|
Post by chevyblaze720 on Jul 16, 2019 0:34:29 GMT -5
So i have a 4.6 in a 97 Lincoln town car! I’d like too convert it into carb! How do I wire up the coil back
|
|
|
Post by redneckracing12 on Jul 17, 2019 8:07:22 GMT -5
So i have a 4.6 in a 97 Lincoln town car! I’d like too convert it into carb! How do I wire up the coil back There's a few company's that make carb conversion kits for the 4.6, it's about $650. Comes with ignition box/coil controller, intake, gaskets etc.
|
|
demoboy333
Feature Winner
Enter your message here...
Posts: 3,123
|
Post by demoboy333 on Feb 25, 2020 13:23:35 GMT -5
Question on efi motors. Are they a roller cam?
|
|
|
Post by wreckage on Feb 25, 2020 13:48:49 GMT -5
Question on efi motors. Are they a roller cam? The later 80’s and early 90’s 302’s are.
|
|
|
Post by redneckracing12 on Feb 29, 2020 20:38:55 GMT -5
General rule of thumb that's right about 99% of the time atleast for the vics anyways, if it's tbi it's going to be flat tappet, if it's the plenum style it will be roller.
|
|