2016 BASH FOR CASH chillicothe oh entrys open

[frankthetank]

2016 BASH FOR CASH
DEMOLITION DERBY &SWAP MEET

FRIDAY MAY 27TH , SATURDAY MAY 28TH & SUNDAY MAY 29TH 2016
ROSS COUNTY FAIRGROUNDS
CHILLICOTHE, OHIO

GATES OPEN AT 8 A.M. FRIDAY MAY 27TH

NERAT / BIG ROCK PRODUCTS 80 & NEWER CLASS $11,000 TO WIN
CLASS FULL

DERBYTEES.COM TURN BACK THE CLOCK CLASS $10,000 TO WIN
$100 ENTRY 80 ENTRY MAX

DEC HEADER COMPACT CAR CLASS $10,000 TO WIN
CLASS IS FULL
===============================================================
80 AND NEWER WIRE UP, THE YOUTH COMPACT CLASS,
STREET STOCK, JOKER’S OLD SCHOOL WIRE CLASS,
COMPACT TRUCKS AND FULL SIZE TRUCKS, ARE FULL

===============================================================
MOWERS
$50 ENTRY
Mowers will pay 100% back for 100 mowers we will pay $1250 to win

FOR RULES GO TO: WWW.SMASHITDERBY.COM

SEND ENTRY’S TO; SMASH IT DEMO DERBY’S INC.
125 RESACA ST. LONDON, OHIO 43140
CERTIFIED CHECK OR MONEY ORDER ONLY
FOR QUESTIONS AND INFO CALL TIM AT 740-857-2033

INCLUDE SHIRT SIZE ON ENTRY FORM FOR DRIVERS EVENT SHIRT

Camping $100 for weekend Friday 8 am till Monday noon extra days are $25 camping is 1st come 1st served if you want to camp with friends make sure all of you send forms in together. camping form link is smashitderby.com/uploads/bash_camping_form.pdf

Entry form link smashitderby.com/uploads/entry.pdf make sure you have your shirt size and phone number on entry

[frankthetank]

FOR THE FOLLOWING CLASSES CARS CAN NOT HAVE FIX IT PLATES

BIG ROCK PRODUCTS 80 & NEWER CLASS $11,000 TO WIN

DERBYTEES.COM TURN BACK THE CLOCK CLASS $10,000 TO WIN

DEC HEADER COMPACT CAR CLASS $10,000 TO WIN

[frankthetank]

FRIDAY MAY 27TH

830 AM Inspection for DEC headers compact class, Nerat / big rock 80 & newer class, and derbytees.com TBTC class starts
9 Am Swap meet and vendors may set up
6:00 PM ENTRY’S CLOSE FOR COMPACT TRUCKS AND 5’ CARS
6 PM Mower class will run must be signed in by 5:30 PM
6:30 PM INSPECTION FOR DEC HEADERS COMPACT CLASS CLOSES IF YOUR CAR HAS NOT PASSED BY THIS TIME YOU WILL NOT RUN. IT IS THE DRIVERS RESPONSIBILITY, SO GET THERE EARLY
7 PM Compact qualifying heats begin
Compact Truck class after qualifying class
5’ Class will run after compact trucks


SAT. MAY 28TH
ALL NERAT / BIG ROCK PRODUCTS CLASS CARS AND DERBYTEES.COM CLASS CARS MUST BE SIGNED IN BY 10 AM OR YOU WILL HAVE TO PAY A $150 LATE FEE NO EXCEPTIONS!!!!
8 AM Inspection starts for Derbytees.com class and the derby parts.com 80 & newer class
4 PM power wheels must be signed in by 3:30 PM
4:15 pm INSPECTION FOR 80 & NEWER AND TBTC CLASS CLOSES
4:30 PM Drivers meeting all Saturday heat drivers must attend at the inspection tent
5 PM Heats begin
5:30 PM - 7:30 PM inspection for 80’s wire class
7:30 PM - dark inspection for early arrivals of other classes
All placing cars from the heats will be impounded and put in a secure building

SUN MAY 29TH
ALL CARS MUST BE SIGNED IN BY 9 AM
7 AM IMPOUNDED CARS WILL BE RELEASED
8 AM - 10:30 AM CONSI INSPECTION for both classes
8 - 9 AM inspection for full size truck class
9 - 10 AM youth class inspection
10 - 11 AM INSPECTION FOR STREET STOCK
11 AM Consolation for 80 & newer will start TBTC consolation Will follow
11 AM - 12 PM JOKERS OLD SCHOOL CLASS INSPECTION
12:30 PM drivers meeting for all 1 shot classes all drivers must attend (at the inspection tent)
1 PM Other classes will start
2 PM - 4 PM All Feature cars inspection
4:15 PM Drivers meeting all feature drivers must attend (at the inspection tent)
Features for DEC HEADERS COMPACT, DERBYTEES.COM TBTC, AND NERAT / BIG ROCK PRODUCTS 80 & NEWER CLASSES WILL START ASAP AFTER DRIVERS MEETINGS

INSPECTION TIMES ARE LISTED ABOVE, IT IS YOU THE DRIVERS THAT ARE RESPONSIBLE ON MAKING YOUR POSTED TIME FOR CLASS THAT YOUR RUNNING

[frankthetank]

rule changes are in red

BIG ROCK PRODUCTS 80 & NEWER CLASS
GENERAL
******** You must pass inspection within 3 times through inspection or you will not be allowed to run
1. Any 1980 AND NEWER American-made sedan or station wagon No Imperials. If car is painted black a 14“ x 14“ roof sign is mandatory.
2.Cars must be stock unless modifications are stated in rules. Cars must have functioning brakes at all times, at least on one axle. Helmet, seat belt, and eye protection must be worn at all times. Any controversies or protests must be brought up during the drivers meeting.
4. Any questions call first If it doesn’t say you can don’t do it. No painting of the frames. All glass, plastic, and interior must be removed before arriving to the event.
6 We have the right to re-inspect, cut, drill any car at any time. If you are caught breaking the rules set here forth you will forfeit any and all winnings and or prizes you are due. Judges decision’s are final. If you stretch a rule you will lose that rule..
7. ANY AFTER MARKET PARTS MUST BE APPROVED BY SMASH IT DEMOLITION DERBY’S YOU MUST CALL AND SUBMIT PICTURES FOR APPROVAL. PARTS THAT ARE NOT APPROVED BEFORE THE DERBY WILL NOT BE PERMITTED TO RUN.

FRAME I BUMPERS
1. Trailer hitches and braces must be removed. No plating, pinning, heat treating, stuffing the frame of any kind. DO NOT PAINT FRAME. NO WELDS ON FRAME MAY EXCEED A SINGLE PASS NO WEAVE PASSES OR BUILDING THE WELD UP WILL BE PERMITIED.
2. NO FRAME CREASING OR HAMMERING, OR BEATING DOWN THE TOP/BOTTOM OR SIDES OF FRAME IN ANY WAY PERMITTED. You can notch or crease rear frame this is to help rear of car roll not to strengthen the frame. Top Frame seams from firewall forward may be welded top side only with a single bead of weld no weave passes excessive welds will have to be removed. On 79 and older cars you may square off the front of the frame to hard nose the car no shortening of these frames are permitted All unused bolts must be removed from frame
3. Any year bumper permitted. All bumper seams may be welded, Front bumpers may be loaded bumper must be a factory car bumper FRONT AND BACK SKIN IS REQUIRED No homemade bumpers DEC bumpers are permitted ALL WORK TO BE DONE ON THE INSIDE OF THE BUMPER. No spacers of any type permitted between the front bumper and the frame bumpers may be 8“ from top to bottom and 8“ from front to back. The bumper on the rear of the car must be factory (DEC bumpers permitted) no adding of metal to bumper on rear of car will be permitted. Openings in bumper may be closed out. You may use ¼" X 2” X 6” plate to weld from bumper to frame 2 PER BUMPER MOUNTING LOCATION. Rear bumper shocks must appear stock (Must be round pipe or factory shock no square tubing will be permitted) FRONT BUMPER YOU MAY USE ONE NOT BOTH OF FOLLOWING 1. A 10” SHOCK INSIDE FRAME OR 2. A 4" wide x 3/8" thick strap extending from your bumper down one side of the frame and cannot extend any further back than the very front most part of your original factory top-front a-arm bracket factory weld. You are also allowed to wrap this strap around the front of the frame 4" to create an "L" shape this is to give you enough material to weld your bumper to the strap. Plate may be formed but it can not double at any point. Do not abuse this rule you will cut it. This strap must be on side of frame not top or bottom.
4. On the front frame they must be 25" from front of coil pockets on bottom of frame to end of the frame the bumper can not slide over the frame If a frame section needs to be replaced or repaired (rust) you must call first. If the frame has damage in the rear the back 2 body bolts may be moved no more than 6" from factory location. On pre-ran cars if the frame is shortened in the rear and bumper replaced the bumper shocks may not be located closer than 6" from hump plate.
5. NO FIX IT PLATES PERMITTED
6. Angles for cross member can't be longer than 5" CROSS MEMBER MUST RUN STRAIGHT ACROSS CAR AND MOUNT IN FACTORY LOCATION ON TRANSMISSION.
7. Body bolts and washers may be changed (1" dia. Bolt max, 3" washer max.) Must start and stop in stock location
8. Bumper can not be lower than 15" or higher than 22" from bottom of bumper. Frame may not be lower than 14".
9. For coil sprung cars you may use a hump plate they may be ¼" X 6" X 22" centered in the hump they will be measured from the top center of the hump and must start no lower than the center of the frame. Hump plate must be at least 2" from rear end housing. On new model GM's (metrics) you may use a ¼ " X 6" X 30" hump plate to be measured the same way. On leaf spring cars you may use a ¼" X 6" X 11" hump plate to be measured the same way. These hump plates may contour the frame or run straight across hump. Hump plate must remain flat plate no bending of this over the top or bottom of frame.
10. You may clip pre-ran cars with a single butt weld with no metal added must use same make and model of frame IE: ford to ford gm to gm No hybrid frames permitted on fords you can not clip a 02 and older with an 03 and newer no exceptions or vice versa.
11 You may cut factory seams at the box and re-weld to tilt the front of new style fords no metal may be added. All factory holes in frame must remain open no welding these holes shut permitted.
12. On 03 and newer fords you may use an 80 and newer ford or GM car steel cradles they must be put in like there factory counterparts only using the factory brackets no other metal may be added A ARM BRACKETS MUST BE 98 AND NEWER FORD BRACKETS ONLY. They must be in factory location and can not be moved forward. You may use a 3" spacer from the bottom of the frame to lower A-arm where the spring goes you may not alter frame in any manner other than attaching factory brackets with a single bead of weld. You can not add any type of spring pockets to frame. All factory holes in front of A arms must be open. Nothing may be welded on top of frame over the holes in front of frame. On 03 and newer fords you can not shorten the front of the frames. A ARMS must be 7 ½” behind the rear factory holes in frame in the front TO THE FRONT EDGE OF A ARMS (THE FACTORY CRUSH POINT ) A ARMS must be from a passenger car no truck or van A ARMS will be permitted

BODY / CAGE
1. Two 8" X 8" inspection holes must be put in all deck lids one on each side of deck lid within 2" of trunk strapping in center of trunk. Trunk lids must be factory for make and model of car IE: GM to GM ford to ford no pre 1980 deck lids permitted on 80 and newer cars.
2. You may weld, wire, or bolt doors, trunk lids, and or tailgates. If you wire you may use 8 double strands of #9 wire all may go around bumper or frame You may weld, wire, or bolt only. Strapping used for welding may not be stair stepped no excessive overlapping permitted. strapping may be ¼” x 3" flat stock maximum. Tops of door skins may be smashed together and welded ¼” X 3” flat stock be used Deck lids may have two 1" piece of all thread from the floor pan to the deck lid they may Attach to frame by welding the all thread to the frame no more than ½ ( HALF ) way down the side of frame and must be straight up and down And must extend through deck lid , On wagons these may go from the floor pan to rear roof pillars not the roof. You may add 3 bolts per wheel well these bolts can be in wheel well only.
3. No body seam welding will be permitted. Doors can be welded on outside of body only. On pre-ran cars the doors may be repaired back to stock. Rust repair is limited to floor boards and roofs only.
4. You may have a window bar or wire in windshield and rear window if using metal it can be no thicker than 3/8" and no wider than 3" You may use 2 x 2 pipe. not solid. These may not touch the rollover bar. They can be welded to roof no more than 6" from the window area. And welded to deck lid no more than 6"at the rear window area Metal used for this may not exceed 6" in length on roof or deck lid. YOU CAN HAVE A BAR FROM DASH BAR TO ROLL OVER BAR THIS MUST BE 5” FROM FIREWALL IF YOU HAVE QUESTIONS ON THIS CALL
5. You may have 6 bolts on the hood to keep it secure, bolts may be 1" in dia. The front 2 may go all the way through core support You may use a ¼” X 2” x 2” spacer through the core support this may be welded to top of frame and top and bottom of core support only these may not be lower than top of frame. You may also use a 4" x 4" x ¼ plate to weld to top side of frame on the front two body mounts these can weld no farther than 2" on the frame behind the body mount bolts. 1" bolts max.
6. Hoods must be open for inspection. (12" x 12" hole over carburetor) Cars may not be smashed flat If cars are tucked the rear quarter panels on both sides of cars must be 6" higher than the top of the bumper If speaker deck is removed deck lid can attach to package tray they must remain within 2“ of rear of package tray ( behind body bolts on new style fords).
7. Body mounts must remain in place or a 1" gap between body and frame with a stack of washers or spacer of some kind may be used nothing bigger than 3" x 3" permitted NO EXCEPTIONS cars without a space will not be permitted to run. 1” body bolts max. must start and stop in factory location All body mounts must be in stock location.
8. You can add a piece of angle (4" x 4" x ¼"max.) to top of the core support but can be No longer than 32" no other metal permitted on core support. No other metal permitted to be welded to core support.
9. You may have a cage surrounding the drivers compartment with a roll over bar. Bars 6" diam. Max. must be sheet metal to sheet metal only. The dash bar must be 5" from all sheet metal This will be strictly enforced. The bar behind the seat can sit no further back than where the kick panel meets the bench seat and must be at least 5" off the floor measured from the highest part of the floor/ driveshaft tunnel. . No cage components can be farther back than where the kick panel meets the bench seat. Roll over bar and rear down legs are cage components No center bar in cages permitted. You may use 2 down legs to the frame from the rear bar down to frame these must run straight down no angling of the down legs permitted. You may use a floating gas tank protector that comes off the back bar but it can not be wider than 24" The gas tank protector or holder may go all the way back to the sheet metal. Gas tank protector / holder can be welded or bolted to rear sheet metal or package tray with 2 - ½ " X 4“ bolts or 2 -- 3" welds. sheet metal can not be removed. You can have kickers from the front dash bar to the top side of frame behind A arms. 2X2 square tubing Or 2” pipe only no other material may be used they must be within 2" of A arm.
.
ENGINE / TRANSMISSION
1. Engines may be chained in with 1 chain PER SIDE standard 3/8" chain max. these chains may be no longer than 16" and no more than 2 chain links may be welded to the engine cradle NO CHAINS PERMITTED TO WELD TO FRAME RAILS IN ANY WAY Motor of choice is permitted. Distributor protectors are allowed, Nothing that attaches to engine can be wider than the stacks I.E dist. Protector, engine cradles ect or be used to strengthen cars.
2. Transmissions must be of passenger car origin, transmission coolers may be used, but they must be secured in such a way to prevent injury. Metal or braided lines must be used. No fuel or low-pressure lines may be used. Coolers must be secured in a container in the passenger compartment of the car.
3. Transmission protectors are allowed. They may not attach or brace to the cross member, frame, or any part of the cage components Trans blanket is recommended. OEM trans cross member or 2X 2 X 1/4” max replacement. Must be mounted with at least a 2 inch space from all trans protector components including shifter plate. Skid plates are allowed. They may be one piece from engine to transmission. They may not extend past oil pan or transmission pan. Don’t connect to transmission cross member. Must be 2 inch space. NO bolting or welding the skid plate to the frame.
4. NO WATER COOLERS PERMITTED OR OVERFLOW BOTTLES PERMITTED MUST BE FACTORY CAR RADIATOR OR AN OEM REPLACEMENT ONLY.

SUSPENSION
1. You may modify tie rods. Valve stem protectors are permitted. A-arms must remain in stock configuration. Any rubber tire permitted. Rear trailing arms may be Home made No bigger than 2 x 2 square tubing or pipe AND MUST MOUNT TO PACKAGE TRAY LIKE FACTORY. Doubling of tires permitted. Bead locks are permitted no bigger than 21” across.
2.Upper A arms may be welded down BY FOLDING DOWN THE A ARM AND WELDING TO FRAME WITH NO METAL ADDED. BAR TYPE A ARMS YOU MAY USE a ¼" X 2" X 2" piece of steel on front and back side of upper a arm and you may plug weld the center of the A Arm DO NOT WELD A ARMS TO FACTORY MOUNTING BRACKETS. lower A-Arms may not be welded. You can change out the new style A-arms For old style ones. Cars do not have to bounce. Solid suspension is allowed. On 98 - 02 A arm mounts you may use a 1” piece of solid rod or factory bar to connect the front and rear brackets this add on may weld to the inner parts af brackets and the top of cup over coil pockets It may not lay on top of frame. On 98-02 frames the cup over spring pockets must remain in factory location these can not be removed or modified.
3. Coil springs in rear may be welded wired or chained to rear end. No coil to leaf conversions allowed.
4. You may use rear end of choice. Rear end protectors may be used but may not be used to strengthen car in any way and must be on back of rear end. leaf spring cars may replace broken springs with factory ¼ " leaf springs only. No more than 7 springs allowed and must have a 2" stagger and mounted in factory location
5. Idler arm must be bolted factory to frame no bolts will be permitted all the way through the frame. Sway bar may be welded to bottom of frame in the factory location you may use a 1 ½ " X 4” bracket or a 2" square tubing or pipe to weld to sway bar to attach to frame. Sway bar must be a factory made car type sway bar. Sway bar ends may be bolted to lower A Arms not welded.
6. Upper and lower A Arms must be factory passenger car type no homemade ones will be permitted.
7. ANY WATTS LINK BRACKETS NOT UTILIZED MUST BE REMOVED.

***** IF YOU HAMMER / SHAPE / WELD ON FRAME IN ANY MANNER NOT COVERED IN THE RULES YOU WILL NOT BE ABLE TO RUN THERE IS NO FIXING THIS****


2016 DERBYTEES.COM TURN BACK THE CLOCK RULES
GENERAL THESE ARE RULES NOT GUIDELINES AND WILL BE ENFORCED AS SUCH
ON THE BODY MOUNT AT THE CORE SUPPORT FOR 1976 AND OLDER GM'S THE SPACER CAN BE 1" TALL MAXIMUM ALL OTHER CARS MAY HAVE A 3" TALL MAXIMUM SPACER

******** YOU MUST PASS INSPECTION WITHIN 3 TIMES THROUGH INSPECTION OR YOU WILL NOT BE ALLOWED TO RUN
1. ANY AMERICAN-MADE SEDAN OR STATION WAGON NO IMPERIALS. IF CAR IS PAINTED BLACK A 14“ X 14“ ROOF SIGN IS MANDATORY.
2.CARS MUST BE STOCK UNLESS MODIFICATIONS STATED IN RULES. CARS MUST HAVE FUNCTIONING BRAKES AT ALL TIMES, AT LEAST ON ONE AXLE. HELMET, SEAT BELT, AND EYE PROTECTION MUST BE WORN AT ALL TIMES.
3. ANY CONTROVERSIES OR PROTESTS MUST BE BROUGHT UP DURING THE DRIVERS MEETING.
4. ANY QUESTIONS CALL FIRST IF IT DOESN’T SAY YOU CAN DON’T DO IT. CARS MUST BE STOCK UNLESS MODIFICATION IS STATED IN THE RULES. NO PAINTING OF THE FRAMES. A ROOF SIGN IS RECOMMENDED.
5. ALL GLASS, PLASTIC, AND INTERIOR MUST BE REMOVED BEFORE ARRIVING TO THE EVENT.
6.ANY TIRE PERMITTED. VALVE STEM PROTECTORS ARE OK. DOUBLING OF TIRES PERMITTED
7 WE HAVE THE RIGHT TO RE-INSPECT CUT OR DRILL ANY CAR AT ANY TIME. IF YOU ARE CAUGHT BREAKING THE RULES SET HERE FORTH YOU WILL FORFIET ANY AND ALL WINNINGS AND OR PRIZES YOU ARE DUE.
8. JUDGES DECISION’S ARE FINAL. IF YOU STRETCH A RULE YOU WILL LOSE THAT RULE.
9. ANY AFTER MARKET PARTS MUST BE APPROVED BY SMASH IT DEMOLITION DERBY’S YOU MUST CALL AND SUBMIT PICTURES FOR APPROVAL. PARTS THAT ARE NOT APPROVED BEFORE THE DERBY WILL NOT BE PERMITTED TO RUN.

FRAME/ BUMPERS
1. NO HOME MADE BUMPERS OR TRAILER HITCHES PERMITTED. DEC BUMPERS ARE PERMITTED CUTTING OF FENDERS AND BUMPERS ONLY FOR WHEEL CLEARANCE IS PERMITTED. NO FRAME CREASING PERMITTED NO TILTING OR COLD BENDING THE FRAME OF ANY CAR. ALL UNUSED BOLTS MUST BE REMOVED FROM FRAME.
2. BODY-TO-FRAME HARDWARE AND BUSHINGS MAY BE REPLACED WITH 5/8 “ BOLTS, WITH 3" TOP AND BOTTOM METAL WASHER. WASHERS NOT TO EXCEED 3" X 3". IF BODY BOLTS ARE REPLACED THERE MUST BE AN 1" SPACING BETWEEN BODY AND FRAME. NO EXCEPTIONS CARS WITHOUT A SPACE WILL NOT BE PERMITTED TO RUN. DO NOT WELD THE BODY WASHERS TO THE FLOOR OR FRAME. ALL WASHERS MUST BE FREE FLOATING BODY BOLTS MUST START AND STOP IN FACTORY LOCATION AND CAN NOT RUN TO BOTTOM OF FRAME BOTTOM OF BOLTS MUST BE INSIDE OF FRAME EXCEPT FOR FRONT TWO BODY BOLTS AT CORE SUPPORT THESE MAY RUN THROUGH FRAME. FOR inspection the front body bolt at core support ON PASANGER SIDE must be removed FOR INSPECTION and replaced after inspection.
3. BUMPER SHOCKS AND BUMPER BRACKETS MAY BE WELDED TO THE FRAME. BUMPER BRACKETS AND OR SHOCKS MUST BE IN FACTORY LOCATION FOR THE CAR YOU ARE USING THESE CAN NOT BE MOVED BACK ON THE FRAME. IF USING 74-76 GM BUMPER CUPS THE BODY MOUNT HOLE IN CUPS MUST LINE UP WITH FRAME HOLES. YOU CAN HARD NOSE THE FRONT BUMPER YOU MAY USE A 2” X 6” X ¼” PLATE TO WELD BUMPER THE FRAME 2 PER SIDE THESE PLATES MUST BE ON SIDE OF FRAME NOT PERMITTED ON TOP OR BOTTOM OF FRAME. ON 71-76 GM WAGONS YOU MAY USE 4 OF THESE PLATES TO WELD REAR BUMPER TO THE BODY.IF USING 74 - 76 GM BUMPER SHOCK CUPS BODY MOUNT HOLES IN THESE AND THE FRAME MUST BI IN LINE WITH EACH OTHER
4 YOU MAY CLIP A CAR WITH FRAME DAMAGE WITH A SINGLE PASS BUT WELD NO OVERLAPPING OF FRAME AND NO METAL ADDED. WITH SAME MAKE, AND STYLE OF FRAME YOU MUST CALL FIRST TO CLIP THE CAR
5. BUMPERS MAY BE NO LOWER THAN 14” AND NO HIGHER THAN 22” TO BOTTOM OF BUMPER THIS WILL BE STRICTLY ENFORCED. BUMPER SEAMS MAY BE WELDED METAL MAY BE ADDED TO BUMPER THIS MUST BE DONE ON THE INSIDE OF THE BUMPER FRONT BUMPER ONLY REAR BUMPER MAY BE SEAM WELDED NO METAL MAY BE ADDED TO REAR BUMPER.
6. NO PLATING, PINNING, HEAT TREATING, STUFFING THE FRAME OF ANY KIND. DO NOT PAINT FRAME.
7. FOR COIL SPRUNG CARS YOU MAY USE A HUMP PLATE THEY MAY BE ¼" X 6" X 22" CENTERED IN THE HUMP THEY WILL BE MEASURED FROM THE TOP CENTER OF THE HUMP AND MUST START NO LOWER THAN THE CENTER OF THE FRAME. HUMP PLATE MUST BE AT LEAST 2" FROM REAR END HOUSING. ON 77 AND NEWER GM’S YOU MAY USE A ¼” X 6” X 30” HUMP PLATE.
8. ON 1980 AND NEWER CARS THE FRONT FRAME MAY BE CUT OFF IN FRONT OF THE FRONT BODY MOUNT AT THE CORE SUPPORT BODY MOUNT CAN NOT BE MOVED IN ANY WAY.
9.YOU MAY SEAM WELD FRAME FROM FIREWALL FORWARD TOP SIDE ONLY WITH A SINGLE BEAD OF WELD NO WEAVE PASSES NO EXCESSIVE WELDS WILL BE PERMITTED
10. NO TILTING OR PITCHING OF THE FRAME PERMITTED

BODY / CAGE
1. DOORS MAY BE WELDED ALL THE WAY AROUND ON OUTSIDE OF BODY ONLY WITH ¼: X 3” WIDE STRAPPING NO EXCESSIVE OVERLAPPING OF STRAPPING IS PERMITTED.
2. DECK LIDS AND TAILGATES MAY BE WELDED WITH A 5” ON 5” OFF RULE USING ¼” X 3” WIDE PIECES OF STEEL OR 9 WIRED OR BANDING IN 8 SPOTS. DECK LIDS AND TAILGATES MUST BE IN ORIGINAL LOCATION DECK LIDS MAY BE FOLDED DOWN IN THE TRUNK, TRUNK LIDS MAY BE DIPPED ALONG WITH SPEAKER DECK. SPEAKER DECK CAN BE REMOVED, BUT TRUNK LID CAN ONLY BE WELDED TO QUARTER PANELS AND TAIL LIGHT ASSEMBLY ONLY NOTHING MAY BE WELDED INSIDE OF TRUNK. TWO ( 2 ) 8” X 8” INSPECTION HOLES MUST BE PUT IN ALL DECK LIDS WITHIN 2” OF TRUNK STRAPPING IN CENTER OF DECK LID FOR INSPECTION AND FIRE SAFETY. . DECK LIDS MUST BE FACTORY FOR MAKE AND MODEL OF CAR IE: FORD TO FORD GM TO GM NO PRE 1980 DECK LIDS ON 1980 AND NEWER CARS
3. HOOD MAY BE 9 WIRED IN 8 PLACES OR BOLTED IN 6 PLACES BOLTS MAY BE 5/8” IN DIA. FRONT 2 BODY MOUNTS MAY EXTEND THROUGH CORE SUPPORT AND USED AS FRONT 2 OF THE 6 HOOD BOLTS 1” ALL THREAD MAX YOU CAN NOT SLEEVE THE ALL THREAD WITH ANYTHING FROM BOTTOM OF CORE SUPPORT AND ABOVE. A 12” HOLE MINIMUM MUST BE IN THE HOOD.
4. NO X/WIRE WILL BE PERMITTED IN WINDOW OR DOOR AREAS. REAR WINDOW BARS ARE PERMITTED IN SEDANS ONLY MILD STEEL STRAPPING 3/8” X 3" WIDE AND WELDED 3"ON ROOF AT WINDOW AREA AND 3” WELDED TO DECK LID AT WINDOW AREA. FRONT WINDOW AREA YOU MAY USE 9 WIRE FROM ROOF TO FIREWALL IN 2 PLACES TO PROTECT DRIVER FROM HOOD.
5. YOU MAY HAVE A CAGE SURROUNDING THE DRIVERS COMPARTMENT WITH A ROLL OVER BAR. BARS 4” DIA. MAX. MUST BE SHEET METAL TO SHEET METAL ONLY. THE DASH BAR MUST BE 5” FROM CENTER OF FIREWALL THE BAR BEHIND THE SEAT CAN SIT NO FURTHER BACK THAN WHERE THE KICK PANEL MEETS THE BENCH SEAT AND MUST BE AT LEAST 5” OFF THE FLOOR. ROLL OVER BAR MUST BE STRAIGHT UP AND DOWN NO ANGLING PERMITTED YOU MAY USE A GAS TANK PROTECTOR THEY CAN BE 24” WIDE AND EXTEND TO SHEET METAL MUST BE CENTERED IN CAR. YOU MAY USE A BAR FROM ROLL OVER BAR ACROSS ROOF AND CONNECT TO DASH BAR THIS BAR MUST BE 5” FROM ANY SHEET METAL. DOOR BARS MAY NOT EXTEND FARTHER FORWARD THAN DOOR HINGES.
6. A ¼ " X 6” WIDE PLATE MAY BE USED ON DRIVER'S DOOR ONLY THIS MUST BE ON OUTSIDE OF DOOR AND CENTERED. NO KICKER BARS FROM BEHIND SEAT BAR OR DASH BARS WILL BE PERMITTED.
7. YOU CAN TUCK THE CENTER OF TRUNK BUT YOU CAN NOT ROLL QUARTERS OVER THE REAR QUARTER PANELS MUST STAY IN FACTORY LOCATION. NO WEDGING OF TRUNKS OR TOPS OF CARS PERMITTED. ON PRE-RAN CARS YOU MAY TUCK THE DECK LID A LITTLE TO REPAIR BODY DAMAGE SOME BODY CREASING PERMITTED.
8. CORE SUPPORT MAY NOT BE MOVED MUST BE IN FACTORY POSITION AND BE IN LINE WITH BODY MOUNT HOLES IN FRAME
9. NO WELDING ON FIREWALL OF CAR PERMITTED FOR ANY REASON.

SUSPENSION
1. SUSPENSION MUST REMAIN FACTORY UNLESS OTHERWISE NOTED. REAR END OF CHOICE PERMITTED. TIE RODS MAY BE REINFORCED. BEAD LOCKS MAY BE USED NO BIGGER THAN 21” FROM EDGE TO EDGE.
2. UPPER A ARMS MAY BE WELDED DOWN BY FOLDING DOWN THE A ARM AND WELDING TO FRAME WITH NO METAL ADDED. BAR TYPE A ARMS YOU MAY USE A ¼" X 2" X 2" PIECE OF STEEL ON FRONT AND BACK SIDE OF UPPER A ARM AND YOU MAY PLUG WELD THE CENTER OF THE A ARM DO NOT WELD A ARMS TO FACTORY MOUNTING BRACKETS. LOWER A-ARMS MAY NOT BE WELDED. YOU CAN CHANGE OUT THE NEW STYLE A-ARMS FOR OLD STYLE ONES. CARS DO NOT HAVE TO BOUNCE. SOLID SUSPENSION IS ALLOWED.
3. REAR END BRACES MAY BE USED BUT MAY NOT BE USED TO STRENGTHEN CAR IN ANY WAY.
4. LEAF SPRING CARS MAY REPLACE BROKEN SPRINGS WITH 5/16 SPRINGS. NO MORE THAN 7 SPRINGS ALLOWED AND MUST HAVE A 2” STAGGER AND MOUNTED IN FACTORY LOCATION YOU CAN NOT MOVE SPRING MOUNTING LOCATION.
5 SOLID SHOCKS PERMITTED. YOU MAY USE 1” ALL THREAD FOR SHOCKS
6. COIL SPRING CARS MAY USE 2 X 2 SQUARE TUBING FOR TRAILING ARMS THEY MUST BE IN FACTORY LOCATION NO RELOCATING TRAILING ARMS PERMITTED. LEAF SPRING CLAMPS MAY BE 2'' WIDE 3/8” THICK 4 PER SIDE ALLOWED NO LEAF CONVERSIONS.
7. IF SWAY BARS ARE USED, FACTORY SWAY BAR BRACKETS MUST BE USED ON FRAME. NO WELDING ALLOWED.

ENGINE/ TRANSMISSION/ FUEL / GAS TANKS
1. ENGINE SWAPS ARE O.K. AFTER MARKET OR WELDED SOLID FRAME MOUNTS ARE PERMITTED. NO FORM OF MOUNTING ENGINE AND TRANSMISSION MAY STRENGTHEN FRAME OR BODY.
2. AUXILIARY TRANSMISSION COOLERS ARE PERMITTED THEY MUST BE COVERED AND SECURELY MOUNTED.
3. EXTERNAL HEADERS MAY BE USED STRAIGHT UP THROUGH HOOD ONLY. RADIATORS MAY BE REMOVED BUT CANNOT BE RELOCATED IN THE VEHICLE. RADIATOR OVERFLOW MUST BE POINTED DOWN TO THE GROUND. BOLTING OF SUB-BRACING OF HOOD IS PERMITTED IF HOLE IS CUT IN HOOD BUT SHALL NOT EXCEED 8 - ½ “ BOLTS IN HOOD.
4. DISTRIBUTOR PROTECTORS WILL BE PERMITTED. THIS MAY NOT STRENGTHEN CAR IN ANY MANNER. NO EXTRA BRACKETS, BRACING, OF ANY TYPE PERMITTED ON BODY OF CAR.
5. A TRANSMISSION BRACE MAY BE USED THIS MAY ATTACH TO BELL HOUSING OR DISTRIBUTOR PROTECTOR AND THE TAIL SHAFT. THEY MUST BE ON THE TOP OF TRANS AND NOT STRENGTHEN THE CAR IN ANY WAY NOTHING ALLOWED BELOW THE BOTTOM BELL HOUSING BOLT OR THE SIDE BOTTOM BOLT ON TAIL SHAFT THIS CAN NOT EXTEND PAST TRANSMISSION MOUNT. OR YOU MAY USE A SKID PLATE THIS MAY ATTACH TO THE TRANS PAN AND OIL PAN NOTHING MAY EXTEND PAST THE REAR OF OIL PAN OR FORWARD OF THE SUMP AREA OF THE OIL PAN AND BE FLAT PLATE ONLY. IF YOU HAVE BRACING ON THE TOP OF TRANSMISSION NOTHING CAN BE BELOW BOTTOM BELL HOUSING BOLT OR THE SIDE BOTTOM BOLT ON TAIL SHAFT . OIL PAN AND TRANSMISSION PAN MAY BE PLATED THE PLATE USED MAY BE ONLY 1” WIDER THAN THE PAN THEY ARE WELDED TO. IF YOU USE A TRANSMISSION BRACE / PROTECTOR YOU MUST HAVE A FACTORY TRANSMISSION MOUNT BOLTED NOT WELDED TO CROSS MEMBER. THERE MUST BE A 2” GAP BETWEEN TRANS BRACE AND SKID PLATES AND THE CROSS MEMBER THIS INCLUDES SHIFTER PLATES.
6. ORIGINAL GAS TANK MUST BE REMOVED AND REPLACED WITH A BOAT-TYPE TANK OR FUEL CELL ONLY. MOVED INSIDE OF CAR BEHIND DRIVERS SEAT BUT NO FURTHER BACK THAN REAR AXLE NO RATCHET STRAPS MAY BE USED ON FUEL TANKS THEY MUST BE SECURELY FASTNED WITH BOLTS AND METAL STRAPS. NO STOCK TANKS INSIDE OF CAR BATTERIES MUST BE MOVED TO PASSENGER SIDE FLOOR BOARD AND SECURELY FASTENED.
7. YOU MAY RUN AN ELECTRIC FUEL PUMP BUT YOU MUST HAVE A ON AND OFF SWITCH CLEARLY MARKED.
8 ALL FUEL LINES MUST BE SECURE AND LEAK PROOF. ANY METHOD OF MOUNTING TANKS CAN IN NO WAY STRENGTHEN YOUR CAR.
9. ANY STOCK TYPE RADIATOR IS ALLOWED, AND MUST BE MOUNTED IN STOCK LOCATION. YOU MAY (FLOAT YOUR RADIATOR) USING 9 WIRE, BUNGEE STRAPS, OR ANYTHING OF THAT NATURE, MAXIMUM OF 3 SPOTS.
10. IF USING A STEEL FAN IT MUST BE A CLUTCH FAN AND COVERED WITH THE HOOD. PLASTIC SOLID FANS WILL BE ACCEPTABLE. ELECTRIC FANS ARE PERMITTED.
11. NO CHAINS TO ENGINE PERMITTED
12. NO WATER COOLERS PERMITTED OR OVERFLOW BOTTLES PERMITTED MUST BE FACTORY CAR RADIATOR OR AN OEM REPLACEMENT ONLY.


***** IF YOU HAMMER / SHAPE / WELD ON FRAME IN ANY MANNER NOT COVERED IN THE RULES YOU WILL NOT BE ABLE TO RUN THERE IS NO FIXING THIS****

[frankthetank]

DEC HEADERS COMPACT CAR RULES
GENERAL
******** YOU MUST PASS INSPECTION WITHIN 3 TIMES THROUGH INSPECTION OR YOU WILL NOT BE ALLOWED TO RUN ********
1. RWD CARS NO MORE THAN 106“ WHEELBASE FWD CARS NO MORE THAN 109“ WHEELBASE NO FULL FRAME CARS. IF CAR IS PAINTED BLACK A 12" X 12" ROOF SIGN IS MANDATORY.
2. HELMET, SEAT BELT, AND EYE PROTECTION MUST BE WORN AT ALL TIMES. ANY CONTROVERSIES OR PROTESTS MUST BE BROUGHT UP DURING THE DRIVERS MEETING.
3. ANY QUESTIONS CALL FIRST IF IT DOESN'T SAY YOU CAN, DON'T DO IT. CARS MUST BE STOCK UNLESS MODIFICATION IS STATED IN THE RULES. NO PAINTING OF THE FRAMES. A 12" X 12" ROOF SIGN IS RECOMMENDED. JUDGES DECISION'S ARE FINAL. ALL CARS ARE SUBJECT TO RE- INSPECTION AT ANY TIME BEFORE, DURING, OR AFTER THE EVENT NO REFUNDS ON ILLEGAL CARS. WE HAVE THE RIGHT TO RE-INSPECT, CUT, OR DRILL ANY CAR AT ANY TIME. IF YOU ARE CAUGHT BREAKING THE RULES SET HERE FORTH YOU WILL FORFIET ANY AND ALL WINNINGS AND OR PRIZES YOU ARE DUE.
4. ALL GLASS, PLASTIC, AND INTERIOR MUST BE REMOVED BEFORE ARRIVING TO THE EVENT. CARS MUST BE STOCK UNLESS MODIFICATIONS STATED IN RULES. WE HAVE THE RIGHT TO RE-INSPECT, DRILL, OR CUT ANY CAR AT ANY TIME. IF YOU STRETCH A RULE YOU WILL LOOSE THAT RULE.
5. ORIGINAL GAS TANK MAY BE REMOVED AND REPLACED WITH A BOAT-TYPE TANK OR FUEL CELL IF FUEL TANK IS IN FRONT OF REAR AXLE YOU MAY LEAVE IT IN STOCK LOCATION. MOVED INSIDE OF CAR BEHIND DRIVERS SEAT BUT NO FURTHER BACK THAN REAR AXLE. BATTERIES MUST BE MOVED TO PASSENGER SIDE FLOOR BOARD AND SECURELY FASTENED.

BODY / CAGE
1. DOORS MAY BE WELDED ALL THE WAY AROUND ON OUTSIDE OF BODY ONLY WITH ¼: X 3” WIDE STRAPPING NO EXCESSIVE OVERLAPPING OF STRAPPING IS PERMITTED.
2. DECK LIDS AND TAILGATES MAY BE WELDED WITH A 5” ON 5” OFF RULE USING ¼” X 3” WIDE PIECES OF STEEL OR 9 WIRED OR BANDING IN 8 SPOTS. DECK LIDS AND TAILGATES MUST BE IN ORIGINAL LOCATION DECK LIDS MAY BE FOLDED DOWN IN THE TRUNK, TRUNK LIDS MAY BE DIPPED ALONG WITH SPEAKER DECK. SPEAKER DECK CAN BE REMOVED, BUT TRUNK LID CAN ONLY BE WELDED TO QUARTER PANELS AND TAIL LIGHT ASSEMBLY ONLY NOTHING MAY BE WELDED INSIDE OF TRUNK. TWO ( 2 ) 8” X 8” INSPECTION HOLES MUST BE PUT IN ALL DECK LIDS WITHIN 2” OF TRUNK STRAPPING IN CENTER OF DECK LID FOR INSPECTION AND FIRE SAFETY. . DECK LIDS MUST BE FACTORY FOR MAKE AND MODEL OF CAR
3. HOOD MAY BE 9 WIRED IN 8 PLACES OR BOLTED IN 6 PLACES BOLTS MAY BE 5/8” IN DIA. FRONT 2 BODY MOUNTS MAY EXTEND THROUGH CORE SUPPORT AND USED AS FRONT 2 OF THE 6 HOOD BOLTS 1” ALL THREAD MAX YOU CAN NOT SLEEVE THE ALL THREAD WITH ANYTHING FROM BOTTOM OF CORE SUPPORT AND ABOVE. A 12” HOLE MINIMUM MUST BE IN THE HOOD.
3. NO BODY SEAM WELDING WILL BE PERMITTED. DOORS CAN BE WELDED ON OUTSIDE OF BODY ONLY. ON PRE-RAN CARS THE DOORS MAY BE REPAIRED BACK TO STOCK. RUST REPAIR IS LIMITED TO FLOOR BOARDS AND ROOFS ONLY.
4. YOU MAY HAVE A WINDOW BAR OR WIRE IN WINDSHIELD AND REAR WINDOW IF USING METAL IT CAN BE NO THICKER THAN 3/8" AND NO WIDER THAN 3" YOU MAY USE 2 X 2 PIPE. NOT SOLID. THESE MAY NOT TOUCH THE ROLLOVER BAR. THEY CAN BE WELDED TO ROOF NO MORE THAN 6" FROM THE WINDOW AREA. AND WELDED TO DECK LID NO MORE THAN 6"AT THE REAR WINDOW AREA METAL USED FOR THIS MAY NOT EXCEED 6" IN LENGTH ON ROOF OR DECK LID.
5. YOU MAY USE A FLOATING GAS TANK PROTECTOR THAT COMES OFF THE BACK BAR BUT IT CAN NOT BE WIDER THAN 24" THE GAS TANK PROTECTOR OR HOLDER MAY GO ALL THE WAY BACK TO THE SHEET METAL. IF THE PROTECTOR IS WIDER THAN 24" IT WILL NOT BE ALLOWED TO RUN. GAS TANK PROTECTOR / HOLDER CAN TOUCH REAR SHEET METAL BUT NO ATTACH TO IT
6. HOODS MUST BE OPEN FOR INSPECTION. (12" X 12" HOLE OVER CARBURETOR)
7. CARS MAY NOT BE SMASHED FLAT IF CARS ARE TUCKED THE REAR QUARTER PANELS MUST STAY AT THE FACTORY HEIGHT DECK LIDS MUST BE IN FACTORY LOCATION ( ABOVE RAIN CHANNELS)
8. YOU CAN ADD A PIECE OF ANGLE (4" X 4" X ¼"MAX.) TO TOP OF THE CORE SUPPORT BUT CAN BE NO LONGER THAN 1" WIDER THAN THE RADIATOR NO OTHER METAL PERMITTED ON CORE SUPPORT. NO OTHER METAL PERMITTED TO BE WELDED TO CORE SUPPORT.
9. YOU MAY HAVE A CAGE SURROUNDING THE DRIVERS COMPARTMENT WITH A ROLL OVER BAR. BARS 6" DIAM. MAX. MUST BE SHEET METAL TO SHEET METAL ONLY. THE DASH BAR MUST BE 5" FROM FIREWALL THIS WILL BE STRICTLY ENFORCED. THE BAR BEHIND THE SEAT CAN SIT NO FURTHER BACK THAN WHERE THE KICK PANEL MEETS THE BENCH SEAT AND MUST BE AT LEAST 6" OFF THE FLOOR. . NO CAGE COMPONENTS CAN BE FARTHER BACK THAN WHERE THE KICK PANEL MEETS THE BENCH SEAT. ROLL OVER BAR AND REAR DOWN LEGS ARE CAGE COMPONENTS. NO KICKERS PERMITTED

FRAME / BUMPERS
1. TRAILER HITCHES AND BRACES MUST BE REMOVED. NO PLATING, PINNING, HEAT TREATING, STUFFING THE FRAME OF ANY KIND. DO NOT PAINT FRAME. NO WELDS ON FRAME MAY EXCEED A SINGLE PASS NO WEAVE PASSES OR BUILDING THE WELD UP WILL BE PERMITIED.
2. NO FRAME CREASING OR HAMMERING PERMITTED. YOU CAN NOTCH OR CREASE REAR FRAME THIS IS TO HELP REAR OF CAR ROLL NOT TO STRENGTHEN THE FRAME. FRAME WELDING IS LIMITED TO FRONT AND REAR BUMPER AREAS. YOU MAY DO ONE OF THE FOLLOWING NOT BOTH 1 YOU CAN WELD 1 SEAM PER SIDE ON BODY FROM FIREWALL FORWARD OR 1 SEAM PER SIDE ON K MEMBER WITH NO METAL ADDED. FRONT FRAME MAY BE SHORTENED TO FRONT SIDE OF CORE SUPPORT. CORE SUPPORT MUST REMAIN IN STOCK LOCATION.
3. ANY YEAR BUMPER PERMITTED. ALL BUMPER SEAMS MAY BE WELDED, FRONT BUMPERS MAY BE LOADED BUMPER MUST BE A FACTORY CAR BUMPER ALL WORK TO BE DONE ON THE INSIDE OF THE BUMPER NO HOMEMADE BUMPERS DEC BUMPERS ARE PERMITTED. NO SPACERS OF ANY TYPE PERMITTED BETWEEN THE FRONT BUMPER AND THE FRAME. THE BUMPER ON THE REAR OF THE CAR MUST BE FACTORY NO ADDING OF METAL TO BUMPER ON REAR OF CAR WILL BE PERMITTED. OPENINGS IN BUMPER MAY BE CLOSED OUT. YOU MAY USE ¼" X 2” X 6” PLATE TO WELD FROM BUMPER TO FRAME 2 SIDES AND ONLY. BUMPER SHOCKS MAY BE 2” ROUND PIPE, 2” X 2” SQUARE TUBING OR FACTORY SHOCK, SHOCKS AND MAY NOT BE FURTHER THAN 10" INSIDE OF FRAME AND BE NO BIGGER THAN 2 INCHES IN DIA. YOU MAY WELD SHOCK TO FRAME FACTORY BUMPER SHOCKS CAN ONLY BE WELDED THE FIRST 10” FROM END OF FRAME AND MAY NOT BE MOVED BACK ON FRAME.
4. IF A FRAME SECTION NEEDS TO BE REPLACED OR REPAIRED (RUST) YOU MUST CALL FIRST. ON PRE-RAN CARS IF THE FRAME IS SHORTENED IN THE REAR AND BUMPER REPLACED THE BUMPER SHOCKS MAY NOT BE LOCATED CLOSER THAN 6" FROM HUMP PLATE.
5. NO FIX IT PLATES PERMITTED
6. ANGLES FOR CROSS MEMBER CAN'T BE LONGER THAN 5" AND MUST BE WITHIN 12" FROM FACTORY LOCATION.
7. CARS MUST SET RELATIVELY LEVEL.
8. FOR COIL SPRUNG CARS YOU MAY USE A HUMP PLATE THEY MAY BE ¼" X 6" X 16" CENTERED IN THE HUMP THEY WILL BE MEASURED FROM THE TOP CENTER OF THE HUMP AND MUST START NO LOWER THAN THE CENTER OF THE FRAME. HUMP PLATE MUST BE AT LEAST 2" FROM REAR END HOUSING. ON LEAF SPRING CARS YOU MAY USE A ¼" X 6" X 10" HUMP PLATE TO BE MEASURED THE SAME WAY. THESE HUMP PLATES MAY CONTOUR THE FRAME OR RUN STRAIGHT ACROSS HUMP. HUMP PLATE MUST REMAIN FLAT PLATE NO BENDING OF THIS OVER THE TOP OR BOTTOM OF FRAME.
9. YOU MAY CLIP PRE-RAN CARS WITH A SINGLE BUTT WELD WITH NO METAL ADDED MUST USE SAME MAKE AND MODEL OF FRAME ALL FACTORY HOLES IN FRAME MUST REMAIN OPEN NO WELDING THESE HOLES SHUT PERMITTED.
10. K MEMBERS CAN NOT BE WELDED TO BODY OF CAR THEY MAY BE BOLTED SOLID

ENGINE / TRANSMISSION
1. NO CHAINS ON ENGINE PERMITTED SOLID OR AFTERMARKET MOUNTS ARE OK
2. 4 & 6 CYL. ENGINES ONLY. DISTRIBUTOR PROTECTORS ARE ALLOWED, NOTHING THAT ATTACHES TO ENGINE CAN BE WIDER THAN THE STACKS I.E DIST. PROTECTOR, ENGINE CRADLES ECT OR BE USED TO STRENGTHEN CARS.
3. OIL PAN AND TRANSMISSION PAN MAY BE PLATED THE PLATE USED MAY BE ONLY 1” WIDER THAN THE PAN THEY ARE WELDED TO THEY MAY NOT CONNECT IN ANY WAY.
4. NO STEEL BELL HOUSINGS OR TRANSMISSION BRACES ALLOWED

SUSPENSION
1. YOU MAY MODIFY TIE RODS. VALVE STEM PROTECTORS ARE PERMITTED. A-ARMS MUST REMAIN IN STOCK CONFIGURATION. ANY TIRE PERMITTED. REAR TRAILING ARMS MAY BE HOME MADE NO BIGGER THAN 2 X 2 SQUARE TUBING OR PIPE.
2.UPPER A ARMS MAY BE WELDED DOWN WITH A ¼" X 2" X 2" PIECE OF STEEL ON FRONT AND BACK SIDE OF UPPER A ARM AND YOU MAY PLUG WELD THE CENTER OF THE A ARM. LOWER A-ARMS MAY NOT BE WELDED. CARS DO NOT HAVE TO BOUNCE. SOLID SUSPENSION IS ALLOWED. COIL SPRINGS IN REAR MAY BE WELDED WIRED OR CHAINED TO REAR END.
3. REAR END PROTECTORS MAY BE USED BUT MAY NOT BE USED TO STRENGTHEN CAR IN ANY WAY. LEAF SPRING CARS MAY REPLACE BROKEN SPRINGS WITH FACTORY ¼ " LEAF SPRINGS ONLY. NO MORE THAN 5 SPRINGS ALLOWED AND MUST HAVE A 2" STAGGER AND MOUNTED IN FACTORY LOCATION YOU CAN NOT CHANGE COIL SPRING TO LEAF SPRING SET UPS.
4. IDLER ARM MUST BE BOLTED FACTORY TO FRAME NO BOLTS WILL BE PERMITTED ALL THE WAY THROUGH THE FRAME. SWAY BAR MAY BE WELDED TO BOTTOM OF FRAME IN THE FACTORY LOCATION YOU MAY USE A 1 ½ " X 4” BRACKET OR A 2" SQUARE TUBING OR PIPE TO WELD TO SWAY BAR TO ATTACH TO FRAME.
5. ON FRONT WHEEL DRIVE CARS YOU MAY REINFORCE THE REAR AXLE ASSEMBLY WITH 2” X 2” SQUARE TUBING, 2” ANGLE OR 2” WIDE FLAT PLATE THIS MAY NOT IN ANY WAY REINFORCE THE BODY OF THE CAR


80 & NEWER WIRE CLASS
1. Any American-made sedan or station wagon 1980 AND NEWER
2. Helmet, seat belt, and eye protection must be worn at all times. Long sleeves and Long pants required.
3. Any controversies or protests must be brought up during the drivers meeting.
4. Any questions call first. If it doesn't say you can don't do it. Cars must be stock. No painting of the frames. If the car is black it must have a 12" x 12" roof sign.
5. Judges decision's are final. All cars are subject to re-inspection at any time before, during, or after the event.
6. All glass, plastic, and interior must be removed before arriving to the event.
7. Any car motor of choice is permitted. NO KICKERS. MUST USE STOCK FRAME MOUNTS. Can have ONE chain per side, going down TWO length welded 3/8 chain to cradle under engine not the frame.
8. Trailer hitches and braces must be removed.
9. A 14" x 14" inspection hole must be put in all deck lids. Deck lids MUST be in original position. NO WEDGING. Some body creasing is ok. Drivers Door may be welded solid outside seam only. All other doors must be wired shut.
10. Original gas tank must be removed and replaced with a boat-type tank or fuel cell. Moved inside of car behind driver's seat but no further back than rear axle. Batteries must be moved to passenger side floor board and securely fastened These must be covered with A rubber or non flammable material .
11. No interior seam welding will be permitted. Repairing sheet metal is limited to where the battery box and gas tank and drivers area of the floor boards of the car.
12. NO FRAME WELDING. You may weld the bumper and bumper shock there must be at least a 1“ gap between bumper and frame if using a factory bumper shock. Bumper may be welded directly to frame but the bumper shock must be removed completely. No adding metal. .Bumper swaps ok must be factory car bumper No tilting OR COLD BENDING of frames will be permitted. 1980 AND NEWER BUMPERS ONLY
13. Hood- wire ONLY. 8 double strand of #9 wire 2 may go around bumper and or frame. Hoods must be open for inspection. (12" x 12" hole over carburetor). Deck lids may be wired same way no welding permitted.
14. Angles for cross member can't be longer than 5" and must be within 12" from factory location.
15. Tie Rods MAY BE REINFORCED No gas tank protectors.
16. Factory body bolts may be changed to ½” bolts you must use factory rubber and bushing spacer and there must be a 1 “ gap between body and frame. You may have a bar in the dash area and a bar behind the seat with bars connecting the dash and rear bar on each side. Side bars must be inside of car not inside of doors. Roll over bar is permitted No down legs permitted no gussets permitted. No bigger than 4” in diameter bars and you can use a ¼” X 6” X 6” plate to attach bars to the sheet metal MUST HAVE A 5" SPACE FROM DASH BAR TO FIREWALL
17. Rear coil springs may be wired or chained. No solid suspensions. All suspension components must remain factory stock. No modifications will be permitted. Cars must bounce.
18. Front coil springs must remain stock. You can use screw-in spacers. Leaf spring cars must remain factory springs. NO EXCEPTIONS! You cannot change coil spring to leaf spring set ups.
19. Car must set level bumpers can not be higher than 18” to bottom of bumper
20. Any stock 5 bolt rear end permitted. Must use STOCK trailing arms.
21. Cars must be stock.
22. WE HAVE THE RIGHT TO RE-INSPECT, CUT, OR DRILL ANY CAR AT ANY TIME. IF YOU ARE CAUGHT BREAKING THE RULES SET HERE FORTH YOU WILL FORFIET ANY AND ALL WINNINGS AND OR PRIZES YOU ARE DUE. . NO REFUNDS ON ILLEAGLE CARS.
23. NO OTHER MODIFICATIONS MAY BE MADE TO CAR UNLESS THEY ARE STATED IN THE RULES ABOVE IF YOU STRETCH A RULE YOU WILL LOSE THAT RULE.NO WELDS ON FRAME!


FULL SIZE TRUCK AND MINI TRUCKS RULES

1. Any American made pick up, suburban and blazer type vehicles permitted.
2. Factory fuel tanks must be removed.
3. You may run engine of choice. No kickers to distributor protector.
4. Fuel tanks must be located in the bed of the trucks in the in the center of the bed directly behind cab. No stock fuel tanks permitted. Fuel cells must be securely fastened and covered.
5. Battery may be moved to front floor of cab. Battery must be securely fastened to floor and covered.
6. All trucks must have seat belts.
7. Doors must be secured by wire, chain, or welded shut no loose doors permitted.
8. Tail gates may be welded shut they may be welded to the bumper on the rear of the truck. Bed seams where the bed sides meet floor may be welded Inside of bed only no metal may be added.
9. Box and cab mounts may be replaced with up to 1” bolts body mounts may be removed. The body bolts may go all the way through the fame and floor of truck.
10. No trailer hitches or reinforcements of frame or body of any kind permitted. May use car bumpers for mounting of car bumpers you may use factory bumper shocks and brackets or a 3” X 3” X 5” long box steel or like wise material.
11. Hoods must be in place and operable must have a 12” X 12” hole cut in hood over carburetor
12. Hoods may be wired or bolted shut only 8 double strands of wire permitted all can go to frame or bumper see full-size rules.
13. No 4 wheel drives permitted 4 wheel drives must have front drive shaft removed.
14. Tires MUST be D.O.T. TIRE sizes for trucks no split rims. NO TRACTOR TREADS, IMPLIMENT TIRES OR OTHER OFF ROAD TIRES WIL BE PERMITTED
15. Beds must be welded to cab of trucks with a 3” strap directly behind doors.
16. 8 double strands of wire permitted on front and rear of truck all permitted to go to frame
17. Suspension may be solid.
18. A 4 point cage is highly recommended in drivers compartment for drivers safety. The cage in the cab may have 4 down legs from front and rear bar straight down to the top of frame. Also a gas tank protector is highly recommended. Protector may attach to frame but may not extend further than 24” from the front of the bed.
19. Trucks must set level no pulling down rear of the truck. No smashing of the bed sides will be permitted. You must use factory springs for make and model of truck. You may use all thread for shocks.
20. On trucks with out front leaf springs you can have kickers from the dash bar to frame behind A Arms 2" X 2" square tubing or 2" pipe only 1 per side.




STREET STOCK RULES 1980 & NEWER CARS ONLY

1. Must be 100% stock !! No cross breeding entire drive must be same make as car ( chevy to chevy ford to ford and so on) Must appear to be factory engine to car with stock exhaust.
2. Engine must be mounted with stock mounts in stock position. No welding of mounts bolted only. No homemade cross members, cross members must be stock and bolted in not welded
3. Doors must be chained or wired. No more than 6 places.
4. Trunks must be chained or wired. No more than 4 places. TRUNKS MUST BE OPEN DURING INSPECTION! Car must have deck lid and or tailgate No welding or adding metal. Trunk lid must be in stock location. No tucking, wedging, pre bending, smashing, folding or anything else you can think of. No welding washers for holes.
5. Hoods may be wired or chained in 4 spots. X chain or 2 strands per hole. It must be sheet metal to sheet metal only. No welding washers for holes. Must be 12" hole in hood in case of fire. Remove hood latch!!! Hood must be open for inspection.
6. .ANY TIRE PERMITTED DOUBLES PERMITTED, no foam filled tires no valve stem protectors
7. You may leave stock gas tank in stock location or you may relocate the fuel tank to rear floor of car if this is done you must use a fuel cell or boat tank no stock fuel tanks permitted inside of car. Must only have 3 gallons of gas. You may be asked to drain it if the gauge doesn't work.
8. Windshield may be left in car OR you can remove windshield!
9. The following must be removed prior to entering the fairgrounds, windows , headlights, taillights, all chrome and mirrors. Interior must be swept clean of debris and glass.
10. Stock type springs and shocks. No solid suspension. SCREW IN TYPE spring risers ARE OK, NO wire, chains or any weld on rear ends or rear spring pockets. Cars must bounce & cars must be STOCK!!!!!
11. YOU MAY WELD SPIDER GEARS IN REAR END TO MAKE IT POSI. NO GEARS PERMITTED
12 Paint front doors in contrasting paint. Example if the car is black paint doors white
13. Do not strip under the hood. Battery MAY be LEFT in stock location. But you may put rubber mat over it or spray with foam around it not excessively. Do not spray foam on anything else. YOU MAY MOVE THE BATTERY TO THE FLOOR OF THE CAR YOU MAY LENGTHEN CABLES TO THE REACH BATTERY ON FLOOR NOT THE WIREING HARNESS THIS WILL BE STRICKLY ENFORCED
14. YOU MAY USE AN 80 & NEWER BUMPER ON CAR THEY MUST BOLT ON IN FACTORY LOCATION AND MANNER YOU MAY WELD WITH 4 1” WELDS ON THE SHOCK PLATE TO BUMPER DEC BUMPERS ARE PERMITTED ENDS MUST REMAIN OPEN NO METAL ADDED TO BUMPER PERMITTED
15. Read all rules carefully and follow them! It will be a cheap easy build. Any questions call! There will be no stretching or bending of any rules or you will either run in the modified class or go home.

[frankthetank]

JOKERS OLD SCHOOL WIRE CLASS
1. Any American-made sedan or station wagon No imperials
2. Helmet, seat belt, and eye protection must be worn at all times. Long sleeves and Long pants required.
3. Any controversies or protests must be brought up during the drivers meeting.
4. Any questions call first. If it doesn't say you can don't do it. Cars must be stock. No painting of the frames. If the car is black it must have a 12" x 12" roof sign.
5. Judges decision's are final. All cars are subject to re-inspection at any time before, during, or after the event.
6. All glass, plastic, and interior must be removed before arriving to the event.
7. Any car motor of choice is permitted. NO DISTRIBUTOR PROTECTORS. NO ENGINE CRADELS. NO MOTOR PROTECTORS OF ANY KIND. NO KICKERS. MUST USE STOCK MOUNTS. Can have ONE chain per side, going down TWO length welded 3/8 chain to cradle under engine not the frame.
8. Hood- wire ONLY. 8 double strand of #9 wire 2 may go around bumper and or frame. Hoods must be open for inspection. (12" x 12" hole over carburetor). Deck lids may be wired same way no welding permitted. A 14" x 14" inspection hole must be put in all deck lids. Deck lids MUST be in original position. NO WEDGING. NO BODY CREASING PERMITTED. All doors must be wired shut.
9. No interior seam welding will be permitted. Some rust repair is permitted do not go overboard.
10. Rear coil springs may be wired or chained. No solid suspensions. All suspension components must remain factory stock. No modifications will be permitted. Cars must bounce.
11. Front coil springs must remain stock. You can use screw-in spacers. Leaf spring cars must remain factory springs. NO EXCEPTIONS! You cannot change coil spring to leaf spring set ups.
12. Car must set level bumpers can not be higher than 18” to bottom of bumper
13. Any stock 5 bolt rear end permitted. No rear end protectors. NO SLIDER SHAFTS Must use STOCK trailing arms.
14. Tie Rods MAY BE REINFORCED No gas tank protectors.
15. Factory body bolts may be changed to ½” bolts you must use factory rubber and bushing spacer or there must be a 1 “ gap between body and frame.
16. You may have a bar in the dash area and a bar behind the seat with bars connecting the dash and rear bar on each side. Side bars must be inside of car not inside of doors. Roll over bar is permitted No down legs permitted no gussets permitted. No bigger than 4” in diameter bars and you can use a ¼” X 6” X 6” plate to attach bars to the sheet metal MUST HAVE A 5" SPACE FROM DASH BAR TO FIREWALL

17. Angles for cross member can't be longer than 5" and must be within 12" from factory location.
18. NO FRAME WELDING. You may weld the bumper to the bumper shock there must be at least a 1“ gap between bumper and frame Must use the factory bumper shock for car you are running. No hard nosing of bumper permitted. Any factory car bumper will be permitted no loading or plating of bumper permitted. No tilting OR COLD BENDING of frames will be permitted NO WELDING TO FRAME IS PERMITTED
19. Trailer hitches and braces must be removed.
20. Original gas tank must be removed and replaced with a boat-type tank or fuel cell. Moved inside of car behind driver's seat but no further back than rear axle. Batteries must be moved to passenger side floor board and securely fastened.
21. Only aftermarket parts that are permitted is a shifter, stacks, Tie rods, and steering column. NO SLIDER SHAFTS
22 Doubled tires permitted weld in centers are ok no rim guards or protectors of any kind.
23. WE HAVE THE RIGHT TO RE-INSPECT, CUT, OR DRILL ANY CAR AT ANY TIME. IF YOU ARE CAUGHT BREAKING THE RULES SET HERE FORTH YOU WILL FORFIET ANY AND ALL WINNINGS AND OR PRIZES YOU ARE DUE. .
24. NO OTHER MODIFICATIONS MAY BE MADE TO CAR UNLESS THEY ARE STATED IN THE RULES ABOVE IF YOU STRETCH A RULE YOU WILL LOSE THAT RULE.NO WELDS ON FRAME!


YOUTH RULES

This class is for the kids AGES 12-16 W/0 DRIVERS LICENSE let them learn how to strip cars out, build a car to the rules and be a good sport when they win or lose. Upon arrival a notarized parental consent form must be filled out or you will not be allowed to participate. One parent must be present with valid I.D. A notary will be present to notarize the entry forms. A PARENT OR ADULT MUST RIDE WITH THE DRIVER. this is for instructional purposes as well as a possible emergency situation .

BUILDING** all cars must remain stock unless specified in these rules all cars must be factory front wheel drive 4 or 6 cylinder and wheelbase must not exceed 113"
strip interior100%! u can leave in passenger seat, dash , KEY START RECOMMENDED completely remove airbags and power charge!

WELDING** One bar behind seat 12 x 12 inner door plates and No larger than 6" dia. pipe. A roll over bar strongly advised. You may have a 4 point cage for driver and pass. safety. reinforcing the drivers door and passenger door highly recommended.

DOORS MAY BE WELDED outside only 3"wide x1/4 thick strapping.......... both outside front doors can be reinforced 6 inches past the door seams. so do it!

Trunk / tailgate may be welded in a 5” on 5” off pattern with 3” wide strapping deck lids must remain in factory location NO TUCKING/WEDGING

Hood to be fastened shut with bolts in 6 places or 9 wire in 8 places sheet metal to sheet metal only

BUMPERS** Any year factory automobile bumper allowed NO LOADED, 74-76 CHEVY, OR CHRYSLER POINTY BUMPERS PERMITTED. You can hard nose the front bumper You may use a 2” X 6” X ¼” plate to weld bumper the frame 2 per side. BUMPER SHOCKS MAY BE 2” ROUND PIPE, 2” X 2” SQUARE TUBING OR FACTORY SHOCK, SHOCKS AND MAY NOT BE FURTHER THAN 6" INSIDE OF FRAME AND BE NO BIGGER THAN 2 INCHES IN DIA. YOU MAY WELD SHOCK TO FRAME FACTORY BUMPER SHOCKS CAN ONLY BE WELDED THE FIRST 6” FROM END OF FRAME AND MAY NOT BE MOVED BACK ON FRAME

TIRES** No studded tires on the front. You can glue, screw, double and stem protection is allowed. remove wheel weights any tire permitted.

WINDSHIELD and rear window ** Must be removed. Must have 2 places of #9 wire, banding, strapping 3/8” X 3” flat stock or chain in windshield and rear window area to protect driver/pass. Mount this from roof to the cowl or deck lid panel. It must not be attached to the hood

BATTERY** Must be mounted inside the car , all parts of battery must be covered with a non flammable material.

Fuel Tanks***This is the most important rule to read. Any fuel system I feel that’s unsafe will not pass. Stock fuel tanks can be left in if they are mounted in front of rear axle. I don’t want to see a stock tank mounted in your back seat area. Tanks must be made of steel a 4 point hold down bolted to floor with a minimum of a 2" washer on the underside of car. All hoses must be double clamped at all connections. Electric fuel pumps must be operated by a switch that the passenger can shut off in case of a fire. I'll paint switch during inspection. Stock systems will simply use the key.

5' FULL SIZE CLASS
BATTERY AND FUEL TANK MUST BE FASTENED SECURELY AND IN A SAFE MANNER
MUST RESEMBLE A CAR FROM 5' AWAY

[frankthetank]

STOCK MOWER RULES

*. DRIVER MUST HAVE LONG-SLEEVE SHIRT, AND PANTS HELMET MUST BE WORN AT ALL TIMES MUST HAVE SOME SORT OF EYE PROTECTION ON.

1. THE GARDEN OR LAWN MOWER MUST HAVE A FACTORY FRAME, NO HOMEMADE FRAMES. MAX 19 H.P. ENGINE BELT DRIVEN AIR COOLED
2. MUST BE A FRONT ENGINE MOWER NO REAR ENGINES ALLOWED. ALL MOWERS MUST HAVE FACTORY STOCK ENGINES
3. REINFORCING THE FRAME IS PERMITTED. TRANSAXLES MUST BE FACTORY, REINFORCING OR SPIDER GEARS IS ALLOWED REINFORCING AROUND THE ENGINE IS ALLOWED BUT CAN'T BE OUTSIDE OF THE HOOD
4. HOODS MUST REMAIN FACTORY, HOODS CAN BE SCREWED DOWN OR WELDED, IF HOOD IS FIBERGLASS, YOU CAN MAKE A HOOD FROM SHEET METAL BUT IT IS NOT ALLOWED TO BE ANY BIGGER THAN THE FIBER GLASS HOOD WAS.
5. BRAKES MUST BE IN OPERATION WHEN PULLING IN FOR THE HEAT RACE, MUST ALSO HAVE FORWARD AND REVERSE
6. GAS TANK MUST BE FASTENED WITH THE CAP ON, IF IT COMES LOOSE OR GAS LEAKS YOU WILL BE DISQUALIFIED
7. SOME SORT OF LEG GUARD IS MANDATORY BEFORE ENTERING ARENA, MUST GO FROM REAR FENDER TO FRONT FOOT REST OR FRAME
8. A REAR BUMPER IS ALLOWED BUT CAN'T EXTEND MORE THAN FOUR INCHES OUT FROM REAR OF MOWER NOT THE TIRES. THE BUMPER MUST BE NO BIGGER THAN 3 INCHES WIDE AND CAN NOT EXTEND PAST THE TIRE. REAR BUMPER MUST BE ATLEAST 6 INCHES FROM THE GROUND
9. PULLEYS CAN BE CHANGED TO INCREASE SPEED. DRIVETRAIN MODIFICATIONS ARE ALLOWED BUT MUST STAY BELT DRIVEN WHEELS MUST BE OF LAWNMOWER TYPE, NO DUAL WHEELS, TRACTOR TREAD AND CUT TIRES ARE ALLOWED TIRES MUST BE LAWN MOWER TYPE.
10. MOWER DECKS MUST BE REMOVED BEFORE ENTRANCE TO PIT AREA, PLUS ALL HEADLIGHTS AND ANY OTHER PLASTICS MUST BE REMOVED.
11 BATTERY CAN BE USED TO START THE MOWER, BUT THEN MUST BE TAKEN OUT BEFORE ENTERING ARENA. IF MOWER IS PULL START YOU WILL NOT BE ALLOWED TO USE IT ONCE YOU ENTER ARENA. ABSOLUTELY NO BATTERIES FOR ANY REASON CAN REMAIN IN MOWER. IF YOUR MOWER REQUIRES A BATTERY YOU CANNOT RUN IT. MAXIMUM ½ GALLON OF FUEL
12 THE FRONT OF THE FRAME UNDER GRILL MAY BE STRENGTHENED FOR HITTING BUT MUST BE A SMOOTH FINISH. FRONT BUMPER CANNOT COVER FRONT TIRES MAXIMUM 6 INCHES TALL, MUST BE 6 INCHES OFF THE GROUND, 2 INCHES FROM FRONT FRAME OF MOWER, BUMPER MUST BE FLAT NO POINTS OR SHARP EDGES. NO BRACING AT ANYTIME MAY COVER FRONT TIRES- INCLUDING LEG GUARDS.
13 IF A DRIVER ROLLS OVER HE OR SHE IS DISQUALIFIED, IF ANY PART OF YOUR BODY TOUCHES THE GROUND YOU WILL BE DISQUALIFIED ALSO.
14 IN THE EVENT OF A ROLL-OVER THE EVENT WILL BE STOPPED UNTIL THE OFFICIALS GET THE MOWER BACK UP RIGHT.
15 NUMBER MUST BE SOMEWHERE ON EACH SIDE OF THE MOWER, NUMBER MAY BE ON HELMET ALSO.
16 NO WHEEL WEIGHTS ON ANYTIME. NO HEAVY MODIFICATIONS OTHER THAN WHAT IS STATED IN THESE RULES WILL BE PERMITTED MOWER MUST RESEMBLE A FACTORY MOWER
17 ALL OF THE RULES AS FAS AS WHEN YOU ARE IN THE ARENA WILL BE EXPLAINED AT THE DRIVERS MEETING. IF MOWER DOESN'T PASS INSPECTION OR PARTICIPANT REFUSES TO FIX SOMETHING, THERE WILL BE NO REFUNDS.
18 OFFICIALS HAVE FINAL SAY, WE RESERVE THE RIGHT TO CHECK MOWER AFTER
THE DERBY
19 THE FRONT AND REAR PULLEYS CAN HAVE NO MORE THAN A 3” DIFFERANCE IN SIZE FROM OME ANOTHER ( ie IF FRONT IS 6" REAR CAN BE BETWEEN 3" AND 9" AND VICE VERSA )

[frankthetank]

[frankthetank]

[frankthetank]

I WILL HAVE THE RUNNING ORDER POSTED SOON

[Honey Badger315]

You want to make things even you should make all compacts 109 wheelbase. Not 106 for rwd and 109 for fwd. your allowing luminas which can compete with full size weld classes run with true compacts.

[fatpat51]

Oct 18, 2015 13:47:15 GMT -5 Honey Badger315 said:

You want to make things even you should make all compacts 109 wheelbase. Not 106 for rwd and 109 for fwd. your allowing luminas which can compete with full size weld classes run with true compacts.

Sounds like a good reason to run a lumina

[ZTR09]

Is it gonna be mod or fair stock rules for the mowers don't look like there was any changes to the rules

[CHUNKY MONKEY 13]

Oct 18, 2015 14:24:34 GMT -5 fatpat51 said:

Oct 18, 2015 13:47:15 GMT -5 Honey Badger315 said:

You want to make things even you should make all compacts 109 wheelbase. Not 106 for rwd and 109 for fwd. your allowing luminas which can compete with full size weld classes run with true compacts.

Sounds like a good reason to run a lumina

No it sounds like another boring class with 80 black cookie cutter cars. Lol

[JoJo Davis]

TBTC rules look great...see you guys there in a few short months!!!