|
|
Bumpers
Jul 9, 2014 18:14:26 GMT -5
Post by runit28 on Jul 9, 2014 18:14:26 GMT -5
Do you happen to know it they are close to the same? Im thinking about running it on my 69 continental mark 3 Without seeing the backing of the 76 (google image search) i'd say they are the same bumper. flat steel backed, with a small point, i would say its comparable to the ford elite bumper on pg 9 with less point and its flatter along the back (mounting) side. I haven't looked at it in a while but i think you are corret from what I can tell. Im not sure how well it would mount on the continental though. |
|
|
|
Bumpers
Jul 9, 2014 18:17:47 GMT -5
Post by runit28 on Jul 9, 2014 18:17:47 GMT -5
The bumpers onthe continental now are crap, the aluminum plate with nothing behind it. I also have a rear bumper from a 79 cadilac deville, it has been used once but but doesn't have much damage, more from it being my first full sized car than actually being used. Has anyone had experience actually making contact with these or if anyone knows how they will hold up? Thanks for the help.
|
|
|
|
Bumpers
Sept 2, 2014 21:26:45 GMT -5
via mobile
Post by chevy708 on Sept 2, 2014 21:26:45 GMT -5
Anybody run a 75-76 (dodge or Plymouth) valiant bumper with any luck
|
|
|
|
Bumpers
Sept 2, 2014 21:55:40 GMT -5
via mobile
Post by derbydriver666 on Sept 2, 2014 21:55:40 GMT -5
Not bad bumpers. Easy to stuff  |
|
|
|
Bumpers
Sept 2, 2014 22:02:45 GMT -5
via mobile
Post by chevy708 on Sept 2, 2014 22:02:45 GMT -5
I thought it looked pretty good think it would be good on a tilted 2000 Vic hardnosed
|
|
|
|
Bumpers
Sept 3, 2014 1:11:57 GMT -5
Post by derbydriver666 on Sept 3, 2014 1:11:57 GMT -5
Need a stronger bumper |
|
|
|
Bumpers
Sept 3, 2014 6:57:15 GMT -5
via mobile
Post by chevy708 on Sept 3, 2014 6:57:15 GMT -5
Ok thanks I guess I'll put a prerun 74 or 76 impala bumper on it
|
|
|
|
Bumpers
Sept 3, 2014 8:28:54 GMT -5
Post by 383 Sonoma on Sept 3, 2014 8:28:54 GMT -5
you'll turn the 76 impala bumper inside out.... hell I've junked several 74 impala bumpers on newer fords... you better load whatever you have for a bumper...
|
|
|
|
Bumpers
Sept 3, 2014 9:10:36 GMT -5
via mobile
Post by chevy708 on Sept 3, 2014 9:10:36 GMT -5
Ok thanks I'll load the crap out of that fresh valiant bumper
|
|
02
Heat Winner
Official Keyboard Jocky, and Sh!t Starter!
Posts: 373
|
Bumpers
Dec 18, 2014 14:02:45 GMT -5
via mobile
Post by 02 on Dec 18, 2014 14:02:45 GMT -5
Are there any good 60s bumpers at all? Going to a yard in a couple hours but it has primarily 60s stuff. Thanks
|
|
lincoln
Feature Winner
Posts: 3,178
|
Bumpers
Dec 18, 2014 15:43:58 GMT -5
via mobile
Post by lincoln on Dec 18, 2014 15:43:58 GMT -5
No
Need at least 73 on some, most start in 74.
|
|
|
|
Bumpers
Apr 25, 2015 16:56:24 GMT -5
via mobile
Post by beefybuilt104 on Apr 25, 2015 16:56:24 GMT -5
I'm building a stock type car, no frame welding or anything like that. It's a 89 chevy caprice wagon. I am trying to figure out what bumper to run and what would hold up better, either a preran 80s steel Vic bumper or a 80s gm steel back bumper? I would assume they'd be about the same strength but I could be wrong. Thanks.
|
|
|
|
Bumpers
May 1, 2015 16:20:59 GMT -5
Post by lotusmaster83 on May 1, 2015 16:20:59 GMT -5
any 1984+ bumpers ideal for loading? limited holes flat backing
|
|
|
|
Bumpers
May 4, 2015 12:52:33 GMT -5
Post by fordpowerforever on May 4, 2015 12:52:33 GMT -5
any 1984+ bumpers ideal for loading? limited holes flat backing ford bumpers |
|
|
|
Post by Comet Cyclone on May 4, 2015 18:26:54 GMT -5
There full of holes..BTW what is the best 80s bumper
|
|
