|
Post by cheezwhiz31 on Feb 16, 2013 9:12:01 GMT -5
^^ i take calipers off....had rims bend and then no go get stuck on caliper so now no more........then you can use the for spindle...
|
|
|
Post by derby111 on Feb 16, 2013 22:34:44 GMT -5
I went to pick up an 01 merc tonight and the owner misplaced the keys is there a simple way to unlock the column on one of these.
|
|
TRAVI 157
Heat Winner
because overkill is underrated
Posts: 623
|
Post by TRAVI 157 on Feb 17, 2013 17:55:35 GMT -5
Unbolt it in front of the fire wall or turn it real hard and break it
|
|
|
Post by 357crawford on Feb 18, 2013 0:23:02 GMT -5
Is there anyone that shortens the rear frame, kinda like hard nosing the front. Does it help? we are aloud hump plates so I will definitely be using them. Heard it makes the rear harder to bend up with less leverage and all. Any body have input?
|
|
|
Post by Comet Cyclone on Feb 18, 2013 0:29:19 GMT -5
I'd be interested in knowing what you do with the remaining sheet metal?
|
|
68X
Heat Winner
Posts: 419
|
Post by 68X on Feb 18, 2013 2:15:49 GMT -5
The only way I could see it helping is if you shortened it enough to connect your bumper to the hump plates with the bumper shocks. But that wouldn't fly around here.
|
|
|
Post by Dan-Ervine-383 on Feb 18, 2013 6:56:34 GMT -5
Makes them pretty tough if you're allowed to do it.
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Feb 18, 2013 8:14:18 GMT -5
This one was shortened..an was hard as hell!, 121
|
|
|
Post by trap44w on Feb 18, 2013 16:52:20 GMT -5
I have no 80's uppers or spindles , anyone no of a bracket and caliper that will fit on a 99 vic to run 15's
|
|
ZTR09
Heat Winner
Making Precision Hit's Near you
Posts: 595
|
Post by ZTR09 on Feb 19, 2013 18:52:13 GMT -5
|
|
TRAVI 157
Heat Winner
because overkill is underrated
Posts: 623
|
Post by TRAVI 157 on Feb 19, 2013 19:11:29 GMT -5
im not saying your product sucks but after 2 hours of fighting with the brackets i finnaly got my rear end in the car not a single bolt hole ligned up
|
|
|
Post by wikkidvixx on Feb 19, 2013 19:12:37 GMT -5
I have no 80's uppers or spindles , anyone no of a bracket and caliper that will fit on a 99 vic to run 15's try a 95, 96 or 97
|
|
|
Post by ajb729 on Feb 19, 2013 19:15:37 GMT -5
I got mine from Sawanso derby products, hopefully they work well and don't take 2 hours to install..
|
|
ZTR09
Heat Winner
Making Precision Hit's Near you
Posts: 595
|
Post by ZTR09 on Feb 19, 2013 22:47:47 GMT -5
im not saying your product sucks but after 2 hours of fighting with the brackets i finnaly got my rear end in the car not a single bolt hole ligned up What do you mean a bolt hole didn't line up? on the brackets them self or had a hard time putting them on a car? If the holes were were wrong in the brackets wish you would had called i would have sent a new set If had a hard time putting in the car there's the easy way and a hard way i can put a set on in 30mins welded/bolted in if you run a nine inch im sure you might have ran into issues but they go right on a 10bolt gm lowers are tricky but would have been glad to help over the phone
|
|
|
Post by 686racing on Feb 22, 2013 20:13:34 GMT -5
im not saying your product sucks but after 2 hours of fighting with the brackets i finnaly got my rear end in the car not a single bolt hole ligned up What do you mean a bolt hole didn't line up? on the brackets them self or had a hard time putting them on a car? If the holes were were wrong in the brackets wish you would had called i would have sent a new set If had a hard time putting in the car there's the easy way and a hard way i can put a set on in 30mins welded/bolted in if you run a nine inch im sure you might have ran into issues but they go right on a 10bolt gm lowers are tricky but would have been glad to help over the phone I have to say zach has been more then helpful... apparently i was doing it the hard way called him on the phone 45 minutes and two text picture messages later they where in welded bolted in on my 10 bolt..,... great guys to deal with IMO.. BTW zach i found my half inch.. lol sometimes when you don;t look at it for a nite you figure it out quick.. all in all done.. thanks for all your help.
|
|