noser23x
Feature Winner
R.W.C.
Posts: 1,969
|
Post by noser23x on Nov 25, 2019 13:59:12 GMT -5
I am looking to get a catalog of sorts of front frame rail widths. I am primarily after vic (03+ and 02 down), old iron GM, metric GM, old iron cadillac, shocker/y framer, and any mid 70s ford stuff. I need the outside of the frame rail to the outside of frame rail and the inside of frame rail to inside of frame rail.
Any help provided is very much appreciated.
|
|
Landshark007
Feature Winner
I'm not here to win I'm here to make sure you don't win
Posts: 4,228
|
Post by Landshark007 on Nov 25, 2019 18:42:30 GMT -5
I work at a junkyard so I can get a lot of them when I’m not bizy
|
|
|
|
Post by DerbyKing88s on Nov 25, 2019 20:03:20 GMT -5
Where do you want me to measure a caddy at and what r u making me lol
|
|
noser23x
Feature Winner
R.W.C.
Posts: 1,969
|
Post by noser23x on Nov 25, 2019 20:41:02 GMT -5
Where do you want me to measure a caddy at and what r u making me lol About 18" in front of a arm, or wherever the cutoff is at big shows. Its more of just some stress analysis stuff, I work in an engineering department so trying to determine stresses on bumpers with different frame widths. Im a nerd lol. |
|
|
|
Post by DerbyKing88s on Nov 25, 2019 22:50:08 GMT -5
Make a program that will tell me where my frame is going to bend. I’ve heard of it before lol. I’ll get u measurements next time I’m out at the shop or have a tape measure close when I have the driver
|
|
noser23x
Feature Winner
R.W.C.
Posts: 1,969
|
Post by noser23x on Nov 26, 2019 9:47:58 GMT -5
Make a program that will tell me where my frame is going to bend. I’ve heard of it before lol. I’ll get u measurements next time I’m out at the shop or have a tape measure close when I have the driver I have done some pretty specific research on that but gussets inside frame etc. Make a difference. But I have done an embarrasing amount of bumper bracket research. |
|
|
|
Post by DerbyKing88s on Nov 26, 2019 12:13:35 GMT -5
Well lmk any info that will help lol
|
|
