2old4this
Heat Winner
We may not have all the answers but, we're big enough to be questionable.
Posts: 267
|
Post by 2old4this on Dec 27, 2013 15:09:55 GMT -5
I have seen a couple pics of cars with what looks like the master cylinder mounted inside the car and possibly mounted to the dash bar. Not 100% sure its master though. Do guys who run standard trannys use a cylinder inside for the clutch? I wondered if this is an easier way of being able to move a master from car to car and at the same time remove the master from the engine compartment?
|
|
|
Post by hitman23 on Dec 27, 2013 15:31:09 GMT -5
probably for the hydraulic clutch
|
|
|
Post by Sterling Archer on Dec 27, 2013 16:30:52 GMT -5
I have a floor mounted gas pedal and master cylinder all mounted on a steel plate I bolt into the floor. Cable operated gas pedal and all my brake lines are inside the car except for the one down to the rear end. I don't run front brakes.
Sent from my DROID RAZR using proboards
|
|
|
Post by C4 on Dec 27, 2013 18:45:47 GMT -5
We have one dash bar mounted brake master. Strongly considering it for a clutch master......cable clutches keep f'king me.
|
|
|
Post by rhull1977 on Dec 28, 2013 12:44:20 GMT -5
Mine is for brakes and it gives you a little more room to nose.
|
|
ynotracing
Feature Winner
Need time to work on my 74 LAC damnit
Posts: 3,629
|
Post by ynotracing on Dec 28, 2013 14:33:19 GMT -5
one for brakes and one for clutch
|
|
2old4this
Heat Winner
We may not have all the answers but, we're big enough to be questionable.
Posts: 267
|
Post by 2old4this on Dec 30, 2013 11:35:17 GMT -5
one for brakes and one for clutch Ok. Thanks for sharing! Now my next question is.........for the brake master.....is there a kit or is that fabbed in shop and how does the pedal actuate the cylinder?
|
|
|
Post by jackedup on Dec 30, 2013 16:41:27 GMT -5
There are kits but they are pricey. Doesn't take too much to build your own.
|
|
113
Heat Winner
Posts: 160
|
Post by 113 on Dec 30, 2013 21:37:22 GMT -5
one for brakes and one for clutch Ok. Thanks for sharing! Now my next question is.........for the brake master.....is there a kit or is that fabbed in shop and how does the pedal actuate the cylinder?
|
|
113
Heat Winner
Posts: 160
|
Post by 113 on Dec 30, 2013 21:40:06 GMT -5
That's my set up.All you need is a Wilwood one inch bore master and the yolk and fab the pedal however you want.
|
|
|
Post by Plowboy23x on Dec 31, 2013 14:03:28 GMT -5
does somebody sell everything in a package deal?
|
|
|
Post by XtremeMopar#307 on Dec 31, 2013 14:33:09 GMT -5
Mangled metal fab sells a clutch, brake and gas pedal all in one... All mounted to the floor..
|
|
2old4this
Heat Winner
We may not have all the answers but, we're big enough to be questionable.
Posts: 267
|
Post by 2old4this on Jan 1, 2014 16:33:50 GMT -5
Thanks for info. Much appreciated.
|
|
|
Post by goines2 on Jan 3, 2014 21:38:17 GMT -5
MY BRAKE MASTER MOUNTS TO THE DASHBAR, OR CAN FLOOR MOUNT. ITS A WILLWOOD SETUP.
|
|
|
Post by moen003 on Jan 8, 2014 10:32:53 GMT -5
mevs mod shop makes them too floor mounted
|
|