Songalewski Trans protectors

[songalewski34]

Specializing in turbo 400 trans protectors utilizing the Nerat bell.

-Simple and effective design
-Works with steel or aluminum tail housing
-Smooth top that contours trans and does not tear tunnel
-Comes with all mounting hardware
-Can be purchased with or without the Nerat bell. I do not mark up the bell.

$325 without the bell
$625 including bell

Also building fabricated transmission pans that replace the stock stamped pan
-comes with mounting hardware
-3" deep pan
-Custom pan depths available for added fluid capacity

$190

Will be working on the 3 speed protectors after sturgis and will be looking for a few drivers to do some testing for me in exchange for a free protector once they are ready for testing.

For questions or orders please contact me at
734 652 4856

Text is best

I have no clue how to post pics on here so if someone would be kind enough to help me I would appreciate it. Thank you

[Collier7]

This is a great product. Very simple and clean design and works very well.

[FAT]

Below are the pictures of the Songalewski Trans protectors

[songalewski34]

Thanks for posting the pics Fat. All the orders being shipped will be leaving on Thursday. I will have a trans with a protector on display in Sturgis so anybody that wants to take a look please come by my trailer. Looking forward to putting more faces with names. I should have 4 or 5 extra with me there.

[Rehse17x]

Bad ass brace. Fast shipping and great guy to deal with.. Recommend to anyone who's lookin for an easy solution who has a Nerat bell or looking to get a trans setup

[16bw]

Got any pic of the guards/protective

[songalewski34]

Thanks Adam, I appreciate your business

If there are other pics needed I can send pics by text

[suicidedoorlincoln]

Ryan. I made a 3 speed brace about 5 years ago. Thought I'd throw this your way to help you out. A Saginaw has a 9 3/4" main case, a Borg Warner is 10 3/4" main case, and a Muncie is 11" . By main case I mean from where it bolts to the bell housing back to where tail shaft bolts on, case length only.. Hope it helps... Nice trans braces btw

[songalewski34]

Thanks for the info! I'm trying to gather all the input regarding 3 speeds as I can so I can get one built and ready for testing soon. Thanks again

[squig8s]

are these D.I. approved?

[suicidedoorlincoln]

No problem . I have a couple empty cases you could use for mock up. You still building radiator guards like the one you made for Jeff Jett?

[songalewski34]

Yes they are DI approved as long as they are mounted to the crossmember per their rules which require 2" of slide ability.

I could use some cases to mock up protectors with. I'm having trouble finding any locally. Yes I'm still building radiator protectors also but only by request.

[suicidedoorlincoln]

10-4. I have a Saginaw and Muncie case with tail shafts . Lemme see if I can track a Borg Warner down. They are kinda rare

[songalewski34]

Yes they are DI approved as long as they are mounted to the crossmember per their rules which require 2" of slide ability.

I could use some cases to mock up protectors with. I'm having trouble finding any locally. Yes I'm still building radiator protectors also but only by request.

[adams108]

Hey Ryan you still making 8 lug full centers? if so how much is two shipped to central il? thanks