|
|
Post by pasterofmuppets on Apr 9, 2013 9:55:32 GMT -5
Found two 74 chevy malibu bumpers at the junkyard and picked em up for $25 each. Figured at worse I can use the skins. They look like the impalas with a similar shaped and sized point but have turn signal holes outside the bumper mounts. Anyone know how they hold up, never used one.
|
|
|
|
Bumpers
Apr 23, 2013 9:31:44 GMT -5
Post by durbin77 on Apr 23, 2013 9:31:44 GMT -5
Then your not doing it right. Has anybody made one full of lead just cuz? You would not be able to lift a bumper full of lead.. I bet it would weight 550-600 pounds.. |
|
|
|
Post by Plowboy23x on Apr 23, 2013 9:58:35 GMT -5
The pipe as the bumper
Sent from my DROID RAZR HD using proboards
|
|
|
|
Bumpers
Apr 25, 2013 1:32:18 GMT -5
Post by caleb21 on Apr 25, 2013 1:32:18 GMT -5
How about a flipped 76 Buick bumper on a 73 impala? Stock show
|
|
TRAVI 157
Heat Winner
because overkill is underrated
Posts: 623
|
Bumpers
Apr 25, 2013 15:50:44 GMT -5
Post by TRAVI 157 on Apr 25, 2013 15:50:44 GMT -5
Found two 74 chevy malibu bumpers at the junkyard and picked em up for $25 each. Figured at worse I can use the skins. They look like the impalas with a similar shaped and sized point but have turn signal holes outside the bumper mounts. Anyone know how they hold up, never used one. first run  after 3rd run added a little bit of steel around in and put a fresh skin on the front of the old one  after run 6  after 7th run i just straightened the drivers corner with a track hoe and put a half inch plate a little farther than my shock on each side  |
|
|
|
Post by Plowboy23x on Apr 25, 2013 23:30:49 GMT -5
Pretty badass bumper! Y'all got.
Sent from my DROID RAZR HD using proboards
|
|
|
|
Bumpers
Apr 26, 2013 0:24:09 GMT -5
Post by chevykillerx13 on Apr 26, 2013 0:24:09 GMT -5
Ok 74 Elite bumper compared to a mopar pointy? When I got it I thought it was a mopar, thought Chrysler made some without vents in them, did a little research on Li e and came up with a 74 ford torino elite bumper. Point is like 10-11", the backing is solid, and the corners of the backing are folded over and bolted (this is un-altered). Not trying to start an argument, just wanna see where this bumper falls in the list. Looks like a shitbrickhouse.
|
|
|
|
Bumpers
Apr 27, 2013 1:05:16 GMT -5
Post by XtremeMopar#307 on Apr 27, 2013 1:05:16 GMT -5
and that it is... probly the best ford bumper out there
|
|
|
|
Post by Plowboy23x on Apr 27, 2013 15:48:38 GMT -5
Whos bumper is a shitbrickhouse the one of the Torino?
Sent from my DROID RAZR HD using proboards
|
|
|
|
Bumpers
Apr 27, 2013 18:04:01 GMT -5
Post by chevykillerx13 on Apr 27, 2013 18:04:01 GMT -5
Lol I was referring to my elite bumper. ford definitely did us good when the designed this sucker.
|
|
|
|
Bumpers
May 20, 2013 14:37:54 GMT -5
Post by muddigger750 on May 20, 2013 14:37:54 GMT -5
any opinions for a truck demo bumper? I got a 77 f250 front bumper is pretty weak but rear is big but hollow and thin
|
|
|
|
Bumpers
May 21, 2013 21:46:18 GMT -5
Post by s1demo on May 21, 2013 21:46:18 GMT -5
Top and bottom
|
|
|
|
Bumpers
May 21, 2013 21:47:55 GMT -5
Post by Demodude57 on May 21, 2013 21:47:55 GMT -5
Anybody know if these are good?  picked up these 4 bumpers for $300. Attachments:
|
|
|
|
Bumpers
May 21, 2013 22:00:20 GMT -5
Post by s1demo on May 21, 2013 22:00:20 GMT -5
Malibu bumpers week imo
|
|
|
|
Bumpers
May 21, 2013 22:10:54 GMT -5
Post by s1demo on May 21, 2013 22:10:54 GMT -5
Yep Attachments:
|
|
picked up these 4 bumpers for $300.
