|
Post by hitman on Apr 16, 2014 13:26:52 GMT -5
im in search of a small block Chrysler engine cradle to put my Chrysler engines in cars I have a robo cradle for my chevy engine that works great would like something like it for my Chrysler engine any ideas? ?
|
|
hemi1
Feature Winner
Posts: 2,425
|
Post by hemi1 on Apr 16, 2014 13:35:37 GMT -5
M1 or hoffmeister
|
|
|
Post by hitman on Apr 16, 2014 13:42:32 GMT -5
|
|
an171
Heat Winner
Posts: 443
|
Post by an171 on Apr 16, 2014 16:47:03 GMT -5
robbo makes one for a chrysler
|
|
|
Post by crashing513 on Apr 16, 2014 17:34:40 GMT -5
didnt have good luck with my robbo imo
|
|
Punisher 66J
Feature Winner
F**K WELD CLASS, STOCK IS FOR TRUE DERBY DRIVERS!!!
Posts: 3,789
|
Post by Punisher 66J on Apr 16, 2014 17:54:32 GMT -5
Ummm, if you scroll down you will see that its a robbo cradle. I have ran them and they are good solid cradles for pretty cheap money. Get ahold of robbo and get you a cradle.
|
|
|
Post by blackmopar21 on Apr 16, 2014 19:14:29 GMT -5
didnt have good luck with my robbo imo Maybe it's the operator then.
|
|
|
Post by crashing513 on Apr 16, 2014 19:41:14 GMT -5
naa 2 weeks late couldnt get it to bolt to 4 differnt size and years of motors. didnt buy it to havt to fix it, wasnt even close.
|
|
Punisher 66J
Feature Winner
F**K WELD CLASS, STOCK IS FOR TRUE DERBY DRIVERS!!!
Posts: 3,789
|
Post by Punisher 66J on Apr 16, 2014 19:51:12 GMT -5
naa 2 weeks late couldnt get it to bolt to 4 differnt size and years of motors. didnt buy it to havt to fix it, wasnt even close. Must be you then or somthing. Did you try to get ahold of robbo to have him fix the problem? Mine has always been fine and has never bent.
|
|
|
Post by crashing513 on Apr 16, 2014 19:54:48 GMT -5
lol ya was gunna me a 25%discount on my "next" order. really
|
|
|
Post by ducky29 on Apr 17, 2014 20:01:54 GMT -5
the first 2 years i ran robbo cradles everything worked fine but 2 of mine got junked after mounting them just like he said. the first one i was lucky and was still able to run my motor but the 2nd time it totally junked the motor and either broke or ripped out every bolt in it even though the car was still straight and firewall was cut out. m-1 gets my vote hands down
|
|
|
Post by blackmopar21 on Apr 17, 2014 20:04:58 GMT -5
naa 2 weeks late couldnt get it to bolt to 4 differnt size and years of motors. didnt buy it to havt to fix it, wasnt even close. Apparently you have never done your research on mopar engines. If a cradle is built on one block, it is guaranteed to not line up "perfectly" on any other year or model block, also there is a differencein 318 and 360's. For some reason i always managed to get mine to line up even though it was a major PITA. Like i said the operator.
|
|
|
Post by moparpowered60 on Apr 17, 2014 20:44:30 GMT -5
I just bought an m1 setup this year. It bolted right up with no problems.
|
|
|
Post by hillbilly88x on Apr 18, 2014 23:03:41 GMT -5
i make my own pretty easy really
|
|
|
Post by decker on Apr 19, 2014 8:10:56 GMT -5
i had 2 robbos... They bolted up nice to my sbms... but i ran them a bunch with never a problem... then i put both of them in seperate subframe imperials and BENT them both pretty good... But these were a few years back. Im not sure of there desing now... back then they didnt bolt to the motor anywhere else than the mounts...BUT they got me hooked on cradles because of the easy of putting in and taking them out... and no hassles with motor mounts and shit anymore...
|
|