|
Post by cope187 on Mar 7, 2013 20:12:07 GMT -5
|
|
lincoln
Feature Winner
Posts: 3,175
|
Post by lincoln on Mar 7, 2013 21:09:57 GMT -5
I found those on youtube a while back. Places use them for storage to save space.
I wonder how much them babies cost
|
|
99x
Feature Winner
Most hated motorsports
Posts: 1,197
|
Post by 99x on Mar 7, 2013 21:38:31 GMT -5
I made one with 2x2 angle for the table. Acme threaded rod for the moveable pin. And two some round stock. Very easy to make just with I didn't have to turn the handle by hand.
|
|
warpig98
Future Icon
Poor Boyz Motorsports
Posts: 110
|
Post by warpig98 on Mar 7, 2013 22:07:07 GMT -5
so i got 185-65-15 snow tires that i wanna double. wat the hell size should i use in those? i think i have the smallest size 15" available. do i needa go down to a 14" tire? and if so wat size 14" would i go with?
|
|
cw09
Heat Winner
Posts: 528
|
Post by cw09 on Mar 7, 2013 22:15:53 GMT -5
so i got 185-65-15 snow tires that i wanna double. wat the hell size should i use in those? i think i have the smallest size 15" available. do i needa go down to a 14" tire? and if so wat size 14" would i go with? If you are going to cut the inner bead off you have a lot of options. Other wise putting a 14 inside of 15 and mounting on a 14 rim I'm pretty sure your snow tires would be spinning on the stuffer.
|
|
|
Post by cope187 on Mar 7, 2013 22:38:52 GMT -5
What about e78-14, hr70-14, 185-14 thanks for help
Sent from my SPH-L710 using proboards
|
|
cw09
Heat Winner
Posts: 528
|
Post by cw09 on Mar 7, 2013 22:48:54 GMT -5
Stand them side by side. See if the stuffer is at least an inch shorter. If not you can't unless you want an indention going into the tube from the stuffer and they're no fun to take out. I've had to take out two tires and it wasn't fun.
|
|
|
Post by cope187 on Mar 11, 2013 18:07:53 GMT -5
|
|
|
Post by Krazy12 on May 26, 2013 18:48:30 GMT -5
i got a 205/70/14 i have a 185/65/14 to put in it will a 65 work or will it need to be a 70?
|
|
|
Post by cowdoc on May 26, 2013 20:48:04 GMT -5
I've always wondered if all that extra weight makes it easier to snap rear axles?
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on May 29, 2013 18:41:30 GMT -5
Those doubling machines are pretty cool. Only problem I see is you can only order them from Germany or some Japanese Company (?) I bet shipping costs would be more than supplies to build one. I have an old log splitter that I want to make a track and build one with. Hydraulic powered? Let's see how it works.
|
|
|
Post by fordpower111 on May 29, 2013 19:30:38 GMT -5
Putting tire inside a tire is not the hard part. The hard part is getting the tire on the wheel without pinching the tube.
|
|
|
Post by sperl31 on Jun 12, 2013 20:01:36 GMT -5
So does any1 know what stuffer fits inside 27x8.5x15 skidsteer rears? Please help!
|
|
|
Post by fordpower111 on Jun 12, 2013 21:05:31 GMT -5
p195 65 or 70 15
|
|
|
Post by sperl31 on Jun 13, 2013 18:12:35 GMT -5
Hey ford power do u cut the bead off the inner? I tried stuffin this size toniight and couldnt get the stuffer all the way in? There was a hump that i couldnt get down! Now im stuck!
|
|