|
Post by gmwagon on May 3, 2013 11:19:43 GMT -5
For 20 minutes I'd run a radi . barrel
|
|
|
Post by rhull1977 on May 3, 2013 11:23:15 GMT -5
How much are you guys adding? And do you have a preference. Dawn or Fabric softner? It doesnt take much a tablespoon full of dish liquid is plenty
|
|
joker14
Feature Winner
The more I see the less I have to believe.
Posts: 3,468
|
Post by joker14 on May 3, 2013 20:37:30 GMT -5
Tarus fan. best all around affordable OEM fan. youve seen all my sh!t nate. mounts fairly easily, cools well, nice shroud, easy to wire, durability is good as long as you trim the lip of the fan, it tends to rub the shroud when it gets twisted, other than that its pretty tough. Spal makes the best 12-16 volt aftermarket fan for all out cooling. little pricey and not as easy to mount.
|
|
|
Post by fackelberry on Jun 3, 2013 20:52:11 GMT -5
What pressure radiator cap you all using for your SBC's? And do you use coolant and water, water with additive like water wetter, or just plain water? Heats will be up to 15min and feature maybe 30min. Thanks
|
|
|
Post by moparpowered60 on Jul 22, 2013 14:38:18 GMT -5
What's the best way to fix an aluminum radiator. Has a small pinhole where the fan got into it a little.
|
|
|
Post by Comet Cyclone on Jul 22, 2013 19:37:15 GMT -5
most likely JB weld.
|
|
|
Post by moparpowered60 on Jul 22, 2013 21:06:36 GMT -5
That's what I was guna try. Just thought I'd ask. Thanks
|
|
|
Post by Derbyu02 on Jul 22, 2013 21:59:22 GMT -5
Bondo
Sent from my ADR6410LVW using proboards
|
|
61j
Heat Winner
Posts: 503
|
Post by 61j on Jul 23, 2013 7:10:19 GMT -5
Speedway Sells A Aluminum Radiator Repair Kit. You Could Also Talk To Your Local Radiator Repair Shop.
|
|
|
Post by moparpowered60 on Jul 23, 2013 11:26:01 GMT -5
One local shop suggested jb weld.
|
|
|
Post by justforfun1973 on Oct 19, 2013 1:20:36 GMT -5
Here is what i use.... $28 where can you buy one of these? What year model Mopar?
|
|
toby
Heat Winner
Not the good one.
Posts: 161
|
Post by toby on Oct 19, 2013 19:00:01 GMT -5
|
|
|
Post by justforfun1973 on Oct 20, 2013 1:00:10 GMT -5
^^ thanks. I've got a couple hoses and wanna loop them together will work perfect.
|
|
|
Post by moparjim on Oct 23, 2013 0:44:26 GMT -5
I start the night with a radiator but if it gets taken out in the heat I loop it for the main so there is something besides air circulating in there. Wrecking yard electric fans are what I prefer, mounted under the hood against the radiator slightly to the left or right of the pulley of course. Some make it, some don't lol.
|
|
|
Post by Comet Cyclone on Nov 14, 2013 13:12:11 GMT -5
I've been running the taurus fans too.I have a couple 90 ish volvo wagon fans I'm gonna try out.The fan bolts on in a ciruclar pattern to it's shroud the type I'm talking about.I'm thinking about making a steel/alumium shroud for it.Not sure on performance but it's slim.
|
|