|
Post by smashem2269 on Aug 6, 2012 7:49:51 GMT -5
i have never an one i need help i have never ran compats period plz help asap
|
|
|
Post by LESTER-S19 on Aug 6, 2012 10:19:17 GMT -5
what do you need 2 know
|
|
|
Post by smashem2269 on Aug 6, 2012 14:32:05 GMT -5
weak points and how good are the motors n them?
|
|
|
Post by smashem2269 on Aug 6, 2012 14:33:59 GMT -5
and are they strong n how to build them lol
|
|
gimp
Heat Winner
Posts: 664
|
Post by gimp on Aug 6, 2012 16:12:05 GMT -5
Which engine does yours have? 2.5(4 cylinder) or 2.8(v6)? I personally like the 2.5 better. The cars themselves are strong. I would remove the rear hatch and beat the C piller in to help the rear roll up instead of down. all thread at the core support. seam weld. a good cage with a tank protector.
|
|
|
Post by hellbent09 on Aug 6, 2012 20:20:16 GMT -5
Take the rubber pucks out from in-between the k frame and core support and suck it down tight with all thread
|
|
|
Post by smashem2269 on Aug 6, 2012 21:47:58 GMT -5
alrite will do hatch is welded already i will beat pillars down thanks for info n ya its got a great runnning 2.5 in it i plan on running this weekend hopfully
|
|
gimp
Heat Winner
Posts: 664
|
Post by gimp on Aug 7, 2012 2:01:08 GMT -5
Do the k member thing hellbent is talking about. Makes a HUGE difference on the front end a car.
|
|
|
Post by smashem2269 on Aug 7, 2012 5:31:57 GMT -5
ok sure will do is compacts better to fun then full size?
|
|
|
Post by hellbent09 on Aug 7, 2012 8:08:10 GMT -5
Totally more fun jmo
|
|
|
Post by hellbent09 on Aug 7, 2012 8:13:24 GMT -5
Here is one I built last year turned out good blew the motor up
|
|
|
Post by smashem2269 on Aug 7, 2012 9:15:28 GMT -5
how are the stock bumpers on them and your car looks good
|
|
|
Post by hellbent09 on Aug 7, 2012 11:27:36 GMT -5
The back one can stay but I swapped to a Vic bumper up front
|
|
|
Post by C4 on Aug 7, 2012 12:00:24 GMT -5
i have never an one i need help i have never ran compats period plz help asap Ws hoping a thread for these would take off sometime. Whenever you are ready, I will change the title, and add it to the locator.
|
|
|
Post by smashem2269 on Aug 7, 2012 13:13:48 GMT -5
plz do sounds change it any time all i got is a loaded 76 chevy bumper n i cant run it may get a piece of 4 by 4 square tubing and change it to it or would that be to hard on the front end
|
|