|
Post by debydriver8s on May 23, 2016 10:22:54 GMT -5
Any advice on where I can put the computer so it not getting crushed when I get hit or something I can put over it so it don't break Move it near the fire wall area or strut tower if u can find room
|
|
|
Post by hoosierwebb on May 29, 2016 20:20:14 GMT -5
I built a set of headers on my 2.4L ran it about 5 min. I shut it off and started it about 3 times and it was fine tried to start it the next day and all it wants to so is crank over. Could the headers have anything to do with it? Did you put an o2 sensor back into your exhaust? No I did not put one in but I plan on it. I found my problem and my fuses keep coming loose in the fuse panel.
|
|
|
Post by hoosierwebb on May 29, 2016 20:21:09 GMT -5
Any advice on where I can put the computer so it not getting crushed when I get hit or something I can put over it so it don't break Move it near the fire wall area or strut tower if u can find room Put it inside the cab.
|
|
|
Post by debydriver8s on Jun 2, 2016 22:04:13 GMT -5
Im not used to FWD fuel injected contacts is there an inertia switch on these cars I have tried to look but haven't found one yet.
|
|
|
Post by C4 on Jun 2, 2016 22:39:27 GMT -5
Im not used to FWD fuel injected contacts is there an inertia switch on these cars I have tried to look but haven't found one yet. Mostly a Ford special there.
|
|
|
Post by debydriver8s on Jun 3, 2016 9:50:02 GMT -5
Thanks c4 wasn't sure like I said new to these kind of cars I try to stay away from anything with a computer if I can help it lol
|
|
|
Post by debydriver8s on Jun 11, 2016 12:54:31 GMT -5
Ran mine last night held up better than expected only thing I would say is if you can reinforce the radeator support do so. I got taken out with a hit to the passenger side front of the radeator support cleared my bumper and folded it over into the plastic intake and shattered it. Other than that best FWD I have ever ran least as far as stock shows go will be on the hunt for more for sure gotta make a stock pile. Theses things are fun and easy to build for whatever the rules are
|
|
|
Post by tunnelvisionracing on Jun 12, 2016 0:55:28 GMT -5
we lost a spindle on ours stock.added a piece of metal and it did great on mod night....got lucky when the foxbody got his rear end destroyed.flag car is the stratus m.youtube.com/watch?v=tlY6kZo_cDU
|
|
|
Post by hoosierwebb on Jun 14, 2016 9:50:44 GMT -5
Ran mine last night held up better than expected only thing I would say is if you can reinforce the radeator support do so. I got taken out with a hit to the passenger side front of the radeator support cleared my bumper and folded it over into the plastic intake and shattered it. Other than that best FWD I have ever ran least as far as stock shows go will be on the hunt for more for sure gotta make a stock pile. Theses things are fun and easy to build for whatever the rules are Did you run the stock bumper on front? If so how did it hold up?
|
|
|
Post by debydriver8s on Jun 14, 2016 13:50:59 GMT -5
Ran mine last night held up better than expected only thing I would say is if you can reinforce the radeator support do so. I got taken out with a hit to the passenger side front of the radeator support cleared my bumper and folded it over into the plastic intake and shattered it. Other than that best FWD I have ever ran least as far as stock shows go will be on the hunt for more for sure gotta make a stock pile. Theses things are fun and easy to build for whatever the rules are Did you run the stock bumper on front? If so how did it hold up? Held up perfect only one small dent and made some good hits with it they hold up well in my opinion.
|
|
|
Post by hoosierwebb on Jun 14, 2016 15:39:38 GMT -5
Did you run the stock bumper on front? If so how did it hold up? Held up perfect only one small dent and made some good hits with it they hold up well in my opinion. I ask because I have a stock bumper off a 2001 Taurus and wasn't sure if I wanted to swap them or not.
|
|
|
Post by debydriver8s on Jun 14, 2016 20:48:25 GMT -5
Held up perfect only one small dent and made some good hits with it they hold up well in my opinion. I ask because I have a stock bumper off a 2001 Taurus and wasn't sure if I wanted to swap them or not. Unless u can swap to a loaded bumper I'd just run the stock one
|
|
|
Post by debydriver8s on Jun 18, 2016 22:32:28 GMT -5
Is there any other cars that have the same intake or is there away to carb a 4 banger for these cara
|
|
|
Post by hoosierwebb on Jun 20, 2016 9:43:10 GMT -5
Is there any other cars that have the same intake or is there away to carb a 4 banger for these cara I've been looking at the intakes for a PT Cruiser I believe they have the same flange and they wrap over top of the head of the motor.
|
|
|
Post by debydriver8s on Jun 20, 2016 11:05:06 GMT -5
Is there any other cars that have the same intake or is there away to carb a 4 banger for these cara I've been looking at the intakes for a PT Cruiser I believe they have the same flange and they wrap over top of the head of the motor. I'll have to check into that
|
|