|
Post by chevysuckmopar2041 on Jan 16, 2013 19:54:09 GMT -5
after pics Attachments:
|
|
|
Post by 513monster on Jan 16, 2013 21:26:24 GMT -5
a little sheet metal work, some fix me plates, and a wedge and shes good to go!
|
|
|
Post by chevysuckmopar2041 on Jan 17, 2013 15:49:22 GMT -5
ya i got to get some moser axles in it. and they broke my cage i had 6" c channel done the doors and its bent like a u. im going with 4/6 square tubing it wont bend this time.
|
|
|
Post by derbynut44 on Jan 28, 2013 18:31:25 GMT -5
does anyone know what other clip would fit on a 64 mercury montera? just curious.
|
|
wcase
Future Icon
Posts: 2
|
Post by wcase on Jan 28, 2013 20:20:13 GMT -5
I made a chevy truck front clip work on my galaxie...... looked funny but worked well, lot of cutting and rolling and some trimming to make the core support work but not too bad with a torch and a welder
|
|
grinder
Heat Winner
patina
Posts: 281
|
Post by grinder on Feb 3, 2013 1:43:48 GMT -5
What model edsel was that?
|
|
|
Post by nathanxx on Feb 3, 2013 2:23:32 GMT -5
notch the rear or leave it?
|
|
|
Post by derbydriver666 on Feb 3, 2013 17:21:38 GMT -5
I put a very small dimple at the very end of the window on the inside of the frame right behind the hanger...... I WOULDNT NOTCH ONE OF THESE......>EVER
|
|
|
Post by RockyVI on Feb 4, 2013 6:30:09 GMT -5
X2 on any full frame car with leaf springs.
|
|
|
Post by chevysuckmopar2041 on Feb 4, 2013 16:02:17 GMT -5
grinder it was a 58 edsel ranger.
|
|
|
Post by moparded on Feb 4, 2013 19:47:41 GMT -5
How tall are the bop rear brackets? I'm allowed to run a 4in 3/8 plate from front to front of a-arms To mount the front bumper.
|
|
grinder
Heat Winner
patina
Posts: 281
|
Post by grinder on Feb 4, 2013 22:07:59 GMT -5
grinder it was a 58 edsel ranger. i got stuck on your bumper
|
|
|
Post by chevysuckmopar2041 on Feb 5, 2013 16:05:30 GMT -5
i ran 76 pontiac front mounts and they were about 12" long and about 6" high. i think the 74 76 chevy rear brakets are better then that 3/8 steel it might bend sideways.
|
|
|
Post by chevysuckmopar2041 on Feb 5, 2013 16:08:32 GMT -5
ya i watched that video of brookville and that bumper just fell apart early. not this year im putting a new yorker rear on it. its coming back for the second run and i need another set of moser axles. did you see those bend out there that was a bumpy ride.
|
|
|
Post by redneckracing12 on Feb 5, 2013 18:50:16 GMT -5
ya i watched that video of brookville and that bumper just fell apart early. not this year im putting a new yorker rear on it. its coming back for the second run and i need another set of moser axles. did you see those bend out there that was a bumpy ride. I was amazed at how bad you axles got bent, but you were a ton of fun to watch last year and am looking forward to watch you run again this year.
|
|