crazychris03
Heat Winner
Enter your message here...
Posts: 398
|
Post by crazychris03 on May 3, 2016 12:39:13 GMT -5
Do you need handles on your hood nuts for the mod class
|
|
|
Post by 4umotorsports on May 3, 2016 22:44:04 GMT -5
Do you need handles on your hood nuts for the mod class I would advise you have some sort of handle on there just for easy access by track crew and/or fire dept in case of an emergency.
|
|
|
Post by 4umotorsports on May 6, 2016 8:18:29 GMT -5
...
|
|
crazychris03
Heat Winner
Enter your message here...
Posts: 398
|
Post by crazychris03 on May 6, 2016 17:56:06 GMT -5
how much wire can you have on your hood plus four hood bolts
|
|
|
Post by rookieagain on May 6, 2016 18:05:24 GMT -5
Can we weld body seams?
|
|
|
Post by rookieagain on May 6, 2016 18:06:18 GMT -5
how much wire can you have on your hood plus four hood bolts Says unlimited wire....
|
|
|
Post by 4umotorsports on May 6, 2016 20:02:14 GMT -5
how much wire can you have on your hood plus four hood bolts Unlimited #9 wire anywhere
|
|
|
Post by 4umotorsports on May 6, 2016 20:03:25 GMT -5
For the mod class, yes.Not in the stock class.
|
|
|
Post by rookieagain on May 6, 2016 20:18:15 GMT -5
For the mod class, yes.Not in the stock class. And trucks refer to mod correct?
|
|
|
Post by 4umotorsports on May 6, 2016 21:11:38 GMT -5
For the mod class, yes.Not in the stock class. And trucks refer to mod correct? Yes, if its not in the truck rules, refer to mod car rules.
|
|
|
Post by 4umotorsports on May 9, 2016 15:38:21 GMT -5
I've had alot of calls and alot texts....from the sounds of it, this should be a really good show. Gets your cars, trucks and mowers ready!!! Hope to see you all there.
|
|
|
Post by 4umotorsports on May 12, 2016 7:42:05 GMT -5
Our stock rules are very similar to the Old School rules for Cayuga IN.
|
|
|
Post by 4umotorsports on May 12, 2016 9:14:40 GMT -5
If we have 20 or more in each class, we will run heats! That goes for trucks, stocks and mods. Bring spare parts and everything you will need to run a heat, a consi and a feature!!!! Be prepared. It's always better to bring too much stuff, than not enough.
|
|
|
Post by derbyman103 on May 16, 2016 19:16:11 GMT -5
I have a question about the stock mowers. It says no reinforcing the frame but can reinforce around the engine. How is that possible?
3. REINFORCING THE FRAME IS NOT PERMITTED. TRANSAXLES MUST BE FACTORY, WELDING SPIDER GEARS IS ALLOWED, REINFORCING AROUND THE ENGINE IS ALLOWED BUT CAN'T BE OUTSIDE OF THE HOOD
|
|
|
Post by 4umotorsports on May 16, 2016 20:07:47 GMT -5
I have a question about the stock mowers. It says no reinforcing the frame but can reinforce around the engine. How is that possible? 3. REINFORCING THE FRAME IS NOT PERMITTED. TRANSAXLES MUST BE FACTORY, WELDING SPIDER GEARS IS ALLOWED, REINFORCING AROUND THE ENGINE IS ALLOWED BUT CAN'T BE OUTSIDE OF THE HOOD It is possible by welding a cage around your engine without getting exessive on the material that is welded to the frame. For example...dont weld a 6 inch plate on the frame to attach your engine cage to. You can build an engine cage with 4 simple down bars to the frame or the engine plate at each corner of the engine and attach cross bars to those.
|
|