|
Post by scottgropp on Mar 12, 2013 22:43:10 GMT -5
Nope, learned my lesson on shipping to Canada.
|
|
911
Heat Winner
Posts: 300
|
Post by 911 on Apr 8, 2013 4:33:35 GMT -5
How thick are the sidewalls on the 14s compared to the 15s?
|
|
|
Post by scottgropp on Apr 8, 2013 12:34:42 GMT -5
14's are six ply, 15's are 10 ply, so the 15's are thicker not only in rating, but in actual thickness. The 15's are very stiff.
|
|
|
Post by scottgropp on Apr 9, 2013 0:37:42 GMT -5
Blowing out 7.00x15 10 Ply Straight tread Interco blems. $79 each, or $75 for 10+ at a time. Before I have 200 questions about shipping - figure roughly $20 per tire.
|
|
|
Post by bigwhite999 on Apr 9, 2013 9:18:14 GMT -5
Where are you located?
|
|
fordrecker
Heat Winner
Let the 2013 building begin
Posts: 298
|
Post by fordrecker on Apr 14, 2013 20:30:13 GMT -5
How tall are the ten plys
|
|
|
Post by hossxxx on Apr 16, 2013 8:29:37 GMT -5
are u going to S.E. if so, will you have 15 inch tubes on hand..price per?? Thanks
|
|
|
Post by scottgropp on Apr 16, 2013 9:57:00 GMT -5
700-15 Ten plys, as measured with no air and not mounted, were 28 1/4"
Will be there, will have tubes to sell with tires, and may have a machine, but I doubt I will sell just the tubes. Can't justify selling 50 good quality tubes at $9.00, making $1 each, then needing them to have for tire customers. Plenty of other folks will have the super cheap tubes there, I'm guessing.
I won't list prices until I get to the show. Will try to post them on here once I set up for people who are traveling. If I post them now people will just try to undercut me by a buck so I'll let them set their prices for what they are.
I will have smokin' deals on 25x8.5x14 titan 6 ply skids (no blem), 700x15 10 ply straights, and 27x8.5x15's. Will also have a good supply of 14" rims to weld centers in for much less than a ranger rim.
Will take photos of tires when I get ready to leave.
|
|
|
Post by chevy88 on Apr 19, 2013 0:03:33 GMT -5
I would like two of the 7.00x15s. Can I pick them up at se.
|
|
|
Post by scottgropp on Apr 19, 2013 9:20:36 GMT -5
Sure.
|
|
|
Post by milkman on Apr 19, 2013 18:06:08 GMT -5
Scott - Sent you a PM on when carb rebuid is going to be sent.
Thanks Lanny Rettig
|
|
|
Post by Honkey101 on May 7, 2013 19:22:43 GMT -5
Scott- Will you be at mayhem and have tires with you to sell?
Thanks Mike
|
|
|
Post by Ripper86 on May 7, 2013 22:17:00 GMT -5
Scott- Will you be at mayhem and have tires with you to sell? Thanks Mike Yes!!!
|
|
|
Post by Honkey101 on May 8, 2013 10:57:37 GMT -5
Thanks!! See you then.
Mike
Sent from my SCH-R930 using proboards
|
|
|
Post by mudslinger226 on May 29, 2013 4:42:06 GMT -5
Scott- Will you be at mayhem and have tires with you to sell? Thanks Mike Yes!!! Will u guys have the tire machine at mayhem? Have some ten plys I need on new rims . I think I got 2 or 4 that need New rims. Or maybe just buy some skids on rims already if u guys do that. Looking to get em done early Saturday. Thanks
|
|