|
Post by dean88 on Nov 3, 2018 20:17:24 GMT -5
Ya idk of that would be a way to identify or not. It's not, only way to tell is pull the cover.
|
|
|
Post by DerbyKing88s on Nov 3, 2018 20:30:43 GMT -5
Gotcha
|
|
|
Post by beefybuilt104 on Nov 9, 2018 23:47:02 GMT -5
Yeah it is definitely not a full floater rear end, there is no hub sticking out.i would get something else as they probably are c clip axles. 10 bolt being yes it probably is a Dana 60 but still.
|
|
|
Post by taz8665 on Nov 11, 2018 9:48:05 GMT -5
Alright so we started out with 24" high before and we were able to lower the ass end down to 17" with clamps and also a few threaded rods. And yes we started tucking the trunck
|
|
|
Post by klicky96 on Nov 11, 2018 10:50:52 GMT -5
Is your axle sitting above or below the springs?
|
|
|
Post by taz8665 on Nov 11, 2018 10:55:45 GMT -5
Above springs or it would look like this
|
|
|
Post by Luke Wells on Nov 11, 2018 11:12:34 GMT -5
Where will you be running this car?
|
|
|
Post by taz8665 on Nov 11, 2018 11:16:08 GMT -5
Wisconsin
|
|
|
Post by Underbuilt on Nov 11, 2018 13:46:18 GMT -5
Would never recommend tucking a leaf spring car...
|
|
|
Post by beefybuilt104 on Nov 11, 2018 14:32:11 GMT -5
What kind of show in Wisconsin? There’s lots of them. County fair? Or a bigger show? What promoter?
|
|
|
Post by taz8665 on Nov 11, 2018 14:36:44 GMT -5
County fairs but um. Action auto promotion and also international demo derby
|
|
|
Post by taz8665 on Nov 11, 2018 14:37:25 GMT -5
Might even do the Wisconsin state demo derby in Wausau Wisconsin
|
|
owen11x
Feature Winner
Ford makes it, Chevy shakes it, Mopar breaks it!
Posts: 2,585
|
Post by owen11x on Nov 11, 2018 14:45:13 GMT -5
Would never recommend tucking a leaf spring car... I tuck 99% of my leafed cars and never had any sort of issue. Guess id like to hear this reasoning. There's more than one way to build the rear of a leaf car with good results
|
|
|
Post by beefybuilt104 on Nov 11, 2018 14:59:23 GMT -5
County fairs but um. Action auto promotion and also international demo derby Well depends which international show you run I would love to see how it holds up in person. Those are the shows I run are international weld class.
|
|
|
Post by taz8665 on Nov 11, 2018 15:00:22 GMT -5
Alright if I run one its in fond du lac Wisconsin
|
|