|
Post by crippledisaster2z on May 24, 2015 14:51:50 GMT -5
the how to tilt video link doesn't work, is it my computer or an error on the site?
|
|
|
Post by kraftsman on May 26, 2015 10:38:08 GMT -5
Try searching for it on YouTube. I think the poster is davesgarage512.
Sent from my E6782 using proboards
|
|
sam24
Future Icon
Posts: 15
|
Post by sam24 on Mar 9, 2016 20:02:26 GMT -5
hi i have a 2000 grand marquis and i cant put 8plates to the frame where should i place them thanks
|
|
|
Post by STROMI 121 on Mar 29, 2016 9:13:32 GMT -5
|
|
|
Post by traviswatkins75 on Aug 2, 2016 14:24:24 GMT -5
has any one tried using a porta power to press out the front frame to make it harder?
|
|
|
Post by JR/77x on Aug 13, 2016 7:20:54 GMT -5
has any one tried using a porta power to press out the front frame to make it harder? I'm not too sure on that imo I think it would make the section before the a arms weaker plus your steering box would be on a slight angle and you would have too do some work to the rad support depending on how far your pushing out...but trying new stuff is not a bad thing either if you think it will work try it and experiment!!!
|
|
|
Post by derby2racer on Feb 4, 2017 10:09:17 GMT -5
What thread is a 64 mercury comet wagon under?
|
|
|
Post by STROMI 121 on Feb 7, 2017 8:34:42 GMT -5
I don't think anyone runs comets.
|
|
|
Post by lsuakme on Feb 19, 2019 21:47:10 GMT -5
I don't know how best to be able to tell but are there enough kiwis and Aussies on here to make a dedicated thread for Australian ford falcons (1960-2016)? I personally have an ED wagon (1994) and an EL sedan (1997) but I wont add an additional thread unless it feels like it's needed
|
|
|
Post by Gumnutz114 on Feb 19, 2019 22:17:59 GMT -5
I don't know how best to be able to tell but are there enough kiwis and Aussies on here to make a dedicated thread for Australian ford falcons (1960-2016)? I personally have an ED wagon (1994) and an EL sedan (1997) but I wont add an additional thread unless it feels like it's needed Well to get the ball rolling i'm an Aussie. But in an honest opinion i don't think there would be enough info on them to make a thread. The rules over this side of the globe are very stock and so we wouldn't have all the interesting info about swapping motors and where to weld to make them stronger. JMO
|
|
|
Post by lsuakme on Feb 21, 2019 1:19:49 GMT -5
Yea fair enough, rules are fairly stock here in NZ too but I wasn't sure if there were some tips and tricks to be shared in and around smartlock systems and bypasses, different 4l parts to make the best engine (my Ed is EL block, au head and injection, ED manifold and a couple other bits) as well as other things like the best ways to hold bonnet down for max front end support etc. I see a lot of you guys get heaps of runs out of xf panelvans and utes so was hoping some tips may transfer across the whole ute/wagon platform
|
|
|
Post by miketolle on Jun 19, 2023 22:39:13 GMT -5
Every time I click on the links it tells me there is a 403 error code screen. I am looking to if anyone has this issue or am I just stupid? Thanks and Have a great day.
Michael Tolle
|
|