demoboy333
Feature Winner
Enter your message here...
Posts: 3,124
|
Post by demoboy333 on Nov 12, 2016 22:54:22 GMT -5
Drives you nuts don't it lol
|
|
wreckit87
Feature Winner
I'm here to get smashed and bang in public
Posts: 1,023
|
Post by wreckit87 on Nov 13, 2016 8:38:30 GMT -5
Drives you nuts don't it lol It does.. A lot. Lol
|
|
|
Post by Forney00c on Nov 20, 2016 20:34:41 GMT -5
Did some research while bored. An rat rod guy says he used a vic frame to go under a 63 galexie. Now for you to measure it all under bc fEames not going to line right back up where original was. An will swap a leaf car to coil is down side That would take a ton of work since the side rails on those frames aren't straight they have a bow to them not to mention the mounts would be way way off. Stubbing a 58-64 isn't too bad but to do a total frame swap would be a nightmare. Not to mention, a full Vic frame swap to a 60's Ford leaves you without the leafs in the back and would probably take away from the brick shithouse that the rear end of those cars can be. As you said, the rails under the doors bow out on the old Fords, and the only reason I could see using any part of a Vic frame is to stub it and get rid of the C-channel, weak spring pockets, etc.
|
|
demoboy333
Feature Winner
Enter your message here...
Posts: 3,124
|
Post by demoboy333 on Nov 22, 2016 22:04:31 GMT -5
I did mention the leafs being replaced with coil. An also said it was be alot of work due to frames being alot different. Glad to see u took the time took reread before commenting on what I had to say instead of saying no spend more time on the factory frame an body of the 98 to 02. Like most of us have told him. I just was giving him a body some one has used. Not saying it was gonna be easy.
|
|
d45
Heat Winner
Posts: 222
|
Post by d45 on Nov 24, 2016 10:08:40 GMT -5
I did mention the leafs being replaced with coil. An also said it was be alot of work due to frames being alot different. Glad to see u took the time took reread before commenting on what I had to say instead of saying no spend more time on the factory frame an body of the 98 to 02. Like most of us have told him. I just was giving him a body some one has used. Not saying it was gonna be easy. Only reason looking for a different body is because that is what was bad on my last car. And just need a body to put on it. Ive asked several times to different people that i was looking for a clean body and nobody has anything.
|
|