|
|
Post by nhderbyrunner on Sept 21, 2015 12:39:07 GMT -5
Here's the 81 citation I ran this weekend. Did pretty good. Floor fell out on 2nd or 3rd big hit so I rode on the ground the rest of the heat. The 2.5 ran without water for quite a while. Should have been the heat winner but it caught fire so they bumped me down. Not bad for a 3 day build. |
|
|
|
Post by smashem23 on Aug 7, 2016 13:55:46 GMT -5
I have an 81 skylark with the 2.8l v6 after it warms up it dies when I put it into gear but stays running with no load on the motor. Anyone got any ideas on what this could be. It ran perfectly fine for the first 5 minutes when I derbied it but once it got hot it acted like limp mode.
|
|
|
|
Post by smashbob12 on Aug 8, 2016 1:29:28 GMT -5
I have an 81 skylark with the 2.8l v6 after it warms up it dies when I put it into gear but stays running with no load on the motor. Anyone got any ideas on what this could be. It ran perfectly fine for the first 5 minutes when I derbied it but once it got hot it acted like limp mode. get rid of the junk feedback carb. |
|
|
|
Post by smashem23 on Aug 8, 2016 12:11:26 GMT -5
I have an 81 skylark with the 2.8l v6 after it warms up it dies when I put it into gear but stays running with no load on the motor. Anyone got any ideas on what this could be. It ran perfectly fine for the first 5 minutes when I derbied it but once it got hot it acted like limp mode. get rid of the junk feedback carb. What kind of other carb fits these? That's what I figured it was pry that carb they ain't nothing but problems according to online reviews and stuff. |
|
ba215
Future Icon
Posts: 1
|
Post by ba215 on Mar 25, 2018 0:10:29 GMT -5
Need tips on an 80s olds omega pretty much stock show any advice helps
|
|
