|
Post by zfadely04 on Jul 22, 2020 19:51:56 GMT -5
Looking for a complete wiring drawing or what not for a carb conversion on a 3100. Did it last year but forget how I did it
|
|
|
Post by fallinskiestwice on Jul 23, 2020 7:01:45 GMT -5
Page 1
|
|
k75
Future Icon
Posts: 7
|
Post by k75 on Jul 23, 2020 11:50:59 GMT -5
Hey guys Iโm kinda of in a time crunch and I donโt have time to read through all 200 pages could someone tell me how to hot wire injectors
|
|
|
Post by wagner23 on Jul 26, 2020 17:14:19 GMT -5
Building a 98 Chevy lumina 3100 not carbed. What wires do I need to run to my ignition switch? Thanks!
|
|
|
Post by jbsmashtyme on Sept 23, 2020 18:05:58 GMT -5
Got a 97 Lumina and water is getting in the oil. Its for a bone stock show and already built. Is it best to drain all the water and oil, add new oil and run it with no water?
|
|
|
Post by C4 on Sept 24, 2020 0:16:03 GMT -5
Got a 97 Lumina and water is getting in the oil. Its for a bone stock show and already built. Is it best to drain all the water and oil, add new oil and run it with no water? Spend a couple hours on intake gaskets.
|
|
|
Post by hondo88h on Sept 26, 2020 21:12:57 GMT -5
Who was making the metal ac/ps by pass pulleys for the 3100. Was it baldwin? I'm in need of new set up, I was using a plastic one from a scrap car and had it bolted up just right below the intake. Well on my last run I had a strut tower collapse in and crack it. So I'm kinda looking to switch to a metal one I make steel a/c pulley bypass kits.
|
|
|
Post by hondo88h on Sept 26, 2020 21:14:17 GMT -5
Is anyone buying 3100/3400 wiring harnesses to make simplified harnesses. I have 13 complete harnesses and 2 harnesses that are hacked up. If anyone needs a harness or knows someone that would buy them let me know. I also might be interested in your harnesses and ecms if you have them as well. Message me on fb or text me 3304470901. Not on here much
|
|
|
Post by jayjay1985 on Dec 2, 2020 13:23:26 GMT -5
Does anyone have an ECM and PCM pin out that they could send me for an 03 century 3.1?
|
|
|
Post by kkilla1991 on Jan 10, 2021 7:30:33 GMT -5
I just recently bought a 96 Oldsmobile Ciera. Has the 3100 v6 in it! Any tips or tricks to help me out would be awesome. I run camrys and don't know much about these so anything will help.
|
|
|
Post by Junkyarddog84 on Jan 12, 2021 11:17:09 GMT -5
Yep...Lots of Help starting on Pg 1 and so on ๐๐
|
|
xxxl
Future Icon
Posts: 15
|
Post by xxxl on Feb 7, 2021 13:24:55 GMT -5
I've read through and done see much about it. 92 lumina with the 3.1 what is the sensor on the back of the block right beside the cps. 5 wires going to it. What is this sensor and is it needed. Car is a gut n go and I cannot carb it. The wires have been cut. Car will start sometimes and sometimes it won't. I'm starting to believe this is the issue. Before I spend anymore time splicing wires I thought I just ask. Thanks in advance.
|
|
|
Post by taterjuice on Feb 7, 2021 20:14:00 GMT -5
I've read through and done see much about it. 92 lumina with the 3.1 what is the sensor on the back of the block right beside the cps. 5 wires going to it. What is this sensor and is it needed. Car is a gut n go and I cannot carb it. The wires have been cut. Car will start sometimes and sometimes it won't. I'm starting to believe this is the issue. Before I spend anymore time splicing wires I thought I just ask. Thanks in advance. Cps ?
|
|
xxxl
Future Icon
Posts: 15
|
Post by xxxl on Feb 9, 2021 10:13:31 GMT -5
Figured it out. It's just a knock sensor. Thanks tater
|
|
chi
Heat Winner
Posts: 229
|
Post by chi on Mar 22, 2021 9:37:56 GMT -5
Just picked up a 04 impala with the 3.4 in it. Is there any difference in the engine harness between the 3100 and 3.4? Could I do a head swap or would I need to swap the whole thing?
|
|