|
Post by truck333 on Apr 18, 2013 15:33:59 GMT -5
The rules i built to didnt permit body bolts through trunk...and no that is the stock trunk lid for that car.
|
|
|
Post by truck333 on Apr 18, 2013 15:36:02 GMT -5
car has hump plates not allowed leafs.
|
|
|
Post by derbypro on Apr 24, 2013 10:39:36 GMT -5
did you cut any of the trunk brace?
|
|
|
Post by drphiluponya55xr on Apr 24, 2013 22:01:12 GMT -5
. Almost done
|
|
|
Post by XtremeMopar#307 on Apr 24, 2013 22:40:50 GMT -5
first Ford... wanted it lower but didnt know I had to cut out the trunk hinges and it started to tear in the middle so called it good... well see how it does June 8th... backend will go down a little lower and needs to be tilted yet
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Apr 25, 2013 6:45:57 GMT -5
. Almost done Looks like that puppy's gonna be strong!! Nice build man 121
|
|
|
Post by fordpower111 on Apr 25, 2013 21:08:10 GMT -5
Whats the short pieces of tube for in the back? Is that a body mount?
|
|
|
Post by drphiluponya55xr on Apr 25, 2013 22:21:47 GMT -5
That's extra body mount and thanks lot of hours first ever car I've built hope it does ok
|
|
leadfoot455
Heat Winner
I drive this way on purpose!
Posts: 604
|
Post by leadfoot455 on Apr 25, 2013 22:36:37 GMT -5
That's extra body mount and thanks lot of hours first ever car I've built hope it does ok Looks like it should do great! Make sure and share some after pics!
|
|
|
Post by drphiluponya55xr on Apr 27, 2013 11:09:45 GMT -5
Yes it is angled up as far as I could get it
|
|
|
Post by wallberg61 on Apr 27, 2013 15:09:30 GMT -5
i'd hate to be on the recieving end of that truck, i'm sure the way it's built not even an Imperial would hold up long
|
|
|
Post by wallberg61 on Apr 27, 2013 15:10:10 GMT -5
trunk*
|
|
|
Post by drphiluponya55xr on Apr 27, 2013 23:48:33 GMT -5
Lol thanks
|
|
|
Post by beefybuilt104 on Apr 29, 2013 19:05:26 GMT -5
i have a 92 crown vic for this year. was planning to canoe like everybody else does on here, was wondering if to get it to fold prefectly the way everybodies does if you are notching the frame at all? and if you are where?
|
|
|
Post by derbykid123 on Apr 29, 2013 19:17:00 GMT -5
Im pretty sure the notch after the bumper but correct me if I'm wrong
|
|