|
Post by CHUNKY MONKEY 13 on Jul 19, 2012 23:53:16 GMT -5
I hope so i will have to get another pic tommarow i got the front suspension welded sollid it looks mean lol 18in to the bottom of the front bumper
|
|
|
Post by C4 on Jul 19, 2012 23:58:47 GMT -5
Looks like we were typing at the same time. I edited my last post & threw in a question. What is the wheelbase limit where you are running?
Also, if it is ok with you, I will change the title to suit all rwd Toys and stick this into the thread locator.
|
|
|
Post by CHUNKY MONKEY 13 on Jul 20, 2012 0:03:21 GMT -5
107" limit shure go for it
|
|
|
Post by C4 on Jul 20, 2012 0:05:12 GMT -5
Alright. I'll wait til after your first run with it to change the title, but I'll stick it there right now.
|
|
|
Post by CHUNKY MONKEY 13 on Jul 20, 2012 0:07:30 GMT -5
Ok ill try to keep pics updated as i build
|
|
|
Post by tude on Jul 20, 2012 0:11:32 GMT -5
if i recall rims from an accord will fit, and a pinto but need drilled out a litte bit..... at least for mine it was this way
|
|
|
Post by CHUNKY MONKEY 13 on Jul 20, 2012 0:17:21 GMT -5
I was thinking about that at the moment the front wheels are stock and the back ones are majorly butchered chavette wheels it will probably get 13in pinto wheels
|
|
|
Post by CHUNKY MONKEY 13 on Jul 20, 2012 20:06:00 GMT -5
|
|
|
Post by CHUNKY MONKEY 13 on Jul 20, 2012 20:27:04 GMT -5
|
|
|
Post by tude on Jul 22, 2012 0:02:32 GMT -5
Well mine is officially junk......broke a spark plug half way through, throttle stuck ( not that I could tell till the red flag). Alum rad, fan, and belt are junk and what took me out was I broke the slider at the rear end. Pics shortly. Tommarow I'll be chopping it apart and begin working on my bud blow out car
|
|
|
Post by tude on Jul 22, 2012 0:21:05 GMT -5
|
|
|
Post by C4 on Jul 22, 2012 0:34:09 GMT -5
Pics are worth way more than a thousand words. I forget what you used for an engine....4.3?
|
|
|
Post by tude on Jul 22, 2012 0:39:23 GMT -5
3.3 chevy i bought off of mewes
ya.... the front nosed high on it.... my neck is stiff but the 5 point harness was nice, only had to restart it once so i think i had it set up right
just noticed the sway bar, this morning it was infront and below the pulley protector.... i think it may be touching now.... hmmm ill look at that tommarow...
|
|
|
Post by CHUNKY MONKEY 13 on Jul 22, 2012 9:04:08 GMT -5
Looks like you had some fun.
|
|
|
Post by tude on Jul 22, 2012 9:49:30 GMT -5
First run was shear fun.... Second run was hey let's see how fast I can break everything.... Well I guess that is a little fun
|
|