts and 2 up front all threads holding the hood down and any amount of wire or cable. All wire, or cable MUST be mounted outboard of radiator. A maximum of 20 bolts 3/8 inch or smaller are allowed to bolt together hood seams.
TRUNK 4 pieces of 5/8 inch all thread, with a washer no larger than six (6) inches O.D. and 3/8
inch thick, all threads may be mounted through deck lid and frame anywhere in trunk, can be
welded to the frame or in body mount holes. In addition to all threads, you may weld trunk 5 on
5 off, Straps should not be larger than ¼” thick or 4 inches wide or six (6) 1-inch O.D. bolts with
a washer no larger than six (6) inches O.D. and 3/8-inch-thick, or 10 3/8” bolts in the drip rail,
not both one or the other and any amount of wire or cable. If trunk is welded must have a 12”
hole in trunk lid. On station wagons two pieces of 1 inch all thread, with a washer no larger than
six (6) inches O.D. and 3/8-inch-thick, all threads may be used in the rear through roof and stock
body mount replacing existing bolt.
TAILGATE weld 5 on 5 off, Straps should not be larger than ¼” thick or 4 inches wide or six
(6) 1-inches O.D. bolts with a washer no larger than six (6) inches O.D. and 3/8 inch thick, and
any amount of wire or cable. YOU CAN WELD WASHERS (no bigger than 5/8 washer and
must be at least 12” apart) TO THE BODY TO RUN WIRE THROUGH.
A. No carburetor protector outside the intake area or DP.
B. You may have rear window bar 2”X2”X1/4” MAX. IN SIZE, 6” max. on roof
4”X4”X1/4” FLAT PLATE TO ATTACH TO THIS BAR TOP AND BOTTOM and must
be centered on front side drip rail on trunk no further back or forward (2” on each side).
Weld to the strapping on your trunk. There must be 6” minimum distance (gap) from the
top of this bar on the roof and halo bar…. This is the only location allowed for this bar.
BODY MOUNTS
1. All body mount bolts may be replaced with 1/2-inch O.D. bolts with a stamped washer. Do not take them out and place body on frame. If replaced, a gap of 1” minimum is mandatory between body and frame. You may replace with a stack of washers, or one piece of anything solid, as long as it is about the same diameter as the factory bushing. Do NOT crush factory body bushings. Body mount bolts inside passenger compartment that are close together may have one washer six (6) inches x twelve (12) inches, must have two (2) or more body mount bolts through washer. You may add two (2) additional body mount bolts per side inside passenger compartment. All all-threads MUST have nut on top and bottom and NO welds.
1. A minimum of one chain or wire running from the outside (top) of roof down to the cowl or
BAR DOWN TO DASH BAR OF CAGE on the front window is MANDATORY for safety.
Maximum of two. IF YOU HAVE A PASSENGER MUST HAVE
2. IF USING METAL STRAPS MAX. SIZE 2” WIDE X ¼” THICK, 12” ID APART. CAN GO TO FRONT DASH BAR OR COWL THEN TO TOP LIP AREA OF WINDSHIELD ONLY.
CAGE AND HALO BARS
1. All driver and passenger doors may be reinforced. You should have a six (6)-point cage,
MININMUM OF A 4PT. CAGE. cross bars may be ran as follows, one across dash, one behind
front seats, and one in rear seat area, 3 rd bar must stay inside of interior of rear drivers
compartment, nothing past front of package tray. Nothing can be added to the bottom of this bar.
2. You can run four (4) down tubes, two (2) per side. 2 of these down tubes must mounted
mandatory in the following way on each side, 1 down tube must be to flat part of the frame no
further forward then the inner front door seam, with a max distance of 2’ from the same
measuring point. Lower door bars are allowed between down tubes must be 6 inches or more
above top of frame. NOTHING OUT OF DRIVERS’ COMPARTMENT. You can have steel
plate between cage and front doors. Must be securely fastened to cage. Front bar must be
mounted no more than 2” below the bottom of the front window seal and be no more than 4” in diameter. Must have 6” between front bar and center of firewall on a fresh car. Front bar cannot be attached to firewall at any time. ALL DOWN TUBES MUST BE BEHIND DASH BAR,
STRAIGHT UP AND DOWN AND ON FLAT PART OF FRAME. CAN NOT GO TO BODY
MOUNT BOXES. NO KICKERS TO REAR HUMPS. NOTHING OUT OF REAR DRIVERS
COMPARTMENT. You cannot weld anything to front bar protruding toward the distributor
protector. No grater blades, metal plates or tubing on exterior of body (driver & passenger
doors). DP can’t touch dash bar during or at the end of the derby or you will be disqualified.
3. Halo bars are allowed. Can be attached to bar behind your seat or could be run to the frame but it would be counted as one of your down tubes. There must be 6” minimum distance (gap) from halo bar and the top of your rear window bar…. Nothing can be attached to halo bar
4. This is not mandatory but we encourage everyone to put a steel plate between cage and front driver and passenger doors. Thickness of metal is up to driver. Must be securely attached to cage, must be 2” off of floor, this is for protection not reinforcement.
FRAME
1. DO NOT REWELD ENGINE CROSS MEMBER SEAMS OR ANY OTHER BRACKETS
ATTACHED TO FRAME OR SHEET METAL under hood or trunk. NO CONCRETE!!! DO
NOT WELD FACTORY HOLES UP; ALL FACTORY HOLES MUST BE OPEN FOR
INSPECTION OF FRAME.
2. You cannot alter frame in any way other than specified in rules. Do not crease or reshape
frame.
3. You may run one (1) wire or chain from frame rail to frame rail underneath back of car behind back tires/wheels.
4. You may put a bolt with a stamped flat washer thru frame to hold it together. Only one (1) per wheel opening must be loose during inspection. DO NOT weld washer. (Pinning of frame)
5. You may notch the frame for minimal pre-bending, but do NOT weld the cut.
6. If changing front stub, cut 3 inches behind second cross member bolt hole. When replacing,
can overlap 2 ½”, able to weld both sides, but no adding extra metal. Must be of the same
make and model.
7. If restubbing one side of the frame, you are allowed to cut and fit the new frame flush and
weld one pass all the way around (butt – fit – weld). Must be of the same make and model.
8. All trailer hitches MUST be totally removed.
9.2020 THIS INCLUDES MINI’S: If running a used car prior to this derby, you are allowed 4
patch plates max. Size 4”x4”x1/4”. Must be painted a bright color. So, it is easily noticed for the
inspectors. AFTER INSPECTION OR HEATS NO WELDING THESE PLATES ON. IF
ADDITIONAL PLATES ARE FOUND AFTER INSPECTION – NO MONEY WILL PAID
OUT
10. Attachment of lower front sub frame to body, can use only chain 3/8” or smaller, can weld
the links at each end for attachment points. But on a used/preran car you can use a metal strap,
but each one counts toward/as your patch plates
11. No plates on fresh cars to fix/patch rust holes, unless it’s a preran/used car then follow patch plate rule.
BUMPERS
1. Any OEM shock canister may be bolted or welded to any car. AMOUNTS OF BOLTS OR
WELDS MAY NOT EXCEED TYPICAL STOCK INSTALLATION. Homemade bumper
brackets are permitted, NO GUSSETS OR BRACING. NOT TO EXTEND BEHIND OEM
MOUNTING BOLT LOCATION ON FRAME. May use 2½” max. Round or square tubing. No
thicker than ¼ inch. No solid stock may be used. This can only extend into the frame a max.
of 8”. Will be drilled at 8 ¼” measured from the front edge of the frame on every car. Any
OEM stock automobile bumper may be bolted or welded to the shock canister or bumper
brackets. You may use two (2) pieces of light chain per shock. Fenders and bumper ends may be
trimmed to allow for wheel clearance.
2. Front bumper may be reinforced inside or behind and end to end. Must have chrome on the
outer part of the bumper from any OEM bumper shaped to fit. You may weld outer chrome of
bumper to inner skin of bumper. Nothing else can be welded to outer chrome. You cannot alter
angle of bumper. Anything coming out of bumper during race will be cause for disqualification.
11” of point and must contour from frame to frame and must be stock appearing on pointy
bumpers. (the curve of point must start at each frame)
3. You may have 6” long 4” wide x 1/4 thick bumper support bracket, butt fit against bumper or onto bumper. If you’re running a preran and choice to put your extra. 4 by 4 1/4; plate up front there must be at least a 1/8” gap between the 2 plates. Any questions please call.
SUSPENSION
1. Stiffness of suspension will be left up to the discretion of the driver. NO OTHER METAL
ADDED!
2. Homemade tie rods and homemade steering shaft are permitted.
3. No pipe over struts
4. No front bumper straps to core support or all thread
ENGINE AND TRANSMISSION
1. ANY ENGINE OR TRANSMISSION MAY BE USED IN ANY FRONT WHEEL DRIVE
CAR, BUT MUST BE MOUNTED IN A STOCK POSITION 4 or 6 CYLINDER ONLY
2. Chained, welded, or homemade motor mounts will be permitted, but must meet approval of
officials.
3. At motor mount to sub-frame your allowed 2 per side of motor mount a 2”x3”x1/4” plate on
its side welded to frame and engine cradle
4. Any type of header is allowed, but must be directed away from driver compartment.
5. Transmission oil coolers and engines oil coolers are permitted. Inspection personnel must
approve all mountings, lines, and fittings.
6. Skid plates are allowed. Must be separate oil/transmission plates. No full-length skid plates.
No bolting or welding to frame.
7. Distributor protectors are allowed. Cannot be any wider than 12” and must not protrude more than 2” from transmission mounting surface on back of engine block. Must be attached to engine or transmission mounting bolts.
8. No aftermarket or homemade extreme cradle/pullet protector
9. No carburetor protector outside the intake area or DP. *No aftermarket or homemade
attachments to rad. Core support or fire wall. Nothing outside of the normal/factory type
attachment points.
10. You may beat flat the engine side of the firewall only, do not weld or bolt firewall. Do not re-enforce the firewall/cowl. Do not beat, paint, bolt, weld on, weld to or modify the driver’s side of the firewall/cowl in any way.
11. Transmission protectors are allowed. MUST FLOAT OVER CROSSMEMBER
12. Must have stock/OEM cross member
GAS TANKS
1. Stock gas tank MUST be removed. A METAL BOAT TANK OR HOMEMADE METAL
TANK must be mounted in rear seat area and bolted down with metal straps. Other types of
installations will not be allowed. NO GAS CANS with hoses duct taped. A Marine (boat) tank or
an official approved homemade tank is mandatory. All tanks MUST be covered with a rubber
cover. All tanks MUST have secure cap. All lines and fittings MUST be leak proof and meet
approval of Officials. Electric fuel pumps are permitted but MUST have shut-off within reach of
driver. NO MORE THAN ten (10) GALLONS OF GAS IN TANK.
2. NO PLASTIC TANKS, unless in a wooden box 1” thick minimum or a metal box ¼”
minimum. All sides except top side. This also goes for if your using a metal boat tank.
3. Mounted in center of the back-side area.
FOR THE MINI-CAR DERBY CLASS, YOU WILL NO LONGER BE ABLE TO MOVE THE STOCK GAS
TANK INTO THE BACK-SEAT AREA. For mini autocross only you can leave factory tank under
the car.
REAR END
1. Factory rear end, REMEMBER FRONT WHEEL DRIVE ONLY. You may tilt rear end by
shortening or lengthening rear end control arms. Trailing arms may be reinforced.
2. Any drive shaft or U joint may be used. Welding of drive shaft is permitted.
3. No extra metal added. Any bracket that shows reinforcement to the frame will not be allowed.
JUDGES HAVE FINAL DECISION.
TIRES
1. Only sixteen (16) inch or smaller tires and wheels will be allowed. NO SPLIT RIMS
ALLOWED.
2. Valve stem protectors, liquid in tires permitted or screws in rims to hold tires in place
permitted.
ALL JUDGES DECISIONS ARE FINAL
Any questions contact: Randy Schwartzkopf at 618-218-0203 call or text or at
Swartzpromotionsllc@gmail.com
SEMI- STOCK 80 and NEWER 2020 Rules
EFFINGHAM COUNTY FAIR
PAYOUT:
1ST $ 1500
2ND $ 700
3RD $ 300
4TH $ 200
5TH $ 100
PLEASE READ THESE RULES THROUGHLY AND COMPLETELY
2020 IS A NO EXCUSE AND NO EXCEPTION YEAR!!!
ALL JUDGES DECISIONS ARE FINAL !!!
Please read carefully. If car does not pass inspection or driver is unwilling to change car to pass inspection, absolutely no refunds!!! All rules will be followed or you will not run! If it does not say it in the rules – don’t just assume you can do it. CALL FIRST!!!!
THE ANY COUNTY FAIR HAS THE RIGHT TO REFUSE ANY ENTRY AND SPECTATOR ADMITTANCE.
1. Pit gate opens at 2:00 pm DERBY starts at 6:30 pm
SEMI- STOCK 80 and NEWER 2020 Rules
1. 1980 and newer, No Imperials, no Suicide Lincolns, no hearses
2. Cars must have seatbelts and working brakes “MANDATORY”
Body
1. Remove all glass mirrors and plastic. Remove all decking in wagons
Vehicles must be swept clean of all debris
2. No sedagons, ZERO sheet metal folding or frame shaping. Creasing sheet metal enhancements is allowed, but rear quarters and taillight lance area attachment points must remain vertical/straight up and in factory position. You can change front clip must be of the same make and model.
3. Deck and Hood must be 100% in stock location and open for inspection or able to see into with a 12” cut out (you may cut up to 50% of the trunk/deck lid off or remove completely) or a single 90 degree bend. Must stay on factory hinges
4. Anything can be removed, NOTHING can be added
5. FASTEN DOWN HOODS, TRUNKS AND TAIL GATES (4 each) in 1 of the following 3 ways, NO mix and match!!! First way: 4 places with ½” bolts sheet metal to sheet metal, Second way: (4) 3” long angle iron ¼” thick max. Back to back, with 1- ½” bolt per angle iron. Third way: #9 wire double stranded max. Also you may replace front 2 body mounts with two 1" threaded rod, you may replace 2 of the 4 rear body mounts in the trunk area with two 1" threaded rod (front 2 or rear2) must be installed to replace factory mounts. 3 inch diameter washers ¼” thick max. Bottom nut and washer may be on bottom side of the frame, not to extend 1” past nut and may extend through hood and truck. ZERO welding allowed mounting any of these threaded rods.
6. Can have a 4” or less spacer free floating between core support and frame
7. Hoods must have two (2) holes, at least four (4) inches in diameter on each side of carburetor not directly on top of carburetor.
8. IF HOOD IS REMOVED, EITHER FAN BLADE MUST BE REMOVED OR FAN BELT MUST BE CUT.
9. A maximum of 20 bolts 3/8 inch or smaller are allowed to bolt together hood seams.
10. Driver doors vertical seams maybe welded solid, all other doors may be welded 6 inches ON AND 6 OFF per vertical door seam only. 4” x 1/8” strap. Do not weld hood or trunk!
BODY MOUNTS
1. Body mounts and spacers to remain stock and in place. If they are broken or rusted out, may be replaced with a 1/2” max. size bolt mounted up in frame in stock position with rubber grommet in place, with a 2”x 2”x1/8” washer top and bottom side of bolt. If body mounts are changed/replaced you must cut away the factory sheet metal for inspection.
2. A minimum of one chain or wire running from the outside (top) of roof down to the cowl or BAR DOWN TO DASH BAR OF CAGE on the front window is MANDATORY for safety. Maximum of two. IF USING METAL STRAPS MAX. SIZE 2” WIDE X ¼” THICK, 12” ID APART. CAN GO TO FRONT DASH BAR OR COWL THEN TO TOP LIP AREA OF WINDSHIELD ONLY. REAR WINDOW BARS ARE NOT ALLOWED!
3. Allowed “10”- 3/8” bolts per wheel opening, with 3/8” max. size washer
FRAMES
1. NO welding on frames allowed. (Except where stated in the rules)
2. NO cutting flap to tilt, cold bend ok
3. If running a used car prior to this derby, you are allowed 4 patch plates max (must be on the outside of the frame). Size 4”x4”x1/4”. Must be painted a bright color. So it is easily noticed for the inspectors. AFTER INSPECTION OR HEATS NO WELDING THESE PLATES ON. IF ADDITIONAL PLATES ARE FOUND AFTER INSPECTION – NO MONEY WILL PAID OUT
4. No plates on fresh cars to fix/patch rust holes, unless it’s a preran/used car then follow patch plate rule.
5. You can shorten the frame, but must have 3” of frame sticking out in front of the front body mount factory location (this mount is where your front all thread would go) cannot move front body mount i.e. ford, mercury and Lincoln. CAN NOT MOVE CORE SUPPORT. Also on the old iron GM’s you cut the piece off to square up the front frame if you choose to hard nose these cars.
SUSPENSION
1. Modifications allowed. Ride height and bounce/suspension give will be left up to the driver as long as it meets the min. and max. ride height requirements. Must remain strictly OEM stock. ZERO aftermarket parts, except where noted.
2. May reinforce factory tie rod or use aftermarket tie rods, but must have factory style tie rod ends. NO HEIMS.
3.. A-arms may be bolted or lightly welded with strap no more than ¼” thick and 2” wide, MUST RUN STRAIGHT UP AND DOWN. One in front and one behind A-arm for a total of 2 per A-arm. Can be to upper or lower A-arm, but not both. Can only be welded 2” on A-arm and 2” on frame. Only a 2”X2” area on each end of strap may be welded to A-arm and frame. DO NOT WELD ENTIRE A-ARM TO THE FRAME! NO OTHER METAL ADDED!
Strictly enforced.
4. Bumpers (front and rear) can be no higher than 26” from the ground to the top of the bumper or lower than 16” from the ground to the bottom of the bumper
5. You may use spring spacers store bought or homemade as long as it meets height requirements of the bumpers
6. You may have a double strand of #9 wire or 5/16’ chain to hold coil spring to rearend and leaf sprung cars may use 4 single strands of #9 wire as leaf clamps or factory clamps. No exceptions
7. From frame to frame behind rear end you may have up to 4 strands of #9 wire twisted together or one 3/8” chain or smaller.
DRIVE TRAIN
1. ANY drivetrain allowed with the following criteria.
2. ANY ENGINE OR TRANSMISSION MAY BE USED IN ANY CAR, BUT MUST BE MOUNTED IN A STOCK POSITION. ON A V-BLOCK MOTOR, FRONT SPARK PLUGS MUST BE EVEN OR IN FRONT OF UPPER BALL JOINT; ON IN-LINE MOTORS, NUMBER TWO (2) SPARK PLUG MUST BE EVEN OR IN FRONT OF UPPER BALL JOINT.
3. You may use factory or aftermarket motor mounts. Only the lower motor mounts may be welded to engine cradle only. You may use two 1/2" thick spacers to raise engine to clear steering components, may not exceed rubber mount area.
4. No tranny protectors/braces, stock mounting only, stock cross members only, you may use a 2”x 2”x 1/4” angel iron 4” long welded only to inside frame rail to mount your stock cross member I.E. CHEVY DRIVE LINE IN A FORD. No other welding
5. You may weld rearend gears / spools ok. Pinion brake ok
REAR END
1. REARENDS WILL STAY THE AS 2018, YOU CAN WELD STOCK OEM BRACKETS TO ANY 5 LUG REAREND, Reared swaps allowed no bracing, and no re-enforcement. Max axle size 31 spline, Ford, GM or Mopar Clarification: All must be factory axles(cast flanges) and rear ends, must be a direct bolt-in, NO fabricating or welding allowed of axles or reared(inside or outside)
2. All money winners will be subject to pull axles before payout at official’s discretion
A. Watts link or box ford package tray can be weld in, but no more than it would have come from the factory. For lower control arm must use the factory bracket welded to side of the frame in the factory location and with factory weld amount for 98-02’s
3. On models originally equipped with leaf springs, stock leaf springs and hangers MUST be used.
4. Leaf packs on all cars MUST be OEM stock.
5. Slider drive shaft is permitted.
6. You may have five (5) spring clamps per spring.
7. No reinforced trailing arms, stock only, you may tilt rear ends. You may shorten or lengthen trailing arms. You may overlap 4" and weld, no added metal. DO NOT WELD ON FRAMES.
8. You cannot transform a leaf spring car to coils or vice versa.
9. You can weld on rear-ends, such as spring perches, trailing arm brackets, and spider gears. 10. You may put one loop of small chain over the stock cross member and around rear end one each side. Cannot go inside car floor.
11. You may also put one light chain or #9 4 strands twisted together across, between rear frame rails behind rear end.
12. You may run chain from rear end to frame, nothing thru body. 5/16” max. Size chain.
13. Aftermarket shifters, headers, gas and brake pedals allowed, Clarification: none may strengthen car.
14. If you have a DP on your motor and wish not to take it off you must cut dash out 4” wider on each side of DP. THIS WILL BE STRICTLY ENFORCED, SO BE SURE TO CUT ENOUGH OUT.
9. Engine cradles allowed (front plate, DP and lower cradle)
10. DP and or DASH CAN NOT TOUCH DASH BAR AT ANY POINT DURING OR AFTER THE DERBY.
11. Pulley protectors are allowed, but sway bar may be removed or not able to touch before or after the race/derby!!!!
12. Any driveshaft and U joint is allowed, may be cut and welded to length.
13. No homemade/aftermarket radiator cradles for 2019, secure radiator with other mines.
CAGE AND HALO BAR:
1. 6 point square cage only, 1 down tube MANDTORY per side to flat part of the frame, no further forward then the inner front door seam, with a max distance of 2’ from the same measuring point. 6 inch max diameter. 3RD bar must stay inside of interior of rear driver’s compartment, IN FRONT OF PACKAGE TRAY AREA.
2. Halo bar allowed, only to the back seat bar (in line with center bar ...No further back), not to floor. Nothing can be attached to Halo Bar.
3. Also inside drivers compartment you’re allowed 2 spots/places of #9 wire to the frame, 4 strands twisted together.
4. Drivers door must be padded.
5. Gas tank and battery must be moved, secured and covered. Tank behind the seat, Battery centered in the passenger front floor.
6. NO PLASTIC TANKS, unless in a wooden box 1” thick minimum or a metal box ¼” minimum. All sides except top side. This also goes for if your using a metal boat tank.
7. Mounted in center of the back side area.
A. Battery and gas tank must be tight when coming through inspection line or you wont be inspected.
8. Nothing may be mounted in a way that strengthens the car.
9. Trans and engine coolers allowed. Must be mounted in rear seat area and meet the approval of the officials.
10. May add knuckles to factory OEM columns or run an aftermarket column
BUMPERS
1. ANY OEM STOCK AUTOMOBILE BUMPER, MUST START WITH AN OEM BUMPER, YOU MAY LOAD THE FRONT AND REAR BUMPER IF YOU CHOOSE, IT HAS TO BE STOCK APPEARING OR YOU WILL NOT RUN!!! All reinforcement must be in bumper itself or behind it. You may weld bumper bracket to frame 4 inches from the back of bumper, single pass only. In addition you may put 4 one inch welds on back side of bracket or to weld factory shock inside frame (example Crown Vics.).
2. Shocks may be collapsed and welded. All shocks and brackets in stock location only. Do not move! You can shorten the frame, but must have 3” of frame sticking out in front of the front body mount factory location (this mount is where your front all thread would go) cannot move front body mount i.e. ford, mercury and Lincoln. CAN NOT MOVE CORE SUPPORT. Also on the old iron GM’s you cut the piece off to square up the front frame if you choose to hard nose these cars. You can hard nose the bumpers. Don’t want to be picking up bumpers. Again all bumper brackets and shocks must be in stock location.
3. You may chain, one piece of chain per side BOLTED from the mount to mount to hold on the bumper and weld a piece of strap (2”x1/4”) from frame to bumper 1” overlap on each end.
4. Bumpers can be no higher than 26” from the ground to the top of the bumper or lower than 16” from the ground to the bottom of the bumper.
TIRES, Brakes MUST work.
1. Forklift and skid loader tires are allowed
2. All wheels and rims must be strictly stock, valve stem protectors are allowed, along with 7" STANDARD aftermarket wheel centers ONLY….. NO WHOLE CENTERS
3. Liquid in tires is allowed. Studs and screws in rims to hold tires in place are allowed
if you call me on these; the answer is most likely NO! Simple rules, simple build, keep it that way. Again do not get "creative" or read into these rules. If it is not clearly described above, it is not allowed
ALL JUDGES DECISIONS ARE FINAL
Any questions contact: Randy Schwartzkopf at 618-218-0203 call or text or at swartzpromotionsllc@gmail.com or Swartz Promotion Page or on wecrash.com under midwest section
EFFINGHAM COUNTY FAIR SATURDAY AUGUST 8TH 2020
TRUCK DERBY RULES ARE AS FOLLOWS:
PAYOUTS ( MINIMUM OF 7 TRUCKS TO HAVE THE EVENT )
1ST $ 700
2ND $ 400
3RD $ 300
ALL JUDGES DECISIONS ARE FINAL
Trucks will follow all safety rules and regulations posted in the General Rules section.
Below you will find a list of the options you have to build a truck if you choose to alter the stock configurations. We absolutely will not work with a driver to get a truck into the show. Do not read these rules trying to find grey areas and do not read between the lines because you are only setting yourself up to be pissed. We will enforce these rules very, very strictly and the Head Inspector’s say is final!
Absolutely no: Distributor protectors, radiator guards (other than stock A.C. condenser), tranny protectors, or tranny case modifications. Also, absolutely no rear end bracing!!!
Frame:
-No pinning, plating, filling, stuffing or painting; other than what is allowed in our rules.
-Frame may be seam welded. Single pass only.
-Pre-rans are allowed 4 plates. Plates are only allowed on a visible bend and cannot be bigger than 4”x8” max.
Bumper/Bumper Mounting:
-Homemade pointy bumpers must have a tapered point that closely resembles a Chrysler pointy bumper
-Bumpers may be plated on the inside and on the backing of the bumper. No sharp edges.
-Any front bumper bracket may be used on any truck. If you choose to, you may make your shocks out of 2”x2” tubing.
-Absolutely no bracket or shock may be welded past 6 inches behind the factory core support mount hole on the frame rail. If your trucks factory shock or bracket goes farther than 6 inches back, it must remain completely factory beyond the allotted 6 inches.
-Bumper height is a maximum of 26 inches to the bottom of the front bumper and a minimum of 18 inches to the bottom of the rear bumper.
Suspension:
-Front suspensions may be converted from coil spring design to leaf spring design. Keep the leaf springs mounts minimal. Do not use them to strengthen the frame.
-Tie rods can be welded up 1"x1"x1/4" Angle to tube of tie rod ONLY
-You may add 2 clamps in front of the axle and 3 behind the axle. Max of 2 bolts per clamp. Bolts can’t be bigger than 3/8” and clamps can only be 2” wide. No duct tape or welding on the springs.
-Aftermarket steering shafts are allowed.
-Solid front suspensions are allowed but do not use this to strengthen the frame or you will need to cut it in order to run.
Drivetrain:
-Any motor or transmission in any vehicle.
-Pulley protectors allowed
-Skid plates allowed but can’t extend more than a ½” from the pan they are protecting.
-Solid lower engine mounts are allowed.
-Slider shafts are allowed.
-No rear ends bigger than a 3500 series pickup. If running a dually rear end you may only run one wheel per side. No rear end bracing.
Cage:
-4 point cage allowed and highly recommended.
-Gas tank protectors allowed and is not to extend more than 36 inches from the front of the bed, but can be full width of the bed.
Body:
-Doors may be welded solid and cab can be welded to bed. (please do both!!!)
-All body bolts can be replaced and bolted solid with no bolts bigger than ¾”. Only exception is you may use 1” althread in the core support and run it up through the hood. 4”x4” maximum body mount washer size.
-In addition to the 2 pieces of althread in the core support, you will be allowed 4 more bolts to hold the hood down. Must be body to body only and the washers must not exceed 4”x4”. Or you may use double stranded #9 wire in 8 spots. It must be body to body only.
-You may also run double stranded #9 wire from the front bumper to the hood or core support in 4 places only.*
-No more than 10 3/8” bolts to hold your outer hood skin to your inner hood skin.
-Tailgates may be welded solid.
-You may fold bedsides over from the wheel wells back and tailgate may be folded over. If you choose to do so it may only be attached to bed floor with 8 double strands of number 9 wire.
-If you choose to “tuck” a suburban or other long roof vehicle you may only attach the roof to quarter panels with 8 spots of double stranded 9 wire. Body to body only!!
-Five 3/8” bolts per wheel well. Hardware washers only.
-The only acceptable rust repair is in the cab floor and front of bed where gas tank mounts. This is for safety purposes only. If you don’t follow this you simply will not run.
]ALL JUDGES DECISIONS ARE FINAL
Any questions contact: Randy Schwartzkopf at 618-218-0203 call or text or at swartzpromotionllc@gmail.com or Facebook on Swartz Promotion Page or on wecrash.com under midwest section