50w
Future Icon
Posts: 129
|
Post by 50w on Apr 17, 2012 10:58:18 GMT -5
Just a warning, but it would be a good idea to drill holes through the purple steering wheel piece, and bolt it all the way through. I have pulled all the bolts out of the aluminum.
|
|
|
Post by superman180 on Apr 18, 2012 23:17:13 GMT -5
Second wheel done. ' Finished wet sanding and polishing out the logo that is going on the battery box. Thanks for looking and the advice!
|
|
|
Post by razorrob89 on Apr 20, 2012 13:52:44 GMT -5
Great thread u guys put together some nice stuff keep up the good work!
|
|
|
Post by superman180 on Apr 21, 2012 22:15:09 GMT -5
/\ Thanks! We are just about done with the fabrication then we will rebuild our transmissions, paint and bolt it all together... Got a little bit done today. This is all of our leaf spring clamps...
|
|
721
Heat Winner
Posts: 918
|
Post by 721 on Apr 23, 2012 21:10:31 GMT -5
I CANT WAIT FOR THE 727 BUILD IT WILL BE DERBY PORN BIG TIME.ANY GUY THAT HAS A COBRA 2000 GTL HAS MY 727 HELP IN PM'S ANYDAY JUST ASK
|
|
|
Post by superman180 on Apr 23, 2012 21:49:32 GMT -5
Thanks 721!!! ;D we will keep you in mind if we run into any trouble. Still getting all the little odds and ends put together.
|
|
|
Post by superman180 on Apr 29, 2012 2:44:05 GMT -5
|
|
|
Post by superman180 on Apr 30, 2012 0:00:18 GMT -5
|
|
|
Post by superman180 on Apr 30, 2012 15:38:48 GMT -5
Line up of switch plates. Superman, Flash & punisher cars.
|
|
DELOE324
Heat Winner
"OVER AND UNDER YOURS"
Posts: 239
|
Post by DELOE324 on May 1, 2012 18:24:28 GMT -5
evr consider selling those panels, also tuck the trunk dont cut the supports, then bolt the lower lid to frame
|
|
|
Post by mike89 on May 1, 2012 19:08:16 GMT -5
I GOT A QUESTION, ON YR SPIDER GEAR WELDUP... THE WAY IT LOOKS TO ME IS U WELDED THE AXLE TO THE CENTER PIN??? IT IS A BOLT IN AXLE CORRECT?IF SO WHAT IF U BREAK AN AXLE,HOW WILL YOU REPLACE IT BEING WELDED TO THE PIN? CORRECT ME IF IM WRONG... YOU GUYS HAVE SUM REALLY NICE EQUIPTMENT TO WORK WITH! CAN I GET A FEW PICKS OF YR PRESS? LOOKING TO BUILD ONE FOR MY SHOP... THANKS MIKE..
|
|
|
Post by superman180 on May 1, 2012 19:22:22 GMT -5
The axles are not welded in, you have to remove the axles to pull out the 3rd member so you couldn't really do that on the 8 3/4.
I will try to remember to take a few pics of the press.
Thanks for looking. Mike.
|
|
|
Post by superman180 on May 6, 2012 0:30:04 GMT -5
A couple more pics. steering wheel brace sanded primed and welded.
|
|
|
Post by superman180 on May 7, 2012 1:06:30 GMT -5
|
|
hemi1
Feature Winner
Posts: 2,425
|
Post by hemi1 on May 7, 2012 11:38:23 GMT -5
very nice work,ever thought of becoming a vendor in the vendor section ? your work and attention to detail are awsome.
|
|