CrownVICtor
Heat Winner
Victor - A winner in any struggle or contest.
Posts: 560
|
Post by CrownVICtor on Sept 5, 2014 20:42:38 GMT -5
The Annual Fall Brawl/End of Year Derby will be held on October 5th at the Huron County Fairgrouds in Norwalk OH. 44857. Inspection starts at 9:00 a.m. Derby Starts at 2:00 p.m. Power Wheels start at 1:30 p.m. "Just down the turnpike for you Fulton County drivers" $5 gate fee for spectators/crew members. $40 Entry Fee for Drivers. (Entry fee will get driver, truck and trailer into the pits). Drivers, Builders and spectators are welcome to bring parts and cars for the swap meet. This year we will set up a designated area on the horse track for the swap meet. There will be a 5$ fee for the swap meet, which will be put back into the derby for increased payout, hardest hitter, etc. Also just confirmed that Seneca Core, from Tiffin OH will be onsite to purchase cores, catalitic converters, aluminum wheels, etc. Contact Craig with Seneca Core at 419-618-6717. Guaranteed to have the following classes with 100% payback plus additional sponsorship moneys and trophy. If you would like to sponsor please contact Bill via PM, phone or text at 419-681-6121. We intend to have a hardest hitter for each class. Classes Compact Car Youth Compact Car Fullsize Truck 80's and Newer - Stock 80's and Newer - Weld Modified Car Power Wheels Lawn Mower Fullsize Car Old + New Compact Truck Midsize Car Bring a car, and we will find you a class, or make a class for it. All classes are "planned" to be Feature Only (No heats). 103 Cars participated last year. Was a great show. Hoping for more cars this year. Read more: we-crash.proboards.com/thread/51876/demo-derby-swap-buying-norwalk#ixzz3CUmeYGtE
|
|
|
Post by dcornell20 on Sept 5, 2014 21:10:01 GMT -5
What was top 3 in each class
|
|
|
Post by brewsbros on Sept 6, 2014 13:17:45 GMT -5
We'd like to thank everyone for coming out on Thursday. Thoughts and prayers continue to be with Mr. Kuszmaul as he makes his way through recovery. The event had some really tough car and truck heats followed by a difficult feature event. It seems as though we have a pretty good balance between new and old iron with the final 6 cars being a split. If you have any rule modification suggestions, shoot me and email or text. Thinking about adding a 80&newer stock heat and Powerwheels for next season.
|
|
|
Post by derbynews583 on Sept 6, 2014 15:55:32 GMT -5
Power Wheels are a hit everywhere. As far as rule suggestions, no coolers for the water from the motor allowed other than radiator.
|
|
|
Post by IDerby63 on Sept 7, 2014 14:29:19 GMT -5
I vote to leave the rules as they are.
|
|
|
Post by Vicnasty on Sept 7, 2014 18:13:07 GMT -5
I vote Pedro for president
|
|
slim
Future Icon
Posts: 52
|
Post by slim on Sept 7, 2014 20:04:52 GMT -5
change bumper rule about it
|
|
|
Post by Vicnasty on Sept 7, 2014 20:22:46 GMT -5
Bumpers? Whats wrong with the rule about them....seam welded is good enough
|
|
|
Post by onehardhitter0129 on Sept 7, 2014 20:28:17 GMT -5
Tranny cooler mounted in back seat area. Not in front seat
|
|
|
Post by carr87 on Sept 8, 2014 9:31:36 GMT -5
I would like to see a stock class!!!
|
|
|
Post by gkoutfitters on Sept 8, 2014 18:36:06 GMT -5
Keep the rules the same
|
|
toby
Heat Winner
Not the good one.
Posts: 161
|
Post by toby on Sept 10, 2014 8:20:42 GMT -5
We'd like to thank everyone for coming out on Thursday. Thoughts and prayers continue to be with Mr. Kuszmaul as he makes his way through recovery. The event had some really tough car and truck heats followed by a difficult feature event. It seems as though we have a pretty good balance between new and old iron with the final 6 cars being a split. If you have any rule modification suggestions, shoot me and email or text. Thinking about adding a 80&newer stock heat and Powerwheels for next season. Welding is like 4 play some is ok but the less of it I have to do before I get to the good part the better. (Although bolting spring swaps and hammering frames fenders is even worse than welding)
|
|
|
Post by bub216 on Sept 10, 2014 14:33:10 GMT -5
I Say no wagons just cuz there was 2 in the top 5! LMAO JUST KIDDING!!!!!! I like the rules with what we have you can build a hard a$$ new or old school car and possibly get a 2nd run out of it.... does it take a little more time and effort to build a car.... yes but hey that's the name of the game!!!! Only rule I'd like to see changed is let a loaded bumper on the front... yes (LOADED) not homemade!! Loaded meaning a stock oem bumper. That can be load the inside of it! Front and back skin must appear stock! Only reason I say this is I saw MANY front bumpers trashed Thursday night and we all know the price of them isn't getting any cheaper! Load up a decent bumper and will be able to run it multiple times for a fairly cheep price! Instead of trashing a 300 dollar bumper every year! That's my 2 cents which don't mean much lol but can't wait to see what yall come up with and we will see ya next year
|
|
|
Post by Vicnasty on Sept 24, 2014 8:51:34 GMT -5
Huuuuuuump plates for anything....just say in....other then that its all good I guess
|
|
|
Post by gmderbyguy on Sept 24, 2014 11:47:02 GMT -5
i had one of the bumpers that got junked and i agree allow loaded bumpers next year. got one sittin there ready to be welded on lol.
|
|